Anti-flood valves

Application purpose:

• To reduce the likelihood of flooding basements and semi-basements where there is a risk of reverse current

Characteristics:

• works in automatic mode;
• working environment: drains (both non-faecal and faecal) with temperature from 0 to +40°C;
• working pressure is 0-5 meters of water column;
• the shutter consists of two chambers, and each has a shutter and an inspection hatch;
• the first damper located in the direction of movement of the drains is equipped with an electric drive (opening time does not exceed 11 seconds);
• the damper in the second chamber can be fixed in the closed position manually;
• there is a backup power supply (working time: up to 168 hours);
• shutter operation is controlled by an electronic control unit;
• data on the state of the shutter can be transferred to the dispatching console (there are "dry" contacts for this, switching current 220V / 0.5A);
• release type: smooth horizontal;
• mounted with socket pipes made of PP and PVC;
• power supply: 230V (+10%/-15%), 0.5A, 50Hz;
• cable length is 6 m.

Attention! The sewer closure must be installed in a non-explosive environment. Also, it cannot be installed in sewer shafts on the street.

Technical characteristics

Documentation

Download data sheet: Anti-flood valve HL 715.2EPC

Anti-flood valve with electronically controlled flap HL 712.2EPC has diameter of 110 mm, it is designed for installation in the basement. The valve separates the internal sewerage system from the main sewerage, and it is used for prevention of flooding. It is equipped with additional stainless steel flap, cleaning eye and manual blocking. Inlet has socket, outlet is smooth. The valve is powered by network voltage of 220 V. For pipes made of PP or PVC.

Download data sheet: Anti-flood valve HL 712.2EPC

Anti-flood valve with electronically controlled flap HL 710.2EPC has diameter of 110 mm, it is designed for installation in the basement. The valve separates the internal sewerage system from the main sewerage, and it is used for prevention of flooding. It is equipped with additional stainless steel flap, cleaning eye and manual blocking. Inlet has socket, outlet is smooth. The valve is powered by network voltage of 220 V. For pipes made of PP or PVC.

Download data sheet: Anti-flood valve HL 710.2EPC

Application purposes:

• For anti-flood valves

Material: Ni-MH

Weight: 0,318 kg

Application purposes:

• For anti-flood valve with electronically controlled flap

Weight: 0,33 kg

Application purposes:

• For anti-flood valves

Anti-flood valves of Hutterer and Lechner with electronically controlled flap works in automatic mode and practically does not require maintenance. It completely protects the room from possible flooding.

Application area:

• For anti flood valves

Weight: 2,19 kg

Application purposes:

• For motor driven

Weight: 0,47 kg

Application purposes:

• For anti-flood valves

Weight: 1,357 kg

Flap seal HL 603/1 is equipped with a mechanical device which is prevents foul air from rising up down pipes. The flap seal with diameter 110 mm weighs 940 grams. It is made of polypropylene. Capacity is 6 l/s.

Application area:

• For anti flood valves

Weight: 0,042 kg

Floor drain body HL 70K-3020 is equipped with flange, trap, backwater stop (automatically or manual), cleaning eye and 3 inlets DN40/50. It has horizontal outlet DN75/110. For series HL 3020. Comes with pre-installed lot cover.