Logo
Ru| En

Fittings for domestic sewerage

Home→ Catalog→ Sewerage→ Domestic sewerage→ Pipeline systems→ Fittings for domestic sewerage

When installing internal sewage, special fittings are used that are connected to pipes:

  1. Elbows are fittings designed to connect pipes at an angle. Our catalog includes bends with an angle of inclination of 15°, 30°, 45°, 67°, 87°. All sewer outlets meet Russian and European requirements and are made of high quality materials.
  2. Tees - system elements used to change the angle of inclination and direction of water flow, to create an additional branch. Products with an outlet angle of 45°, 67°, 87° are produced.
  3. Crosses are used to create two branches (in some cases three) from the main pipeline.
  4. Revisions are a short pipe with a side branch with a tight-fitting lid. This element of the sewer system is used to clean the pipeline without dismantling.
  5. Reducers are used to connect sewer pipes with different diameters.
  6. Plugs on the smooth end of the pipe or on the socket are used to plug the dead end section of the pipeline.
  7. Siphons are mounted with sanitary equipment.
  8. Brackets allow you to rigidly fix the pipeline system.
  9. Flanges can be cast iron or plastic. Blind, transitional, connecting, prefabricated flanges, as well as flanges for passing through the roof are produced.
Photo Name Article Price
Photo Draft
Photo Geberit HDPE Adaptor clamping connector, d125, d1 140-141 [Code number: 359.445.00.2] Draft Geberit HDPE Adaptor clamping connector, d125, d1 140-141 [Code number: 359.445.00.2]
Geberit HDPE Adaptor clamping connector, d125, d1 140-141 [Code number: 359.445.00.2]
Details 		359.445.00.2

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For building drainage
  • For connecting pipes and fittings made of the same or different product materials

Characteristics:

  • With seal made of EPDM

Material: Stainless steel

d d1 D H E X
mm mm cm cm cm cm
125 140-141 15.6 6.9 3.3 0.3
Photo Draft
Photo Geberit HDPE Adaptor clamping connector, d135, d1 135 [Code number: 359.446.00.2] Draft Geberit HDPE Adaptor clamping connector, d135, d1 135 [Code number: 359.446.00.2]
Geberit HDPE Adaptor clamping connector, d135, d1 135 [Code number: 359.446.00.2]
Details 		359.446.00.2

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For building drainage
  • For connecting pipes and fittings made of the same or different product materials

Characteristics:

  • With seal made of EPDM

Material: Stainless steel

d d1 D H E X
mm mm cm cm cm cm
135 135 15 6.9 3.3 0.3
Photo Draft
Photo Geberit HDPE Adaptor clamping connector, d140-141 [Code number: 359.447.00.2] Draft Geberit HDPE Adaptor clamping connector, d140-141 [Code number: 359.447.00.2]
Geberit HDPE Adaptor clamping connector, d140-141 [Code number: 359.447.00.2]
Details 		359.447.00.2

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For building drainage
  • For connecting pipes and fittings made of the same or different product materials

Characteristics:

  • With seal made of EPDM

Material: Stainless steel

d d1 D H E X
mm mm cm cm cm cm
140-141 140-141 15.5 6.9 3.3 0.3
Photo Draft
Photo Geberit HDPE Adaptor clamping connector, d 159-160, d1 152 [Code number: 359.448.00.2] Draft Geberit HDPE Adaptor clamping connector, d 159-160, d1 152 [Code number: 359.448.00.2]
Geberit HDPE Adaptor clamping connector, d 159-160, d1 152 [Code number: 359.448.00.2]
Details 		359.448.00.2

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For building drainage
  • For connecting pipes and fittings made of the same or different product materials

Characteristics:

  • With seal made of EPDM

Material: Stainless steel

d d1 D H E X
mm mm cm cm cm cm
159-160 152 17.5 6.9 3.3 0.3
Photo Draft
Photo Geberit HDPE Adaptor clamping connector, d 159-160, d1 159-160 [Code number: 359.449.00.2] Draft Geberit HDPE Adaptor clamping connector, d 159-160, d1 159-160 [Code number: 359.449.00.2]
Geberit HDPE Adaptor clamping connector, d 159-160, d1 159-160 [Code number: 359.449.00.2]
Details 		359.449.00.2

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For building drainage
  • For connecting pipes and fittings made of the same or different product materials

Characteristics:

  • With seal made of EPDM

Material: Stainless steel

d d1 D H E X
mm mm cm cm cm cm
159-160 159-160 17.5 6.9 3.3 0.3
Photo Draft
Photo Geberit HDPE Adaptor clamping connector, d 159-160, d1 168 [Code number: 359.450.00.2] Draft Geberit HDPE Adaptor clamping connector, d 159-160, d1 168 [Code number: 359.450.00.2]
Geberit HDPE Adaptor clamping connector, d 159-160, d1 168 [Code number: 359.450.00.2]
Details 		359.450.00.2

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For building drainage
  • For connecting pipes and fittings made of the same or different product materials

Characteristics:

  • With seal made of EPDM

Material: Stainless steel

d d1 D H E X
mm mm cm cm cm cm
159-160 168 18.3 6.9 3.3 0.3
Photo Draft
Photo Geberit HDPE Adaptor clamping connector, d210 [Code number: 359.451.00.2] Draft Geberit HDPE Adaptor clamping connector, d210 [Code number: 359.451.00.2]
Geberit HDPE Adaptor clamping connector, d210 [Code number: 359.451.00.2]
Details 		359.451.00.2

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For building drainage
  • For connecting pipes and fittings made of the same or different product materials

Characteristics:

  • With seal made of EPDM

Material: Stainless steel

d d1 D H E X
mm mm cm cm cm cm
210 210 22.5 6.9 3.3 0.3
Photo Draft
Photo Geberit HDPE Straight adapter to PVC, d110/99.6 [Code number: 359.461.16.1] Draft Geberit HDPE Straight adapter to PVC, d110/99.6 [Code number: 359.461.16.1]
Geberit HDPE Straight adapter to PVC, d110/99.6 [Code number: 359.461.16.1]
Details 		359.461.16.1

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For building drainage
  • For transitions from Geberit HDPE to PVC with with an inner diameter of 100–101 mm

Characteristics:

  • UV-resistant

Material: PE-HD

d d1
mm mm
110 99
Photo Draft
Photo Geberit HDPE Bend 45°, d40 [Code number: 360.045.16.1] Draft Geberit HDPE Bend 45°, d40 [Code number: 360.045.16.1]
Geberit HDPE Bend 45°, d40 [Code number: 360.045.16.1]
Details 		360.045.16.1

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For building drainage

Characteristics:

  • UV-resistant
  • Can be welded on both sides with electrofusion coupling

Technical data

Material: PE-HD

d X K
mm cm cm
40 4 2
Photo Draft
Photo Geberit HDPE Bend 90° with large leg, d40 [Code number: 360.055.16.1] Draft Geberit HDPE Bend 90° with large leg, d40 [Code number: 360.055.16.1]
Geberit HDPE Bend 90° with large leg, d40 [Code number: 360.055.16.1]
Details 		360.055.16.1

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For building drainage

Characteristics:

  • UV-resistant
  • Wide radius

Technical data

Material: PE-HD

d X1 X2 K1 r
mm cm cm cm cm
40 15 3 12 3
Photo Draft
Photo Geberit HDPE Y-branch fitting 135° (45°), d40, d1 32 [Code number: 360.108.16.1] Draft Geberit HDPE Y-branch fitting 135° (45°), d40, d1 32 [Code number: 360.108.16.1]
Geberit HDPE Y-branch fitting 135° (45°), d40, d1 32 [Code number: 360.108.16.1]
Details 		360.108.16.1

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For building drainage

Characteristics:

  • UV-resistant

Material: PE-HD

d d1 H X1 X2 X3 K1 K2 K3
mm mm cm cm cm cm cm cm cm
40 32 13.5 4.5 9 9 3 3.5 3.5
Photo Draft
Photo Geberit HDPE Y-branch fitting 135° (45°), d40, d1 40 [Code number: 360.109.16.1] Draft Geberit HDPE Y-branch fitting 135° (45°), d40, d1 40 [Code number: 360.109.16.1]
Geberit HDPE Y-branch fitting 135° (45°), d40, d1 40 [Code number: 360.109.16.1]
Details 		360.109.16.1

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For building drainage

Characteristics:

  • UV-resistant

Material: PE-HD

d d1 H X1 X2 X3 K1 K2 K3
mm mm cm cm cm cm cm cm cm
40 40 13.5 4.5 9 9 2.5 3 3
Photo Draft
Photo Geberit HDPE Branch fitting 91.5° (88,5°), d40, d1 32 [Code number: 360.158.16.1] Draft Geberit HDPE Branch fitting 91.5° (88,5°), d40, d1 32 [Code number: 360.158.16.1]
Geberit HDPE Branch fitting 91.5° (88,5°), d40, d1 32 [Code number: 360.158.16.1]
Details 		360.158.16.1

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For all drainage pipes

Characteristics:

  • UV-resistant

Material: PE-HD

d d1 H X1 X2 X3 K1 K2 K3
mm mm cm cm cm cm cm cm cm
40 32 13 7.5 5.5 5.5 5 2.5 2
Photo Draft
Photo Geberit HDPE Branch fitting 91.5° (88,5°), d40, d1 40 [Code number: 360.159.16.1] Draft Geberit HDPE Branch fitting 91.5° (88,5°), d40, d1 40 [Code number: 360.159.16.1]
Geberit HDPE Branch fitting 91.5° (88,5°), d40, d1 40 [Code number: 360.159.16.1]
Details 		360.159.16.1

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For all drainage pipes

Characteristics:

  • UV-resistant

Material: PE-HD

d d1 H X1 X2 X3 K1 K2 K3
mm mm cm cm cm cm cm cm cm
40 40 13 7.5 5.5 5.5 4.5 2.5 2.5
Photo Draft
Photo Geberit HDPE Concentric reducer, d40, d1 32 [Code number: 360.557.16.1] Draft Geberit HDPE Concentric reducer, d40, d1 32 [Code number: 360.557.16.1]
Geberit HDPE Concentric reducer, d40, d1 32 [Code number: 360.557.16.1]
Details 		360.557.16.1

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For all drainage pipes

Characteristics:

  • UV-resistant

Material: PE-HD

d d1 H h K
mm mm cm cm cm
40 32 8 3 1.5
Photo Draft
Photo Geberit HDPE Adapter with female thread, d40, Rp1/2" [Code number: 360.719.16.1] Draft Geberit HDPE Adapter with female thread, d40, Rp1/2" [Code number: 360.719.16.1]
Geberit HDPE Adapter with female thread, d40, Rp1/2" [Code number: 360.719.16.1]
Details 		360.719.16.1

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For building drainage

Characteristics:

  • UV-resistant
  • With support ring made of chrome nickel steel

Material: PE-HD

d Rp H
mm " cm
40 1/2 5.5
Photo Draft
Photo Geberit HDPE Adapter with female thread, d40, Rp3/4" [Code number: 360.720.16.1] Draft Geberit HDPE Adapter with female thread, d40, Rp3/4" [Code number: 360.720.16.1]
Geberit HDPE Adapter with female thread, d40, Rp3/4" [Code number: 360.720.16.1]
Details 		360.720.16.1

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For building drainage

Characteristics:

  • UV-resistant
  • With support ring made of chrome nickel steel

Material: PE-HD

d Rp H
mm " cm
40 3/4 5.5
Photo Draft
Photo Geberit HDPE Adapter with female thread, d40, Rp1" [Code number: 360.721.16.1] Draft Geberit HDPE Adapter with female thread, d40, Rp1" [Code number: 360.721.16.1]
Geberit HDPE Adapter with female thread, d40, Rp1" [Code number: 360.721.16.1]
Details 		360.721.16.1

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For building drainage

Characteristics:

  • UV-resistant
  • With support ring made of chrome nickel steel

Material: PE-HD

d Rp H
mm " cm
40 1 5.5
Photo Draft
Photo Geberit HDPE Complete Screw-Threaded Joint, d40 [Code number: 360.740.16.1] Draft Geberit HDPE Complete Screw-Threaded Joint, d40 [Code number: 360.740.16.1]
Geberit HDPE Complete Screw-Threaded Joint, d40 [Code number: 360.740.16.1]
Details 		360.740.16.1

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For building drainage

Characteristics:

  • UV-resistant
  • Seal made of EPDM
  • Compression ring made of PP
  • Union nut made of PP

Scope of delivery:

  • Protective cap

Material: PE-HD

d Rg D H h h1 h2
mm " cm cm cm cm cm
40 52 x 1/6 6.4 6.3 3.3 5 2
Photo Draft
Photo Geberit HDPE Threaded connector with screw cap, d40 [Code number: 360.750.16.1] Draft Geberit HDPE Threaded connector with screw cap, d40 [Code number: 360.750.16.1]
Geberit HDPE Threaded connector with screw cap, d40 [Code number: 360.750.16.1]
Details 		360.750.16.1

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For building drainage

Characteristics:

  • UV-resistant
  • With seal made of EPDM
  • Screw cap made of PP

Material: PE-HD

d Rg D H h h1 h2
mm " cm cm cm cm cm
40 52 x 1/6 6.4 6.3 3.3 5 2

© Inrusstrade.ru 1999-2024. "Inrusstrade" Ltd. Copying and quoting is prohibited