Domestic sewerage of buildings

Watch products by Brands

The internal sewerage system is one of the most important engineering systems of the building, and for its installation it is necessary to use high-quality pipes and fittings.

We supply products only from brands that have been proven over the years, producing pipes and fittings made of PVC, PP, cast iron and steel. All products meet all sanitary requirements, are made only from high-quality raw materials and are distinguished by reliability and durability.

This section presents not only pipes with fittings, but also additional equipment needed for sewerage installation:

plumbing siphons;
traps;
shower trays;
pipes for toilet bowls;
non-return valves;
air valves.

Photo Наименование Article Цена

Bend PAM-GLOBAL® Plus 15˚

Details

Nominal internal diameter	X	Weight	Code number
DN	mm	kg
50	40	0,47	155202
80	45	0,68	176781
100	50	1,15	155237
125	60	1,77	155262
150	65	2,40	155278
200	80	4,40	173774
400	100	21,40	on order

1 2 3

Blank end PAM-GLOBAL® S

Details

Nominal internal diameter	L	Weight	Code number
DN	mm	kg
50	30	0,3	155747
70*	35	0,4	155776
80	35	0,5	176700
100	40	0,8	155809
125	45	1,2	155865
150	50	1,7	155898
200	60	3,2	155928
250	70	5,9	155945
300	80	10,0	155957

* Diameter 80 gradually replace diameter 70

45˚ single branch PAM-GLOBAL® Plus

Details

Nominal internal diameter	X₁	X₂	X₃	L	Weight	Code number
DN					kg
50x50	50	135	135	185	1,35	155213
80x50	45	135	135	180	1,60	176740
80x80	60	155	155	215	2,20	176742
100x50	35	165	165	200	2,40	155245
100x80	50	170	170	220	2,75	176743
100x100	70	205	205	275	3,8	155255
125x50	20	185	185	205	3,24	155264
125x80	51	189	189	240	4,20	176784
125x100	60	220	220	280	5,60	155267
125x125	80	240	240	320	5,70	155271
150x80	50	220	220	255	5,30	176785
150x100	55	240	240	295	6,12	155281
150x125	70	255	255	325	7,00	155282
150x150	90	265	265	355	8,75	155285
200x80	20	240	240	260	7,34	176786
200x100	40	265	265	305	8,64	155291
200x125	55	280	280	335	11,60	155292
200x150	75	300	300	375	11,43	155293
200x200	115	340	340	455	16,78	155295
250x150	55	350	350	405	22	208730
250x200	90	390	390	480	22,4	155483
250x250	130	430	430	580	29	155490
300x250	115	465	465	580	37,6	155500
300x300	155	505	505	660	46,3	155507
400x300	105	555	555	660	56,4	155510
400x400	190	645	645	835	98	on order

Dimensions are presented in mm

PAM-GLOBAL® Plus Double branch 45°

Details

Nominal internal diameter	X₁	X₂	X₃	L	Weight	Code number
DN	mm	mm	mm	mm	kg
100x100x100	70	190	190	260	4,6	155384
125x125x125	65	240	240	305	7,9	155411
150x150x150	90	265	265	355	11,8	155445
200x200x200	115	340	340	455	18,4	155473

Blank end PAM-GLOBAL® Plus

Details

Nominal internal diameter	L	Weight	Code number
DN	mm	kg
50	30	0,25	155197
80	35	0,45	176783
100	40	0,80	155231
125	45	1,20	155257
150	50	1,70	155273
200	60	3,20	155287
250	70	5,90	155477
300	80	10	155494

Photo Round access pipe PAM-GLOBAL® Plus

Round access pipe PAM-GLOBAL® Plus

Details

Nominal internal diameter	H	D₁	D₂	L	Weight	Code number
DN					kg
50	64	53	105	190	2,3	179348
70						179349
80	73	78	134	220	3,2	179648
100	84	104	159	260	5,0	179350

Dimensions are presented in mm

PAM-GLOBAL® S Double branch 45°

Details

Nominal internal diameter	X₁	X₂	X₃	L	Weight	Code number
DN	mm	mm	mm	mm	kg
100x100x100	70	190	190	260	5,3	156709
125x100x100	60	220	220	280	6,3	257729
125x125x125	75	230	230	305	7,5	156817
150x100x100	55	225	225	280	7,3	156865
150x150x150	90	270	270	360	12,0	156936
200x200x200	115	340	340	455	18,4	157034

PAM-GLOBAL® S Iron flange fitting for roof penetration

Details

To reliable the installation ventilation pipes through the roof, you should use the specially designed element - PAM-GLOBAL^® S Iron flange fitting for roof penetration.

Profile seal is inserted between the pipe and flange fitting for roof penetration so that the flange fitting is waterproof. The flange fitting is produced with sealing ring made of EPDM or NBR.

The first flange fitting is installed under the roof insulation layer, and the second flange fitting - above the roof insulation layer. Accordingly the first flange fitting "clamps" еру vapor barrier and the second flange fitting "clamps" waterproofing layer, be it polymer or bituminous.

Nominal internal diameter	D	d	Lk Ø	h	Weight	Code number
DN	mm	mm	mm	mm	kg
80	286	135	215	60	6,1	205922
100	324	158	246	60	6,6	205924
125	349	188	271	60	7,5	205925

Wavin air-valve, d 75, 110 [Code number: 4065752 / 24399880]

Details

4065752

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

For domestic drainage systems

Description

Wavin Optima air-valve is suitable for the installation of domestic sewerage systems. It is installed for admission air to the sewerage system, so that vacuum in systems without a ventilation outlet to the street do not prevent.

It is not recommended to use the air-valve in the low temperature range, as the valve is not working when the condensate cools in the internal cavity.

Technical characteristics

Material: polypropylene (PP).

Color: white.

Dy	F	H1	H2
mm	mm	mm	mm
75/110	125	90	135

Hutterer & Lechner Tubular trap with appliance hose connector and ball-joint outlet, DN40x1 1/2' [Code number: HL 100/40]

Details

HL 100/40

2 516 rub

Tubular trap HL 100/40 DN 40 horizontal is made of polypropylene. The device is equipped with ball-joint outlet and appliance hose connector 6/4". In addition, the trap can connect to the washing machine or dishwasher, which uses input 3/4".

Diameter	Material	Weight
DN, mm		gr
40	polypropylene	260

Documentation

Download data sheet: Tubular trap HL 100/40

Download example of product installation: Tubular trap HL 100/40

Hutterer & Lechner Wash-basin trap with rosette, DN32x1 1/4' [Code number: HL 132/30]

Details

HL 132/30

1 862 rub

HL 132/30 wash-basin trap DN32 x 1 1/4' horizontal is connected to a wash basin. It is made of polypropylene and has a weight is 180 grams. The wash-basin trap can connect to a dishwasher or washing machine, height of the dip tube is adjusted. HL 132/30 is equipped with a decorative rosette.

Diameter	Material	Weight
DN, mm		gr
32	polypropylene	180

Download data sheet: Wash-basin trap HL 132/30

Hutterer & Lechner Bath tub trap with ball-joint, DN40/50x1 1/2' [Code number: HL 500-6/4]

Details

HL 500-6/4

2 388 rub

Application area:

For bath

Characteristics:

Material: PP/PE
Dimension: DN40/50 x 6/4"
Capacity: 0,83 l/s
Installation height: 93 mm

Weight: 0,17 kg

Packaging data (PE-bag)

Height	Width	Depth	Weight	Volume
mm	mm	mm	kg	m3
80	100	252	0,176	0,002016000

Documentation

Download example of product installation: Bath tub trap HL 500-6/4

Hutterer & Lechner Shower block flat 1200 x 256 x 85 mm with horizontal outlet DN50, "Primus" trap, without visible parts [Code number: HL 530F.0]

Details

HL 530F.0

Shower block HL 530F.0 with horizontal outlet DN50 is intended for near-wall installation. Shower block can use for removing wastewater with temperature to 85 °C. Size of shower block is 256x85x1200 mm. Shower block is equipped with siphone Primus, which is securely "lock" sewer smells. Without visible parts.

Size	Diameter	Capacity	Weight
mm	DN, mm	l/s	gr
256x 85 x 1200	50		1607

Material of spare parts

Siphone	Shower block

polypropylene	Grundk. EPS

Photo Hutterer & Lechner Anti-flood valve with electronically controlled flap, additional flap and manual blocking, DN160 [Code number: HL 715.2EPC]

Draft Hutterer & Lechner Anti-flood valve with electronically controlled flap, additional flap and manual blocking, DN160 [Code number: HL 715.2EPC]

Hutterer & Lechner Anti-flood valve with electronically controlled flap, additional flap and manual blocking, DN160 [Code number: HL 715.2EPC]

Details

HL715.2EPC

358 681 rub

Application purpose:

To reduce the likelihood of flooding basements and semi-basements where there is a risk of reverse current

Characteristics:

works in automatic mode;
working environment: drains (both non-faecal and faecal) with temperature from 0 to +40°C;
working pressure is 0-5 meters of water column;
the shutter consists of two chambers, and each has a shutter and an inspection hatch;
the first damper located in the direction of movement of the drains is equipped with an electric drive (opening time does not exceed 11 seconds);
the damper in the second chamber can be fixed in the closed position manually;
there is a backup power supply (working time: up to 168 hours);
shutter operation is controlled by an electronic control unit;
data on the state of the shutter can be transferred to the dispatching console (there are "dry" contacts for this, switching current 220V / 0.5A);
release type: smooth horizontal;
mounted with socket pipes made of PP and PVC;
power supply: 230V (+10%/-15%), 0.5A, 50Hz;
cable length is 6 m.

Attention! The sewer closure must be installed in a non-explosive environment. Also, it cannot be installed in sewer shafts on the street.

Technical characteristics

Diameter	Main voltage	Weight
DN, mm	Volt	gr
160	220	7973

Material of spare parts

Butterfly nuts	Flap	Body

ABS	stainless steel	ABS

Packaging data (carton)

Height	Width	Depth	Weight	Volume
mm	mm	mm	kg	m3
385	280	635	9,38	0,068453

Documentation

Download data sheet: Anti-flood valve HL 715.2EPC

WC bend 90˚ PAM-GLOBAL® S

Details

Nominal internal diameter	X₁	X₂	X₃	X₄	Weight	Code number
DN	mm	mm	mm	mm	kg
80	145	55	50	105	2,0	176725
100	150	44	40	84	2,6	155852

1 2

Bend PAM-GLOBAL® S 15˚

Details

Nominal internal diameter	X	Weight	Code number
DN	mm	kg
50	40	0,5	155752
70*	45	0,6	155781
80	45	0,7	176702
100	50	1,2	155816
125	60	1,8	155870
150	65	2,4	155903
200	80	4,4	155932

*Diameter 80 gradually replace diameter 70

Photo Rectangular access pipe PAM-GLOBAL® S

1 2 3

Rectangular access pipe PAM-GLOBAL® S

Details

Nominal internal diameter	H	G	d	A	F	L	Weight	Code number
DN							kg
100	83	160	100	200	230	340	7,6	179196
125	101	190	125	225	255	370	10,3	179197
150	112	215	150	250	280	395	14,5	179198
200	137	262	200	300	330	485	22,0	179199
250	170	330	260	350	380	540	38,5	179200
300	195	380	310	400	430	610	50,0	179201

Dimensions are presented in mm

1 2 3

Expansion plug PAM-GLOBAL® S

Details

Code number	L	Weight	Code number
DN	mm	kg
50	33	0,2	156374
70*	52	0,4	156468
80	63	0,5	176715
100	55	1,0	156579
125	53	1,3	156747
150	53	2,1	156839
200	63	4,2	156961
250	53	6,2	157060
300	56	9,0	157125

* Diameter 80 gradually replace diameter 70

Photo 88˚ single branch PAM-GLOBAL® S with angle of entry 45˚

1 2

88˚ single branch PAM-GLOBAL® S with angle of entry 45˚

Details

Nominal internal diameter	X₁	X₂	X₃	L	Weight	Code number
DN					kg
50x50	79	80	66	145	1,0	155767
70x50*	83	90	72	155	1,3	155787
80x50	85	90	75	160	1,4	176718
70x70*	97	95	83	180	1,7	155804
80x80	95	95	85	180	1,8	176719
100x50	94	105	76	170	2,1	155827
100x70*	102	110	88	190	2,3	155829
100x80	100	110	90	190	2,4	176720
100x100	115	115	105	220	2,7	155855
125x50	98	120	82	180	2,8	155876
125x70*	107	125	93	200	2,9	155878
125x80	105	125	100	205	3,0	176722
125x100	125	130	110	235	4,2	155880
125x125	137	135	123	260	5,0	155894
150x50	100	140	100	200	3,9	155908
150x70*	115	140	100	215	4,4	155909
150x80	115	140	105	220	4,4	176723
150x100	130	145	115	245	4,9	155911
150x125	147	150	128	275	6,1	155913
150x150	158	155	142	300	8,5	155925
200x100	145	175	125	270	8,8	156980
200x200	193	183	172	365	10,4	157024
250x250	240	243	228	455	19,5	157102
300x300	265	265	265	530	35	157165
400x400	370	370	314	684	67	170732

Dimensions are presented in mm

* Diameter 80 gradually replace diameter 70

68˚ double branch PAM-GLOBAL® S

Details

Nominal internal diameter	X₁	X₂	X₃	L	Weight	Code number	Old code number
DN					kg
50x50x50	60	85	85	145	1,2	156437
75x75x75	70	110	110	180	2,3	156546
100x75x75	70	125	115	185	3	156609
100x100x100	85	130	130	215	3,4	156707	155859
125x100x100	85	145	140	225	4,5	156766	155875
125x125x125	100	155	155	255	5,5	156815
150x125x125	100	170	165	265	6,6	156867
150x150x150	115	180	180	295	8,2	156934
200x150x150	110	210	200	310	10,7	156978
200x200x200	140	225	225	365	14	157032

Dimensions are presented in mm