Logo
Ru| En

Fittings for domestic sewerage

Home→ Catalog→ Sewerage→ Domestic sewerage→ Pipeline systems→ Fittings for domestic sewerage

When installing internal sewage, special fittings are used that are connected to pipes:

  1. Elbows are fittings designed to connect pipes at an angle. Our catalog includes bends with an angle of inclination of 15°, 30°, 45°, 67°, 87°. All sewer outlets meet Russian and European requirements and are made of high quality materials.
  2. Tees - system elements used to change the angle of inclination and direction of water flow, to create an additional branch. Products with an outlet angle of 45°, 67°, 87° are produced.
  3. Crosses are used to create two branches (in some cases three) from the main pipeline.
  4. Revisions are a short pipe with a side branch with a tight-fitting lid. This element of the sewer system is used to clean the pipeline without dismantling.
  5. Reducers are used to connect sewer pipes with different diameters.
  6. Plugs on the smooth end of the pipe or on the socket are used to plug the dead end section of the pipeline.
  7. Siphons are mounted with sanitary equipment.
  8. Brackets allow you to rigidly fix the pipeline system.
  9. Flanges can be cast iron or plastic. Blind, transitional, connecting, prefabricated flanges, as well as flanges for passing through the roof are produced.
Photo Name Article Price
Photo Draft
Photo Geberit HDPE Bend 45°, d75 [Code number: 365.045.16.1] Draft Geberit HDPE Bend 45°, d75 [Code number: 365.045.16.1]
Geberit HDPE Bend 45°, d75 [Code number: 365.045.16.1]
Details 		365.045.16.1

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For building drainage

Characteristics:

  • UV-resistant
  • Can be welded on both sides with electrofusion coupling

Technical data

Material: PE-HD

d X K
mm cm cm
75 5 2
Photo Draft
Photo Geberit HDPE Bend 45° with large leg, d75 [Code number: 365.046.16.1] Draft Geberit HDPE Bend 45° with large leg, d75 [Code number: 365.046.16.1]
Geberit HDPE Bend 45° with large leg, d75 [Code number: 365.046.16.1]
Details 		365.046.16.1

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For building drainage

Characteristics:

  • UV-resistant
  • Can be welded on both sides with electrofusion coupling
  • Wide radius

Technical data

Material: PE-HD

d X1 X2 K1 K2
mm cm cm cm cm
40 4 2 4 2
Photo Draft
Photo RTP BETA T-piece 87° for non-pressure domestic sewage, for socket, PP, d - 75, d1 - 50 [Code number: 36505] Draft RTP BETA T-piece 87° for non-pressure domestic sewage, for socket, PP, d - 75, d1 - 50 [Code number: 36505]
RTP BETA T-piece 87° for non-pressure domestic sewage, for socket, PP, d - 75, d1 - 50 [Code number: 36505]
Details 		36505 137 rub
Photo Draft
Photo Geberit HDPE Bend 90° with large leg, d75 [Code number: 365.055.16.1] Draft Geberit HDPE Bend 90° with large leg, d75 [Code number: 365.055.16.1]
Geberit HDPE Bend 90° with large leg, d75 [Code number: 365.055.16.1]
Details 		365.055.16.1

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For building drainage

Characteristics:

  • UV-resistant
  • Wide radius

Technical data

Material: PE-HD

d X1 X2 K1 r
mm cm cm cm cm
75 21 7 14 7
Photo Draft
Photo RTP BETA ORANGE T-piece 87°, PP-B, for outdoor sewage, with socket, d - 160, d1 - 160 [Code number: 36506] Draft RTP BETA ORANGE T-piece 87°, PP-B, for outdoor sewage, with socket, d - 160, d1 - 160 [Code number: 36506]
RTP BETA ORANGE T-piece 87°, PP-B, for outdoor sewage, with socket, d - 160, d1 - 160 [Code number: 36506]
Details 		36506 1 170 rub
Photo Draft
Photo RTP BETA ORANGE T-piece 45°, PP-B, for outdoor sewage, with socket, d - 160, d1 - 160 [Code number: 36507] Draft RTP BETA ORANGE T-piece 45°, PP-B, for outdoor sewage, with socket, d - 160, d1 - 160 [Code number: 36507]
RTP BETA ORANGE T-piece 45°, PP-B, for outdoor sewage, with socket, d - 160, d1 - 160 [Code number: 36507]
Details 		36507 1 170 rub
Photo Draft
Photo Geberit HDPE Bend 88.5°, d75 [Code number: 365.088.16.1] Draft Geberit HDPE Bend 88.5°, d75 [Code number: 365.088.16.1]
Geberit HDPE Bend 88.5°, d75 [Code number: 365.088.16.1]
Details 		365.088.16.1

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For building drainage

Characteristics:

  • UV-resistant

Technical data

Material: PE-HD

d X K
mm cm cm
75 7.5 2
Photo Draft
Photo RTP BETA ORANGE T-piece 87°, PP-B, for outdoor sewage, with socket, d - 160, d1 - 110 [Code number: 36509] Draft RTP BETA ORANGE T-piece 87°, PP-B, for outdoor sewage, with socket, d - 160, d1 - 110 [Code number: 36509]
RTP BETA ORANGE T-piece 87°, PP-B, for outdoor sewage, with socket, d - 160, d1 - 110 [Code number: 36509]
Details 		36509 1 004 rub
Photo Draft
Photo RTP BETA ORANGE T-piece 45°, PP-B, for outdoor sewage, with socket, d - 160, d1 - 110 [Code number: 36510] Draft RTP BETA ORANGE T-piece 45°, PP-B, for outdoor sewage, with socket, d - 160, d1 - 110 [Code number: 36510]
RTP BETA ORANGE T-piece 45°, PP-B, for outdoor sewage, with socket, d - 160, d1 - 110 [Code number: 36510]
Details 		36510 1 004 rub
Photo Draft
Photo Geberit HDPE Y-branch fitting 135° (45°), d75, d1 40 [Code number: 365.109.16.1] Draft Geberit HDPE Y-branch fitting 135° (45°), d75, d1 40 [Code number: 365.109.16.1]
Geberit HDPE Y-branch fitting 135° (45°), d75, d1 40 [Code number: 365.109.16.1]
Details 		365.109.16.1

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For building drainage

Characteristics:

  • UV-resistant

Material: PE-HD

d d1 H X1 X2 X3 K1 K2 K3
mm mm cm cm cm cm cm cm cm
75 40 21 7 14 14 6.5 5 6
Photo Draft
Photo RTP BETA ORANGE T-piece 87° single-plane, PP-B, for outdoor sewerage, with socket, d - 110, d1 - 110 [Code number: 36511 (RTP)] Draft RTP BETA ORANGE T-piece 87° single-plane, PP-B, for outdoor sewerage, with socket, d - 110, d1 - 110 [Code number: 36511 (RTP)]
RTP BETA ORANGE T-piece 87° single-plane, PP-B, for outdoor sewerage, with socket, d - 110, d1 - 110 [Code number: 36511 (RTP)]
Details 		36511 306 rub
Photo Draft
Photo Geberit HDPE Y-branch fitting 135° (45°), d75, d1 50 [Code number: 365.112.16.1] Draft Geberit HDPE Y-branch fitting 135° (45°), d75, d1 50 [Code number: 365.112.16.1]
Geberit HDPE Y-branch fitting 135° (45°), d75, d1 50 [Code number: 365.112.16.1]
Details 		365.112.16.1

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For building drainage

Characteristics:

  • UV-resistant

Material: PE-HD

d d1 H X1 X2 X3 K1 K2 K3
mm mm cm cm cm cm cm cm cm
75 50 21 7 14 14 6 3 4
Photo Draft
Photo Geberit HDPE Y-branch fitting 135° (45°), d75, d1 56 [Code number: 365.115.16.1] Draft Geberit HDPE Y-branch fitting 135° (45°), d75, d1 56 [Code number: 365.115.16.1]
Geberit HDPE Y-branch fitting 135° (45°), d75, d1 56 [Code number: 365.115.16.1]
Details 		365.115.16.1

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For building drainage

Characteristics:

  • UV-resistant

Material: PE-HD

d d1 H X1 X2 X3 K1 K2 K3
mm mm cm cm cm cm cm cm cm
75 56 21 7 14 14 5.5 2.5 3.5
Photo Draft
Photo RTP BETA ORANGE T-piece 45°, PP-B, for outdoor sewage, with socket, d - 110, d1 - 110 [Code number: 36512] Draft RTP BETA ORANGE T-piece 45°, PP-B, for outdoor sewage, with socket, d - 110, d1 - 110 [Code number: 36512]
RTP BETA ORANGE T-piece 45°, PP-B, for outdoor sewage, with socket, d - 110, d1 - 110 [Code number: 36512]
Details 		36512 306 rub
Photo Draft
Photo Geberit HDPE Y-branch fitting 135° (45°), d75, d1 63 [Code number: 365.120.16.1] Draft Geberit HDPE Y-branch fitting 135° (45°), d75, d1 63 [Code number: 365.120.16.1]
Geberit HDPE Y-branch fitting 135° (45°), d75, d1 63 [Code number: 365.120.16.1]
Details 		365.120.16.1

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For building drainage

Characteristics:

  • UV-resistant

Material: PE-HD

d d1 H X1 X2 X3 K1 K2 K3
mm mm cm cm cm cm cm cm cm
75 63 21 7 14 14 4.5 2.5 3.5
Photo Draft
Photo Geberit HDPE Y-branch fitting 135° (45°), d75, d1 75 [Code number: 365.125.16.1] Draft Geberit HDPE Y-branch fitting 135° (45°), d75, d1 75 [Code number: 365.125.16.1]
Geberit HDPE Y-branch fitting 135° (45°), d75, d1 75 [Code number: 365.125.16.1]
Details 		365.125.16.1

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For building drainage

Characteristics:

  • UV-resistant

Material: PE-HD

d d1 H X1 X2 X3 K1 K2 K3
mm mm cm cm cm cm cm cm cm
75 75 21 7 14 14 4 2.5 2.5
Photo
Photo RTP BETA ELITE T-piece 87°, MPP, white, d - 110, d1 - 50 [Code number: 36513 (RTP)]
RTP BETA ELITE T-piece 87°, MPP, white, d - 110, d1 - 50 [Code number: 36513 (RTP)]
Details 		36513 254 rub
Photo Draft
Photo Geberit HDPE Branch fitting 91.5° (88,5°), d75, d1 40 [Code number: 365.159.16.1] Draft Geberit HDPE Branch fitting 91.5° (88,5°), d75, d1 40 [Code number: 365.159.16.1]
Geberit HDPE Branch fitting 91.5° (88,5°), d75, d1 40 [Code number: 365.159.16.1]
Details 		365.159.16.1

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For all drainage pipes

Characteristics:

  • UV-resistant

Material: PE-HD

d d1 H X1 X2 X3 K1 K2 K3
mm mm cm cm cm cm cm cm cm
75 40 17.5 10.5 7 7 7.5 2.5 4
Photo Draft
Photo Geberit HDPE Branch fitting 91.5° (88,5°), d75, d1 50 [Code number: 365.162.16.1] Draft Geberit HDPE Branch fitting 91.5° (88,5°), d75, d1 50 [Code number: 365.162.16.1]
Geberit HDPE Branch fitting 91.5° (88,5°), d75, d1 50 [Code number: 365.162.16.1]
Details 		365.162.16.1

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For all drainage pipes

Characteristics:

  • UV-resistant

Material: PE-HD

d d1 H X1 X2 X3 K1 K2 K3
mm mm cm cm cm cm cm cm cm
75 50 17.5 10.5 7 7 7 2.5 3.5
Photo Draft
Photo Geberit HDPE Branch fitting 91.5° (88,5°), d75, d1 56 [Code number: 365.165.16.1] Draft Geberit HDPE Branch fitting 91.5° (88,5°), d75, d1 56 [Code number: 365.165.16.1]
Geberit HDPE Branch fitting 91.5° (88,5°), d75, d1 56 [Code number: 365.165.16.1]
Details 		365.165.16.1

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For all drainage pipes

Characteristics:

  • UV-resistant

Material: PE-HD

d d1 H X1 X2 X3 K1 K2 K3
mm mm cm cm cm cm cm cm cm
75 56 17.5 10.5 7 7 6.5 2.5 3

© Inrusstrade.ru 1999-2024. "Inrusstrade" Ltd. Copying and quoting is prohibited