Logo
Ru| En

Office: M. Baumanskaya

Warehouse: Lenin Hills

Fittings for domestic sewerage

Home→ Catalog→ Sewerage→ Domestic sewerage→ Pipeline systems→ Fittings for domestic sewerage

When installing internal sewage, special fittings are used that are connected to pipes:

  1. Elbows are fittings designed to connect pipes at an angle. Our catalog includes bends with an angle of inclination of 15°, 30°, 45°, 67°, 87°. All sewer outlets meet Russian and European requirements and are made of high quality materials.
  2. Tees - system elements used to change the angle of inclination and direction of water flow, to create an additional branch. Products with an outlet angle of 45°, 67°, 87° are produced.
  3. Crosses are used to create two branches (in some cases three) from the main pipeline.
  4. Revisions are a short pipe with a side branch with a tight-fitting lid. This element of the sewer system is used to clean the pipeline without dismantling.
  5. Reducers are used to connect sewer pipes with different diameters.
  6. Plugs on the smooth end of the pipe or on the socket are used to plug the dead end section of the pipeline.
  7. Siphons are mounted with sanitary equipment.
  8. Brackets allow you to rigidly fix the pipeline system.
  9. Flanges can be cast iron or plastic. Blind, transitional, connecting, prefabricated flanges, as well as flanges for passing through the roof are produced.
Photo Наименование Article Цена
Photo Draft
Photo RTP BETA ORANGE T-piece 45°, PP-B, for outdoor sewage, with socket, d - 110, d1 - 110 [Code number: 36512] Draft RTP BETA ORANGE T-piece 45°, PP-B, for outdoor sewage, with socket, d - 110, d1 - 110 [Code number: 36512]
RTP BETA ORANGE T-piece 45°, PP-B, for outdoor sewage, with socket, d - 110, d1 - 110 [Code number: 36512]
Details 		36512 (RTP) 326 rub
Photo
Photo RTP BETA ELITE T-piece 87°, MPP, white, d - 110, d1 - 50 [Code number: 36513 (RTP)]
RTP BETA ELITE T-piece 87°, MPP, white, d - 110, d1 - 50 [Code number: 36513 (RTP)]
Details 		36513 (RTP) 272 rub
Photo Draft
Photo Geberit HDPE Branch fitting 91.5° (88,5°), d75, d1 40 [Code number: 365.159.16.1] Draft Geberit HDPE Branch fitting 91.5° (88,5°), d75, d1 40 [Code number: 365.159.16.1]
Geberit HDPE Branch fitting 91.5° (88,5°), d75, d1 40 [Code number: 365.159.16.1]
Details 		365.159.16.1

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For all drainage pipes

Characteristics:

  • UV-resistant

Material: PE-HD

d d1 H X1 X2 X3 K1 K2 K3
mm mm cm cm cm cm cm cm cm
75 40 17.5 10.5 7 7 7.5 2.5 4
Photo Draft
Photo Geberit HDPE Branch fitting 91.5° (88,5°), d75, d1 50 [Code number: 365.162.16.1] Draft Geberit HDPE Branch fitting 91.5° (88,5°), d75, d1 50 [Code number: 365.162.16.1]
Geberit HDPE Branch fitting 91.5° (88,5°), d75, d1 50 [Code number: 365.162.16.1]
Details 		365.162.16.1

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For all drainage pipes

Characteristics:

  • UV-resistant

Material: PE-HD

d d1 H X1 X2 X3 K1 K2 K3
mm mm cm cm cm cm cm cm cm
75 50 17.5 10.5 7 7 7 2.5 3.5
Photo Draft
Photo Geberit HDPE Branch fitting 91.5° (88,5°), d75, d1 56 [Code number: 365.165.16.1] Draft Geberit HDPE Branch fitting 91.5° (88,5°), d75, d1 56 [Code number: 365.165.16.1]
Geberit HDPE Branch fitting 91.5° (88,5°), d75, d1 56 [Code number: 365.165.16.1]
Details 		365.165.16.1

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For all drainage pipes

Characteristics:

  • UV-resistant

Material: PE-HD

d d1 H X1 X2 X3 K1 K2 K3
mm mm cm cm cm cm cm cm cm
75 56 17.5 10.5 7 7 6.5 2.5 3
Photo Draft
Photo Geberit HDPE Branch fitting 91.5° (88,5°), d75, d1 63 [Code number: 365.170.16.1] Draft Geberit HDPE Branch fitting 91.5° (88,5°), d75, d1 63 [Code number: 365.170.16.1]
Geberit HDPE Branch fitting 91.5° (88,5°), d75, d1 63 [Code number: 365.170.16.1]
Details 		365.170.16.1

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For all drainage pipes

Characteristics:

  • UV-resistant

Material: PE-HD

d d1 H X1 X2 X3 K1 K2 K3
mm mm cm cm cm cm cm cm cm
75 63 17.5 10.5 7 7 6 2.5 2.5
Photo Draft
Photo Geberit HDPE Branch fitting 91.5° (88,5°), d75, d1 75 [Code number: 365.175.16.1] Draft Geberit HDPE Branch fitting 91.5° (88,5°), d75, d1 75 [Code number: 365.175.16.1]
Geberit HDPE Branch fitting 91.5° (88,5°), d75, d1 75 [Code number: 365.175.16.1]
Details 		365.175.16.1

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For all drainage pipes

Characteristics:

  • UV-resistant

Material: PE-HD

d d1 H X1 X2 X3 K1 K2 K3
mm mm cm cm cm cm cm cm cm
75 75 17.5 10.5 7 7 5.5 2.5 2.5
Photo
Photo RTP BETA ELITE T-piece 45°, MPP, white, d - 110, d1 - 50 [Code number: 36518 (RTP)]
RTP BETA ELITE T-piece 45°, MPP, white, d - 110, d1 - 50 [Code number: 36518 (RTP)]
Details 		36518 (RTP) 272 rub
Photo
Photo RTP BETA ELITE T-piece 87°, MPP, white, d - 110, d1 - 110 [Code number: 36523 (RTP)]
RTP BETA ELITE T-piece 87°, MPP, white, d - 110, d1 - 110 [Code number: 36523 (RTP)]
Details 		36523 (RTP) 359 rub
Photo
Photo RTP BETA ELITE T-piece 45°, MPP, white, d - 110, d1 - 110 [Code number: 36524 (RTP)]
RTP BETA ELITE T-piece 45°, MPP, white, d - 110, d1 - 110 [Code number: 36524 (RTP)]
Details 		36524 (RTP) 359 rub
Photo Draft
Photo RTP BETA Double branch 45°, for non-pressure domestic sewage, for socket, PP, d - 50, d1 - 50, d2 - 50 [Code number: 36525] Draft RTP BETA Double branch 45°, for non-pressure domestic sewage, for socket, PP, d - 50, d1 - 50, d2 - 50 [Code number: 36525]
RTP BETA Double branch 45°, for non-pressure domestic sewage, for socket, PP, d - 50, d1 - 50, d2 - 50 [Code number: 36525]
Details 		36525 (RTP) 216 rub
Photo
Photo RTP BETA T-piece 45° for non-pressure domestic sewage, with socket, PP, gray, d - 75, d1 - 50 [Code number: 36526]
RTP BETA T-piece 45° for non-pressure domestic sewage, with socket, PP, gray, d - 75, d1 - 50 [Code number: 36526]
Details 		36526 (RTP) 146 rub
Photo Draft
Photo Geberit HDPE Double branchball 88.5°, connections 180° offset, d75, d1 75 [Code number: 365.275.16.1] Draft Geberit HDPE Double branchball 88.5°, connections 180° offset, d75, d1 75 [Code number: 365.275.16.1]
Geberit HDPE Double branchball 88.5°, connections 180° offset, d75, d1 75 [Code number: 365.275.16.1]
Details 		365.275.16.1

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For all drainage pipes

Characteristics:

  • UV-resistant

Material: PE-HD

d d1 D H X1 X2 X3 K1 K2 K3
mm mm cm cm cm cm cm cm cm cm
75 75 12 16 8 10 8 1.5 3.5 1.5
Photo Draft
Photo RTP BETA Double branch 87°, for non-pressure domestic sewage, for socket, PP, d - 50, d1 - 50, d2 - 50 [Code number: 36527] Draft RTP BETA Double branch 87°, for non-pressure domestic sewage, for socket, PP, d - 50, d1 - 50, d2 - 50 [Code number: 36527]
RTP BETA Double branch 87°, for non-pressure domestic sewage, for socket, PP, d - 50, d1 - 50, d2 - 50 [Code number: 36527]
Details 		36527 (RTP) 216 rub
Photo Draft
Photo RTP BETA T-piece 45° for non-pressure domestic sewage, for socket, PP, d - 75, d1 - 75 [Code number: 36529] Draft RTP BETA T-piece 45° for non-pressure domestic sewage, for socket, PP, d - 75, d1 - 75 [Code number: 36529]
RTP BETA T-piece 45° for non-pressure domestic sewage, for socket, PP, d - 75, d1 - 75 [Code number: 36529]
Details 		36529 (RTP) 177 rub
Photo
Photo RTP BETA T-piece 90° three-socket, for non-pressure domestic sewage, for socket, PP, d - 50, d1 - 50 [Code number: 36530]
RTP BETA T-piece 90° three-socket, for non-pressure domestic sewage, for socket, PP, d - 50, d1 - 50 [Code number: 36530]
Details 		36530 (RTP) 305 rub
Photo Draft
Photo RTP BETA T-piece 87° for non-pressure domestic sewage, for socket, PP, d - 50, d1 - 50 [Code number: 36531] Draft RTP BETA T-piece 87° for non-pressure domestic sewage, for socket, PP, d - 50, d1 - 50 [Code number: 36531]
RTP BETA T-piece 87° for non-pressure domestic sewage, for socket, PP, d - 50, d1 - 50 [Code number: 36531]
Details 		36531 (RTP) 99 rub
Photo Draft
Photo Geberit HDPE Double branchball 88.5°, connections 90° offset, d75, d1 75 [Code number: 365.325.16.1] Draft Geberit HDPE Double branchball 88.5°, connections 90° offset, d75, d1 75 [Code number: 365.325.16.1]
Geberit HDPE Double branchball 88.5°, connections 90° offset, d75, d1 75 [Code number: 365.325.16.1]
Details 		365.325.16.1

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For building drainage

Characteristics:

  • UV-resistant

Material: PE-HD

d d1 D H X1 X2 X3 K1 K2 K3
mm mm cm cm cm cm cm cm cm cm
75 75 12 16 8 10 8 1.5 3.5 1.5
Photo
Photo RTP BETA Corner branch 45°, for non-pressure domestic sewage, for socket, PP, d - 110, d1 - 110, d2 - 50, d3 - 50 (л+п) [Code number: 36532]
RTP BETA Corner branch 45°, for non-pressure domestic sewage, for socket, PP, d - 110, d1 - 110, d2 - 50, d3 - 50 (л+п) [Code number: 36532]
Details 		36532 (RTP) 659 rub
Photo
Photo RTP BETA Corner branch 45°, for non-pressure domestic sewage, for socket, PP, d - 110, d1 - 110, d2 - 50, d3 - 50 (л+т) [Code number: 36533]
RTP BETA Corner branch 45°, for non-pressure domestic sewage, for socket, PP, d - 110, d1 - 110, d2 - 50, d3 - 50 (л+т) [Code number: 36533]
Details 		36533 (RTP) 659 rub
© Inrusstrade.ru 1999-2026. "Inrusstrade" Ltd. Copying and quoting is prohibited