Fittings for domestic sewerage

Watch products by Brands

When installing internal sewage, special fittings are used that are connected to pipes:

Elbows are fittings designed to connect pipes at an angle. Our catalog includes bends with an angle of inclination of 15°, 30°, 45°, 67°, 87°. All sewer outlets meet Russian and European requirements and are made of high quality materials.
Tees - system elements used to change the angle of inclination and direction of water flow, to create an additional branch. Products with an outlet angle of 45°, 67°, 87° are produced.
Crosses are used to create two branches (in some cases three) from the main pipeline.
Revisions are a short pipe with a side branch with a tight-fitting lid. This element of the sewer system is used to clean the pipeline without dismantling.
Reducers are used to connect sewer pipes with different diameters.
Plugs on the smooth end of the pipe or on the socket are used to plug the dead end section of the pipeline.
Siphons are mounted with sanitary equipment.
Brackets allow you to rigidly fix the pipeline system.
Flanges can be cast iron or plastic. Blind, transitional, connecting, prefabricated flanges, as well as flanges for passing through the roof are produced.

Photo Наименование Article Цена

Chemkor Internal sewerage Bend 87°, socket connection, uPVC, d - 110 [Code number: 2391030]

Details

2391030

330 rub

Purpose of application:

For draining water/household waste into the sewer system
For residential, public and industrial buildings
For exhaust pipes
For the removal of rain and melt water (the number of storeys of buildings should not exceed 4 floors, the pressure of the water column - up to 1.5 atmospheres)

Characteristics:

High resistance to UV radiation - under the influence of ultraviolet, the physical and mechanical properties of the material do not change;
Resistance to microorganisms, fungi and bacteria;
Fast installation;
Connection type: socket;
Ring stiffness: SN8;
High resistance to alkalis, acids and surfactants;
The temperature of the discharged liquids can vary from the freezing point of the effluents themselves to +60 °С (a short-term increase to +95 °С is possible);
The ignition temperature is +482 ° C - it does not melt, it is almost non-toxic, it does not form burning drops, it practically does not emit smoke;
Refers to the flammability class G1 (GOST 30244-94);
Warranty period: 2 years from the date of manufacture (if the rules of transportation and storage are observed);
Service life: about 100 years.

It is painted grey.

Technical characteristics

Dn	Angle	Z1	Z2	Weight
mm		mm	mm	kg
110	87°	60	66	0,37

Documentation

Download: Chemical resistance

Download: Methodological recommendations for project design

Chemkor Internal sewerage Reducer, socket connection, uPVC, d - 110, d1 - 50 [Code number: 2391035]

Details

2391035

194 rub

Purpose of application:

For draining water/household waste into the sewer system
For residential, public and industrial buildings
For exhaust pipes
For the removal of rain and melt water (the number of storeys of buildings should not exceed 4 floors, the pressure of the water column - up to 1.5 atmospheres)

Characteristics:

High resistance to UV radiation - under the influence of ultraviolet, the physical and mechanical properties of the material do not change;
Resistance to microorganisms, fungi and bacteria;
Fast installation;
Connection type: socket;
Ring stiffness: SN8;
High resistance to alkalis, acids and surfactants;
The temperature of the discharged liquids can vary from the freezing point of the effluents themselves to +60 °С (a short-term increase to +95 °С is possible);
The ignition temperature is +482 ° C - it does not melt, it is almost non-toxic, it does not form burning drops, it practically does not emit smoke;
Refers to the flammability class G1 (GOST 30244-94);
Warranty period: 2 years from the date of manufacture (if the rules of transportation and storage are observed);
Service life: about 100 years.

It is painted grey.

Technical characteristics

Dn	L	Z1	Weight
mm	mm	mm	kg
110x50	142,5	43	0,21

Documentation

Download: Chemical resistance

Download: Methodological recommendations for project design

Chemkor Shumeks Bend 45°, socket connection, uPVC, d - 110 [Code number: 2391056]

Details

2391056

263 rub

Purpose of application:

For draining water/household waste into the sewer system
For residential, public and industrial buildings
For exhaust pipes
For the removal of rain and melt water (the number of storeys of buildings should not exceed 4 floors, the pressure of the water column - up to 1.5 atmospheres)

Characteristics:

Resistance to microorganisms, fungi and bacteria;
Fast installation;
Connection type: socket;
Ring stiffness: SN8;
High sound absorption - noise level 5-11 dB (flow rate 0.5-2 l/s);
High resistance to alkalis, acids and surfactants;
The temperature of the discharged liquids can vary from the freezing point of the effluents themselves to +60 °С (a short-term increase to +95 °С is possible);
The ignition temperature is +482 ° C - it does not melt, it is almost non-toxic, it does not form burning drops, it practically does not emit smoke;
Warranty period: 2 years from the date of manufacture (if the rules of transportation and storage are observed);
Service life: at least 50 years.

It is painted white.

Technical characteristics

DN	α	Z1	Z2
mm		mm	mm
110	45°	83	85

Documentation

Download: Chemical resistance

Download: Methodological recommendations for project design

Chemkor Shumeks Bend 87°, socket connection, uPVC, d - 110 [Code number: 2391057]

Details

2391057

335 rub

Purpose of application:

For draining water/household waste into the sewer system
For residential, public and industrial buildings
For exhaust pipes
For the removal of rain and melt water (the number of storeys of buildings should not exceed 4 floors, the pressure of the water column - up to 1.5 atmospheres)

Characteristics:

Resistance to microorganisms, fungi and bacteria;
Fast installation;
Connection type: socket;
Ring stiffness: SN8;
High sound absorption - noise level 5-11 dB (flow rate 0.5-2 l/s);
High resistance to alkalis, acids and surfactants;
The temperature of the discharged liquids can vary from the freezing point of the effluents themselves to +60 °С (a short-term increase to +95 °С is possible);
The ignition temperature is +482 ° C - it does not melt, it is almost non-toxic, it does not form burning drops, it practically does not emit smoke;
Warranty period: 2 years from the date of manufacture (if the rules of transportation and storage are observed);
Service life: at least 50 years.

It is painted white.

Technical characteristics

DN	α	Z1	Z2
mm		mm	mm
110	87°	114	116

Documentation

Download: Chemical resistance

Download: Methodological recommendations for project design

Chemkor Shumeks Bend 45°, socket connection, uPVC, d - 50 [Code number: 2391058]

Details

2391058

80 rub

Purpose of application:

For draining water/household waste into the sewer system
For residential, public and industrial buildings
For exhaust pipes
For the removal of rain and melt water (the number of storeys of buildings should not exceed 4 floors, the pressure of the water column - up to 1.5 atmospheres)

Characteristics:

Resistance to microorganisms, fungi and bacteria;
Fast installation;
Connection type: socket;
Ring stiffness: SN8;
High sound absorption - noise level 5-11 dB (flow rate 0.5-2 l/s);
High resistance to alkalis, acids and surfactants;
The temperature of the discharged liquids can vary from the freezing point of the effluents themselves to +60 °С (a short-term increase to +95 °С is possible);
The ignition temperature is +482 ° C - it does not melt, it is almost non-toxic, it does not form burning drops, it practically does not emit smoke;
Warranty period: 2 years from the date of manufacture (if the rules of transportation and storage are observed);
Service life: at least 50 years.

It is painted white.

Technical characteristics

DN	α	Z1	Z2
mm		mm	mm
50	45°	57	57

Documentation

Download: Chemical resistance

Download: Methodological recommendations for project design

Chemkor Shumeks Bend 87°, socket connection, uPVC, d - 50 [Code number: 2391059]

Details

2391059

93 rub

Purpose of application:

For draining water/household waste into the sewer system
For residential, public and industrial buildings
For exhaust pipes
For the removal of rain and melt water (the number of storeys of buildings should not exceed 4 floors, the pressure of the water column - up to 1.5 atmospheres)

Characteristics:

Resistance to microorganisms, fungi and bacteria;
Fast installation;
Connection type: socket;
Ring stiffness: SN8;
High sound absorption - noise level 5-11 dB (flow rate 0.5-2 l/s);
High resistance to alkalis, acids and surfactants;
The temperature of the discharged liquids can vary from the freezing point of the effluents themselves to +60 °С (a short-term increase to +95 °С is possible);
The ignition temperature is +482 ° C - it does not melt, it is almost non-toxic, it does not form burning drops, it practically does not emit smoke;
Warranty period: 2 years from the date of manufacture (if the rules of transportation and storage are observed);
Service life: at least 50 years.

It is painted white.

Technical characteristics

DN	α	Z1	Z2
mm		mm	mm
50	87°	71	72

Documentation

Download: Chemical resistance

Download: Methodological recommendations for project design

Chemkor Shumeks T-piece 45°, socket connection, uPVC, d - 50, d1 - 50 [Code number: 2391060]

Details

2391060

158 rub

Purpose of application:

For draining water/household waste into the sewer system
For residential, public and industrial buildings
For exhaust pipes
For the removal of rain and melt water (the number of storeys of buildings should not exceed 4 floors, the pressure of the water column - up to 1.5 atmospheres)

Characteristics:

Resistance to microorganisms, fungi and bacteria;
Fast installation;
Connection type: socket;
Ring stiffness: SN8;
High sound absorption - noise level 5-11 dB (flow rate 0.5-2 l/s);
High resistance to alkalis, acids and surfactants;
The temperature of the discharged liquids can vary from the freezing point of the effluents themselves to +60 °С (a short-term increase to +95 °С is possible);
The ignition temperature is +482 ° C - it does not melt, it is almost non-toxic, it does not form burning drops, it practically does not emit smoke;
Warranty period: 2 years from the date of manufacture (if the rules of transportation and storage are observed);
Service life: at least 50 years.

It is painted white.

Technical characteristics

Dn	D	α	L	Z1	Z2	Z2
mm	mm		mm	mm	mm	mm
50	50	45°	158,0	46,0	101,0	101,0

Documentation

Download: Chemical resistance

Download: Methodological recommendations for project design

Chemkor Shumeks T-piece 87°, socket connection, uPVC, d - 50, d1 - 50 [Code number: 2391061]

Details

2391061

140 rub

Purpose of application:

For draining water/household waste into the sewer system
For residential, public and industrial buildings
For exhaust pipes
For the removal of rain and melt water (the number of storeys of buildings should not exceed 4 floors, the pressure of the water column - up to 1.5 atmospheres)

Characteristics:

Resistance to microorganisms, fungi and bacteria;
Fast installation;
Connection type: socket;
Ring stiffness: SN8;
High sound absorption - noise level 5-11 dB (flow rate 0.5-2 l/s);
High resistance to alkalis, acids and surfactants;
The temperature of the discharged liquids can vary from the freezing point of the effluents themselves to +60 °С (a short-term increase to +95 °С is possible);
The ignition temperature is +482 ° C - it does not melt, it is almost non-toxic, it does not form burning drops, it practically does not emit smoke;
Warranty period: 2 years from the date of manufacture (if the rules of transportation and storage are observed);
Service life: at least 50 years.

It is painted white.

Technical characteristics

Dn	D	α	L	Z1	Z2	Z2
mm	mm		mm	mm	mm	mm
50	50	87°	142,0	46,0	71,0	71,0

Documentation

Download: Chemical resistance

Download: Methodological recommendations for project design

Chemkor Shumeks T-piece 45°, socket connection, uPVC, d - 110, d1 - 50 [Code number: 2391062]

Details

2391062

350 rub

Purpose of application:

For draining water/household waste into the sewer system
For residential, public and industrial buildings
For exhaust pipes
For the removal of rain and melt water (the number of storeys of buildings should not exceed 4 floors, the pressure of the water column - up to 1.5 atmospheres)

Characteristics:

Resistance to microorganisms, fungi and bacteria;
Fast installation;
Connection type: socket;
Ring stiffness: SN8;
High sound absorption - noise level 5-11 dB (flow rate 0.5-2 l/s);
High resistance to alkalis, acids and surfactants;
The temperature of the discharged liquids can vary from the freezing point of the effluents themselves to +60 °С (a short-term increase to +95 °С is possible);
The ignition temperature is +482 ° C - it does not melt, it is almost non-toxic, it does not form burning drops, it practically does not emit smoke;
Warranty period: 2 years from the date of manufacture (if the rules of transportation and storage are observed);
Service life: at least 50 years.

It is painted white.

Technical characteristics

Dn	D	α	L	Z1	Z2	Z2
mm	mm		mm	mm	mm	mm
110	50	45°	186,5	60,0	143,0	146,0

Documentation

Download: Chemical resistance

Download: Methodological recommendations for project design

Chemkor Shumeks T-piece 87°, socket connection, uPVC, d - 110, d1 - 50 [Code number: 2391063]

Details

2391063

315 rub

Purpose of application:

For draining water/household waste into the sewer system
For residential, public and industrial buildings
For exhaust pipes
For the removal of rain and melt water (the number of storeys of buildings should not exceed 4 floors, the pressure of the water column - up to 1.5 atmospheres)

Characteristics:

Resistance to microorganisms, fungi and bacteria;
Fast installation;
Connection type: socket;
Ring stiffness: SN8;
High sound absorption - noise level 5-11 dB (flow rate 0.5-2 l/s);
High resistance to alkalis, acids and surfactants;
The temperature of the discharged liquids can vary from the freezing point of the effluents themselves to +60 °С (a short-term increase to +95 °С is possible);
The ignition temperature is +482 ° C - it does not melt, it is almost non-toxic, it does not form burning drops, it practically does not emit smoke;
Warranty period: 2 years from the date of manufacture (if the rules of transportation and storage are observed);
Service life: at least 50 years.

It is painted white.

Technical characteristics

Dn	D	α	L	Z1	Z2	Z2
mm	mm		mm	mm	mm	mm
110	50	87°	171,5	60,0	100,5	87,5

Documentation

Download: Chemical resistance

Download: Methodological recommendations for project design

Chemkor Shumeks T-piece 45°, socket connection, uPVC, d - 110, d1 - 110 [Code number: 2391064]

Details

2391064

584 rub

Purpose of application:

For draining water/household waste into the sewer system
For residential, public and industrial buildings
For exhaust pipes
For the removal of rain and melt water (the number of storeys of buildings should not exceed 4 floors, the pressure of the water column - up to 1.5 atmospheres)

Characteristics:

Resistance to microorganisms, fungi and bacteria;
Fast installation;
Connection type: socket;
Ring stiffness: SN8;
High sound absorption - noise level 5-11 dB (flow rate 0.5-2 l/s);
High resistance to alkalis, acids and surfactants;
The temperature of the discharged liquids can vary from the freezing point of the effluents themselves to +60 °С (a short-term increase to +95 °С is possible);
The ignition temperature is +482 ° C - it does not melt, it is almost non-toxic, it does not form burning drops, it practically does not emit smoke;
Warranty period: 2 years from the date of manufacture (if the rules of transportation and storage are observed);
Service life: at least 50 years.

It is painted white.

Technical characteristics

Dn	D	α	L	Z1	Z2	Z2
mm	mm		mm	mm	mm	mm
110	110	45°	271,0	60,0	194,0	188,0

Documentation

Download: Chemical resistance

Download: Methodological recommendations for project design

Chemkor Shumeks T-piece 87°, socket connection, uPVC, d - 110, d1 - 110 [Code number: 2391065]

Details

2391065

466 rub

Purpose of application:

For draining water/household waste into the sewer system
For residential, public and industrial buildings
For exhaust pipes
For the removal of rain and melt water (the number of storeys of buildings should not exceed 4 floors, the pressure of the water column - up to 1.5 atmospheres)

Characteristics:

Resistance to microorganisms, fungi and bacteria;
Fast installation;
Connection type: socket;
Ring stiffness: SN8;
High sound absorption - noise level 5-11 dB (flow rate 0.5-2 l/s);
High resistance to alkalis, acids and surfactants;
The temperature of the discharged liquids can vary from the freezing point of the effluents themselves to +60 °С (a short-term increase to +95 °С is possible);
The ignition temperature is +482 ° C - it does not melt, it is almost non-toxic, it does not form burning drops, it practically does not emit smoke;
Warranty period: 2 years from the date of manufacture (if the rules of transportation and storage are observed);
Service life: at least 50 years.

It is painted white.

Technical characteristics

Dn	D	α	L	Z1	Z2	Z2
mm	mm		mm	mm	mm	mm
110	110	87°	231,0	60,0	120,0	117,0

Documentation

Download: Chemical resistance

Download: Methodological recommendations for project design

Chemkor Shumeks Reducer, socket connection, uPVC, d - 110, d1 - 50 [Code number: 2391066]

Details

2391066

197 rub

Purpose of application:

For draining water/household waste into the sewer system
For residential, public and industrial buildings
For exhaust pipes
For the removal of rain and melt water (the number of storeys of buildings should not exceed 4 floors, the pressure of the water column - up to 1.5 atmospheres)

Characteristics:

Resistance to microorganisms, fungi and bacteria;
Fast installation;
Connection type: socket;
Ring stiffness: SN8;
High sound absorption - noise level 5-11 dB (flow rate 0.5-2 l/s);
High resistance to alkalis, acids and surfactants;
The temperature of the discharged liquids can vary from the freezing point of the effluents themselves to +60 °С (a short-term increase to +95 °С is possible);
The ignition temperature is +482 ° C - it does not melt, it is almost non-toxic, it does not form burning drops, it practically does not emit smoke;
Warranty period: 2 years from the date of manufacture (if the rules of transportation and storage are observed);
Service life: at least 50 years.

It is painted white.

Technical characteristics

DN	D	L	Z1
mm	mm	mm	mm
110	50	142,5	43

Documentation

Download: Chemical resistance

Download: Methodological recommendations for project design

Chemkor Internal sewerage Cap for socket, uPVC, d - 110 [Code number: 2391072]

Details

2391072

93 rub

Purpose of application:

For draining water/household waste into the sewer system
For residential, public and industrial buildings
For exhaust pipes
For the removal of rain and melt water (the number of storeys of buildings should not exceed 4 floors, the pressure of the water column - up to 1.5 atmospheres)

Characteristics:

High resistance to UV radiation - under the influence of ultraviolet, the physical and mechanical properties of the material do not change;
Resistance to microorganisms, fungi and bacteria;
Fast installation;
Connection type: socket;
Ring stiffness: SN8;
High resistance to alkalis, acids and surfactants;
The temperature of the discharged liquids can vary from the freezing point of the effluents themselves to +60 °С (a short-term increase to +95 °С is possible);
The ignition temperature is +482 ° C - it does not melt, it is almost non-toxic, it does not form burning drops, it practically does not emit smoke;
Refers to the flammability class G1 (GOST 30244-94);
Warranty period: 2 years from the date of manufacture (if the rules of transportation and storage are observed);
Service life: about 100 years.

It is painted grey.

Technical characteristics

Dn	L	Weight
mm	mm	kg
110	41,3	0,1

Documentation

Download: Chemical resistance

Download: Methodological recommendations for project design

Chemkor Internal sewerage Cap for socket, uPVC, d - 50 [Code number: 2391073]

Details

2391073

27 rub

Purpose of application:

For draining water/household waste into the sewer system
For residential, public and industrial buildings
For exhaust pipes
For the removal of rain and melt water (the number of storeys of buildings should not exceed 4 floors, the pressure of the water column - up to 1.5 atmospheres)

Characteristics:

High resistance to UV radiation - under the influence of ultraviolet, the physical and mechanical properties of the material do not change;
Resistance to microorganisms, fungi and bacteria;
Fast installation;
Connection type: socket;
Ring stiffness: SN8;
High resistance to alkalis, acids and surfactants;
The temperature of the discharged liquids can vary from the freezing point of the effluents themselves to +60 °С (a short-term increase to +95 °С is possible);
The ignition temperature is +482 ° C - it does not melt, it is almost non-toxic, it does not form burning drops, it practically does not emit smoke;
Refers to the flammability class G1 (GOST 30244-94);
Warranty period: 2 years from the date of manufacture (if the rules of transportation and storage are observed);
Service life: about 100 years.

It is painted grey.

Technical characteristics

Dn	L	Weight
mm	mm	kg
50	30,5	0,05

Documentation

Download: Chemical resistance

Download: Methodological recommendations for project design

Geberit HDPE Cap, screw, d 90mm [Code number: 240.331.00.1]

Details

240.331.00.1

ATTENTION! This product is temporarily unavailable for order!

Wavin Optima double branch fitting 67°, PVC, d - 50x50x50 [Code number: 24326500]

Details

24326500

309 rub

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

For domestic drainage systems

Description

Wavin Optima double branch fitting is suitable for the installation of internal drainage systems, it is used for connection of pipeline branches at angle 67°.

The pipe is equipped with a sealing ring made of butadiene styrene - it is created a sealed connection.

Technical characteristics

Material: polyvinyl chloride (PVC).

Color: gray.

Dy/Dy1/Dy1	L1	Z1	Z2	α
mm	mm	mm	mm
50/50/50	104	63	41	67°

Wavin Optima double branch fitting 67°, PVC, d - 75x75x75 [Code number: 24337500]

Details

24337500

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

For domestic drainage systems

Description

Wavin Optima double branch fitting is suitable for the installation of internal drainage systems, it is used for connection of pipeline branches at angle 67°.

The pipe is equipped with a sealing ring made of butadiene styrene - it is created a sealed connection.

Technical characteristics

Material: polyvinyl chloride (PVC).

Color: gray.

Dy/Dy1/Dy1	L1	Z1	Z2	α
mm	mm	mm	mm
75/75/75	137	77	60	67°

Wavin Optima double branch fitting 67°, PVC, d - 110x75x75 [Code number: 24346520]

Details

24346520

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

For domestic drainage systems

Description

Wavin Optima double branch fitting is suitable for the installation of internal drainage systems, it is used for connection of pipeline branches at angle 67°.

The pipe is equipped with a sealing ring made of butadiene styrene - it is created a sealed connection.

Technical characteristics

Material: polyvinyl chloride (PVC).

Color: gray.

Dy/Dy1/Dy1	L1	Z1	Z2	α
mm	mm	mm	mm
110/75/75	137	70	78	67°

RTP BETA ELITE Bend 45°, MPP, d - 110, white [Code number: 24418]

Details

24418 (RTP)

204 rub