Logo
Ru| En

Office: M. Baumanskaya

Warehouse: Lenin Hills

Domestic sewerage

Home→ Catalog→ Sewerage→ Domestic sewerage

The internal sewerage system is one of the most important engineering systems of the building, and for its installation it is necessary to use high-quality pipes and fittings.

We supply products only from brands that have been proven over the years, producing pipes and fittings made of PVC, PP, cast iron and steel. All products meet all sanitary requirements, are made only from high-quality raw materials and are distinguished by reliability and durability.

This section presents not only pipes with fittings, but also additional equipment needed for sewerage installation:

  • plumbing siphons;
  • traps;
  • shower trays;
  • pipes for toilet bowls;
  • non-return valves;
  • air valves.
Photo Наименование Article Цена
Photo Draft
Photo [NO LONGER PRODUCED. REPLACEMENT: 310.083.14.1] - Geberit Silent-db20 corner branch fitting 88.5°, d 110 x 110 [Code number: 310.103.14.1] Draft [NO LONGER PRODUCED. REPLACEMENT: 310.083.14.1] - Geberit Silent-db20 corner branch fitting 88.5°, d 110 x 110 [Code number: 310.103.14.1]
[NO LONGER PRODUCED. REPLACEMENT: 310.083.14.1] - Geberit Silent-db20 corner branch fitting 88.5°, d 110 x 110 [Code number: 310.103.14.1]
Details 		310.103.14.1

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For building drainage
  • For buildings with increased sound insulation requirements

Characteristics:

  • Abrasion resistant;
  • Sound-absorbing;
  • UV-resistant.

Material: PE-S2

d d1 X1 X2 X3 H K1
mm mm cm cm cm cm cm
110 110 13,5 10 9 22,5 4,5
Photo Draft
Photo [NO LONGER PRODUCED] - Geberit contact foil with flange, Resistit, for floor drain 363.653 and 364.673 [Code number: 363.662.00.1] Draft [NO LONGER PRODUCED] - Geberit contact foil with flange, Resistit, for floor drain 363.653 and 364.673 [Code number: 363.662.00.1]
[NO LONGER PRODUCED] - Geberit contact foil with flange, Resistit, for floor drain 363.653 and 364.673 [Code number: 363.662.00.1]
Details 		363.662.00.1

ATTENTION! This product is temporarily unavailable for order!

Size L
mm cm
500 x 500 50

Compatible with:

Product name Code number
   
Geberit floor drain, outlet d 56/63 364.673.00.1
Geberit floor drain, outlet d 50/56 363.653.00.1
Photo Draft
Photo [NO LONGER PRODUCED] - Geberit HDPE Waste manifold, d110 [Code number: 367.612.16.1] Draft [NO LONGER PRODUCED] - Geberit HDPE Waste manifold, d110 [Code number: 367.612.16.1]
[NO LONGER PRODUCED] - Geberit HDPE Waste manifold, d110 [Code number: 367.612.16.1]
Details 		367.612.16.1

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For all drainage pipes

Characteristics:

  • UV-resistant
  • Four connection options, closed

Material: PE-HD

d d1 Colour
mm mm  
110 56 black
Photo Draft
Photo [NO LONGER PRODUCED] - Geberit HDPE Connection pipe for floor-mounted WC, d110 x 120 [Code number: 367.885.16.1] Draft [NO LONGER PRODUCED] - Geberit HDPE Connection pipe for floor-mounted WC, d110 x 120 [Code number: 367.885.16.1]
[NO LONGER PRODUCED] - Geberit HDPE Connection pipe for floor-mounted WC, d110 x 120 [Code number: 367.885.16.1]
Details 		367.885.16.1

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For building drainage
  • For sleeves
  • For sanitary appliances with vertical outlet

Characteristics:

  • UV-resistant

Scope of delivery:

  • Sleeve

Material: PE-HD

d di D H h K
mm mm cm cm cm cm
110 120 13.2 38 33 26
Photo Draft
Photo [NO LONGER PRODUCED] - Geberit HDPE Bend with connector for floor-mounted WC, with two lateral connections, d 50 [Code number: 367.888.16.1] Draft [NO LONGER PRODUCED] - Geberit HDPE Bend with connector for floor-mounted WC, with two lateral connections, d 50 [Code number: 367.888.16.1]
[NO LONGER PRODUCED] - Geberit HDPE Bend with connector for floor-mounted WC, with two lateral connections, d 50 [Code number: 367.888.16.1]
Details 		367.888.16.1

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For building drainage
  • For sanitary appliances with vertical outlet

Characteristics:

  • UV-resistant
  • Lateral connections raised and closed

Material: PE-HD

d d1 di A D
mm mm mm cm cm
110 50 110 2 11.6
H L L1 X1 X2
cm cm cm cm cm
17 17.5 14 30 6
Photo Draft
Photo [NO LONGER PRODUCED] - Geberit Ready-to-fit set for floor drain 388.001 [Code number: 388.005.00.1] Draft [NO LONGER PRODUCED] - Geberit Ready-to-fit set for floor drain 388.001 [Code number: 388.005.00.1]
[NO LONGER PRODUCED] - Geberit Ready-to-fit set for floor drain 388.001 [Code number: 388.005.00.1]
Details 		388.005.00.1

ATTENTION! This product is temporarily unavailable for order!

Application purpose

  • For use within buildings

Characteristics

  • Frame and design cover made of stainless steel
  • Design cover can be turned over and tiled
  • Not weight-bearing
  • Easy maintenance and cleaning

Scope of delivery

  • Design cover
  • Frame and grating
  • Protection cover
  • Rubber seal EPDM

Compatible with:

Geberit floor drain HDPE, d 75 mm [Code number: 388.001.00.1]
Photo Draft
Photo [Temporarily out of stock] - VIEGA Bottle odour trap, chrome-plated, G 1 1/4", d 32 [Code number: 456580] Draft [Temporarily out of stock] - VIEGA Bottle odour trap, chrome-plated, G 1 1/4", d 32 [Code number: 456580]
[Temporarily out of stock] - VIEGA Bottle odour trap, chrome-plated, G 1 1/4", d 32 [Code number: 456580]
Details 		456580
Photo
Photo [NO LONGER PRODUCED] - VIEGA Eleganta 2 Bottle odour trap, chrome-​plated brass, d 1 1/4" x 1 1/4" [Code number: 493981]
[NO LONGER PRODUCED] - VIEGA Eleganta 2 Bottle odour trap, chrome-​plated brass, d 1 1/4" x 1 1/4" [Code number: 493981]
Details 		493981

Application purpose:

  • For washbasins

Characteristics:

  • chrome-plated brass
  • Eleganta 2 Bottle odour trap

Components:

  • adjusting pipe 200 mm
  • drain pipe 310 mm
  • rosette Ø32xØ80xH15 mm
G DN
  mm
1 1/4" 32
Photo
Photo [NO LONGER PRODUCED] - VIEGA Eleganta 3 Bottle odour trap, chrome-​plated brass, d 1 1/4" x 1 1/4" [Code number: 493998]
[NO LONGER PRODUCED] - VIEGA Eleganta 3 Bottle odour trap, chrome-​plated brass, d 1 1/4" x 1 1/4" [Code number: 493998]
Details 		493998

Application purpose:

  • For washbasins

Characteristics:

  • chrome-plated brass
  • Eleganta 3 Bottle odour trap

Components:

  • adjusting pipe 200 mm
  • drain pipe 310 mm
  • rosette Ø32xØ80xH15 mm
G DN
  mm
1 1/4" 32
Photo
Photo [NO LONGER PRODUCED] - Ostendorf Double branch 45°, d - 50/50 [Code number: 904018]
[NO LONGER PRODUCED] - Ostendorf Double branch 45°, d - 50/50 [Code number: 904018]
Details 		904018

Application purpose:

  • For drainage systems
  • For branching pipeline

Characteristics:

  • PP
  • Max. working temperature +95°C

Main advantages of Ostendorf pipelines:

  • Low weight
  • Strength
  • Reliability
  • Durability
  • Low noise
  • Resistance to high temperatures
  • Efficiency
d d1 α
mm mm  
50 50 45°
Photo Draft
Photo [DISCONTINUED. REPLACEMENT: HL 090.5E] - Hutterer & Lechner siphon PRIMUS, flat, complete for HL 90Pr [Code number: HL 2090] (Russia) Draft [DISCONTINUED. REPLACEMENT: HL 090.5E] - Hutterer & Lechner siphon PRIMUS, flat, complete for HL 90Pr [Code number: HL 2090] (Russia)
[DISCONTINUED. REPLACEMENT: HL 090.5E] - Hutterer & Lechner siphon PRIMUS, flat, complete for HL 90Pr [Code number: HL 2090] (Russia)
Details 		HL 2090 2 457 rub

HL 2090 - it is special "dry" siphon "Primus" with capacity of 0,43 l/s. It is made of polypropylene. Depth of trap seal is 30 mm. The device protects premises against sewer smells when drying trap seal. For drains HL 90(Pr) series.

Capacity Material Weight
l/s   gr
0,43 polypropylene 85
Photo Draft
Photo [DISCONTINUED. REPLACEMENT: HL 090.5EKK] - Hutterer & Lechner siphon PRIMUS, flat, for system "Klick-Klack" [Code number: HL 2090KK] (Russia) Draft [DISCONTINUED. REPLACEMENT: HL 090.5EKK] - Hutterer & Lechner siphon PRIMUS, flat, for system "Klick-Klack" [Code number: HL 2090KK] (Russia)
[DISCONTINUED. REPLACEMENT: HL 090.5EKK] - Hutterer & Lechner siphon PRIMUS, flat, for system "Klick-Klack" [Code number: HL 2090KK] (Russia)
Details 		HL 2090KK 2 457 rub

HL 2090KK - it is special "dry" siphon "Primus" with capacity of 0,43 l/s. It is made of polypropylene. Depth of trap seal is 30 mm. The siphon is used for improving the drains HL 90(Pr-3000) series. The device protects premises against sewer smells when drying trap seal.

Capacity Material Weight
l/s   gr
0,43 polypropylene 85
Photo
Photo [DISCONTINUED. REPLACEMENT: HL 3000FPrblue] - Hutterer & Lechner Extension system "Klick-Klack", with syfon PRIMUS and supporting frame, d 110mm [Code number: HL 3000FPr]
[DISCONTINUED. REPLACEMENT: HL 3000FPrblue] - Hutterer & Lechner Extension system "Klick-Klack", with syfon PRIMUS and supporting frame, d 110mm [Code number: HL 3000FPr]
Details 		HL 3000FPr

Characteristics of HL sewage equipment:

  • Complies with ISO 9001
  • Safety for ecology and health
  • Products undergo laboratory testing
  • Durability
  • Attractive appearance

Детали:

  • Grating "Klick-Klack"
  • Syfon HL 2090KK
Diameter Weight
mm kg/pc
110 0,424
Photo Draft
Photo [DISCONTINUED. REPLACEMENT: HL 90Prblue] - Hutterer & Lechner Floor drain with flange, sifon PRIMUS, sifon height 30mm, extension 12-70mm, horizontal, DN40/50 [Code number: HL 90Pr] (Russia) Draft [DISCONTINUED. REPLACEMENT: HL 90Prblue] - Hutterer & Lechner Floor drain with flange, sifon PRIMUS, sifon height 30mm, extension 12-70mm, horizontal, DN40/50 [Code number: HL 90Pr] (Russia)
[DISCONTINUED. REPLACEMENT: HL 90Prblue] - Hutterer & Lechner Floor drain with flange, sifon PRIMUS, sifon height 30mm, extension 12-70mm, horizontal, DN40/50 [Code number: HL 90Pr] (Russia)
Details 		HL90Pr 6 237 rub

Application purpose:

  • For draining wastewater from floor level
  • For installation inside buildings

Characteristics:

  • release type: horizontal;
  • low mounting height - only 69 mm;
  • there is a "dry" siphon "Primus" (the height of the water seal is 30 mm);
  • it is possible to use in screeds with a thickness of not more than 100 mm;
  • the height of the extension element can be adjusted from 12 to 70 mm by cutting (it is also possible to use extensions);
  • the temperature of the drains should not exceed +85°C (it is possible to increase up to +100°C for a short period of time - no more than 200 liters);
  • suitable for installation with socket pipes made of PE and PP;
  • warranty: 1 year;
  • service life: 50 years.

Technical characteristics

Diameter Capacity Load Weight
DN, mm l/s kg gr
40/50 0,43 300 510
 
Material of spare parts
Grate Sifon Extension Grate frame Body
         
stainless steel polypropylene polypropylene polypropylene polyethylen
 
Packaging data (carton)
Height Width Depth Weight Volume
mm mm mm kg m3
155 225 295 0,848 0,010288125

Documentation

Download example of product installation:  Floor drain HL 90Pr

Photo Draft
Photo [DISCONTINUED. REPLACEMENT: HL 90Prblue-3000] - Hutterer & Lechner Floor drain with flange, sifon PRIMUS, sifon height 30mm, extension 12-70mm, horizontal, DN40/50 [Code number: HL 90Pr-3000] (Russia) Draft [DISCONTINUED. REPLACEMENT: HL 90Prblue-3000] - Hutterer & Lechner Floor drain with flange, sifon PRIMUS, sifon height 30mm, extension 12-70mm, horizontal, DN40/50 [Code number: HL 90Pr-3000] (Russia)
[DISCONTINUED. REPLACEMENT: HL 90Prblue-3000] - Hutterer & Lechner Floor drain with flange, sifon PRIMUS, sifon height 30mm, extension 12-70mm, horizontal, DN40/50 [Code number: HL 90Pr-3000] (Russia)
Details 		HL90Pr-3000 8 665 rub

Application purpose:

  • For draining wastewater from floor level
  • For installation inside buildings

Characteristics:

  • release type: horizontal;
  • low mounting height - only 69 mm;
  • there is a "dry" siphon "Primus";
  • if the diameter of the connected pipe is 40 mm, then the section of the outlet pipe with DN50 should be cut off;
  • the height of the extension can be adjusted from 10 to 80 mm by cutting (it is also possible to use extensions);
  • the temperature of the drains should not exceed +85°C (it is possible to increase up to +100°C for a short period of time - no more than 200 liters);
  • corresponds to GOST 23289-94;
  • warranty: 1 year;
  • service life: 50 years.

Produced in Russia.

Technical characteristics

Diameter Capacity Load Weight
DN, mm l/s kg gr
40/50 0,43 300 708
 
Material of spare parts
Grate Sifon Extension Grate frame Body
         
stainless steel polypropylene polypropylene stainless steel polyethylen
 
Packaging data (carton)
Height Width Depth Weight Volume
mm mm mm kg m3
155 225 295 0,9 0,010288125

Documentation

Download example of product installation:  Floor drain HL 90Pr-3000

Photo Draft
Photo [DISCONTINUED. REPLACEMENT: HL 90Prblue-3020] - Hutterer & Lechner Floor drain with trap Primus and extension with tilable frame, horizontal, DN40/50 [Code number: HL 90Pr-3020] (Russia) Draft [DISCONTINUED. REPLACEMENT: HL 90Prblue-3020] - Hutterer & Lechner Floor drain with trap Primus and extension with tilable frame, horizontal, DN40/50 [Code number: HL 90Pr-3020] (Russia)
[DISCONTINUED. REPLACEMENT: HL 90Prblue-3020] - Hutterer & Lechner Floor drain with trap Primus and extension with tilable frame, horizontal, DN40/50 [Code number: HL 90Pr-3020] (Russia)
Details 		HL 90Pr-3020 16 639 rub

Floor drain HL 90Pr-3020 is designed for installation inside buildings. It has horizontal outlet DN40/50. The drain has mould for tiles 112х112 mm - it is made of stainless steel and polypropylene. Size of grate frame is 132х132 mm. Capacity is 0,43 l/s. The drain can endure load up to 300 kg. Also the drain is equipped with a siphon PRIMUS.

Diameter Capacity Load Weight
DN, mm l/s kg gr
40/50 0,43 300 570
 
Material of spare parts
Mould for tiles Extension Trap cartridge Grate frame Body
         
stainless steel polypropylene polypropylene stainless steel polyethene

Documentation

Download example of product installation:  Floor drain HL 90Pr-3020

Photo Draft
Photo Round access pipe PAM-GLOBAL® S Photo Round access pipe PAM-GLOBAL® S Photo Round access pipe PAM-GLOBAL® S Draft Round access pipe PAM-GLOBAL® S
1 2
Round access pipe PAM-GLOBAL® S
Details
Nominal internal diameter H D1 D2 L Weight Code number
DN         kg  
50 64 53 105 190 2,3 179191
70* 69 73 125 210 2,9 155799
80 73 73 125 210 3,2 179647
100 84 104 159 260 5,0 179192
125   152 202 280 7,0 280010
150   180 243 320 9,8 280012
200   180 243 360 12,9 280013
250   180 274 380 18,7 280014
300   180 326 400 25,0 280015

Dimensions are presented in mm

*Diameter 80 gradually replace diameter 70
Photo Draft
Photo Eccentric reducer PAM-GLOBAL® S Photo Eccentric reducer PAM-GLOBAL® S Photo Eccentric reducer PAM-GLOBAL® S Draft Eccentric reducer PAM-GLOBAL® S
1 2 3
Eccentric reducer PAM-GLOBAL® S
Details
Nominal internal diameter A L t1 t2 Weight Code number
DN         kg  
70x50 10 75 35 30 0,5 155763
80x50* 13 80 35 30 0,7 176727
100x50 25 80 40 30 0,8 155764
100x70* 16 85 40 35 0,9 155801
100x80 14 90 40 35 1,0 176728
125x50 38,5 85 45 30 1,5 155765
125x70* 28,5 90 45 35 1,3 155802
125x80 26 95 45 35 1,3 176730
125x100 12,5 95 45 40 1,6 155842
150x50 51 95 50 30 1,9 155766
150x70* 41 100 50 35 2,0 155803
150x80 39 100 80 35 2,0 176732
150x100 25 105 50 40 2,0 155843
150x125 12,5 110 50 45 2,0 155892
200x75 64 115 43 72 3,8 156532
200x100 50 115 60 40 3,6 155844
200x125 37,5 120 60 45 3,8 155893
200x150 25 125 60 50 4,3 155922
250x100 82 125 45 82 6 156690
250x150 57 140 70 50 6,8 155923
250x200 32 145 70 60 7,0 155942
300x100 108 140 45 95 9,4 156692
300x150 83 150 80 50 10,7 155924
300x200 58 160 80 60 11,4 155943
300x250 26 170 80 70 12,4 155955
400x300 52 200 100 100 19,6 157163

Dimensions are presented in mm

*Diameter 80 gradually replace diameter 70
Photo Draft
Photo 45˚ single branch PAM-GLOBAL® S Photo 45˚ single branch PAM-GLOBAL® S Draft 45˚ single branch PAM-GLOBAL® S
1 2
45˚ single branch PAM-GLOBAL® S
Details
Nominal internal diameter X1 X2 X3 L Weight Code number
DN         kg  
50x50 50 135 135 185 1,4 155769
70x50* 40 150 150 190 1,5 155789
80x50 45 135 135 180 1,6 173786
70x70* 55 160 160 215 2,1 155806
80x80 60 155 155 215 2,2 173787
100x50 35 165 165 200 2,4 155828
100x70* 50 185 185 235 2,7 155831
100x80 50 170 170 220 2,8 173788
100x100 70 205 205 275 3,8 155857
125x50 20 185 185 205 3,2 155877
125x70* 40 200 200 240 4,1 155879
125x80 45 200 195 240 4,2 176716
125x100 60 220 220 280 5,6 155882
125x125 80 240 240 320 5,7 155895
150x70* 30 215 215 245 5,2 155910
150x80 50 220 220 255 5,9 176733
150x100 55 240 240 295 6,1 155912
150x125 70 255 255 325 7,0 155914
150x150 90 265 265 355 8,8 155926
200x70* 15 240 240 255 7,2 155934
200x80 20 240 240 260 7,3 176734
200x100 40 265 265 305 8,6 155935
200x125 55 280 280 335 11,4 155936
200x150 75 300 300 375 11,6 155937
200x200 115 340 340 455 16,8 155944
250x100 15 315 315 330 13,6 155949
250x125 35 335 335 370 16,0 155950
250x150 55 350 350 405 17,3 155951
250x200 90 390 390 480 22,4 155952
250x250 130 430 430 560 29,0 155956
300x100 5 345 345 350 19,3 155961
300x125 15 360 360 375 21,0 155962
300x150 35 380 380 415 28,0 155963
300x200 70 440 415 485 28,1 155964
300x250 115 465 465 580 37,6 155965
300x300 115 505 505 660 46,3 155968
400x300 105 555 555 660 56,4 157178
400x400 190 645 645 835 98 157185

Dimensions are presented in mm

* Diameter 80 gradually replace diameter 70
Photo Draft
Photo Branch trap PAM-GLOBAL® S Photo Branch trap PAM-GLOBAL® S Draft Branch trap PAM-GLOBAL® S
1 2
Branch trap PAM-GLOBAL® S
Details

Branch traps PAM-GLOBAL® S with nominal diameter of 50-200 mm can be mounted on a vertical and horizontal pipeline (the vertical pipeline must be fixed). The branch trap is installed vertically to maintain a sufficient depth of the water seal. The branch trap can be installed both to pipeline-collector and to pressure riser. On the branch trap body are printed arrows which are indicating the direction of flow.

Nominal internal diameter I h X1 X2 X3 X4 W Weight Code number
DN               kg  
50 190 250 182 68 122 68 60 2,9 156420
70* 265 293 200 93 172 93 60 5,0 156521
80 265 293 200 93 172 93 60 5,9 176714
100 325 392 282 110 215 110 100 9,5 156668
125 390 446 316 130 260 130 100 14,4 156801
150 470 493 348 145 325 145 100 21,8 156912
200 600 600 420 180 400 200 100 38,4 157018

Dimensions are presented in mm

*Diameter 80 gradually replace diameter 70

 

Installation examples:
© Inrusstrade.ru 1999-2026. "Inrusstrade" Ltd. Copying and quoting is prohibited