Logo
Ru| En

Office: M. Baumanskaya

Warehouse: Lenin Hills

Fittings for domestic sewerage

Home→ Catalog→ Sewerage→ Domestic sewerage→ Pipeline systems→ Fittings for domestic sewerage

When installing internal sewage, special fittings are used that are connected to pipes:

  1. Elbows are fittings designed to connect pipes at an angle. Our catalog includes bends with an angle of inclination of 15°, 30°, 45°, 67°, 87°. All sewer outlets meet Russian and European requirements and are made of high quality materials.
  2. Tees - system elements used to change the angle of inclination and direction of water flow, to create an additional branch. Products with an outlet angle of 45°, 67°, 87° are produced.
  3. Crosses are used to create two branches (in some cases three) from the main pipeline.
  4. Revisions are a short pipe with a side branch with a tight-fitting lid. This element of the sewer system is used to clean the pipeline without dismantling.
  5. Reducers are used to connect sewer pipes with different diameters.
  6. Plugs on the smooth end of the pipe or on the socket are used to plug the dead end section of the pipeline.
  7. Siphons are mounted with sanitary equipment.
  8. Brackets allow you to rigidly fix the pipeline system.
  9. Flanges can be cast iron or plastic. Blind, transitional, connecting, prefabricated flanges, as well as flanges for passing through the roof are produced.
Photo Наименование Article Цена
Photo Draft
Photo Geberit HDPE Waste fitting outlet bend 90°, with offset LH connector for wall-hung WC, d 110, d1 110 [Code number: 367.901.16.1] Draft Geberit HDPE Waste fitting outlet bend 90°, with offset LH connector for wall-hung WC, d 110, d1 110 [Code number: 367.901.16.1]
Geberit HDPE Waste fitting outlet bend 90°, with offset LH connector for wall-hung WC, d 110, d1 110 [Code number: 367.901.16.1]
Details 		367.901.16.1

ATTENTION! This product is temporarily unavailable for order!

Application purpose:

  • For building drainage
  • For WC GIS and Duofix elements

Scope of delivery:

  • EPDM Seal
  • Sleeve

Offset: left hand

Type: eccentric.

d d1 A a H L K
mm mm mm mm mm mm mm
110 110 7,5 4,5 10 32 17
Photo Draft
Photo Geberit HDPE Waste fitting outlet bend 90°, for wall-hung WC, d 110, d1 110 [Code number: 367.902.16.1] Draft Geberit HDPE Waste fitting outlet bend 90°, for wall-hung WC, d 110, d1 110 [Code number: 367.902.16.1]
Geberit HDPE Waste fitting outlet bend 90°, for wall-hung WC, d 110, d1 110 [Code number: 367.902.16.1]
Details 		367.902.16.1

ATTENTION! This product is temporarily unavailable for order!

Application purpose:

  • For building drainage
  • For WC GIS and Duofix elements

Scope of delivery:

  • EPDM Seal
  • Sleeve

Offset: right

Type: eccentric.

d d1 A a H L K
mm mm mm mm mm mm mm
110 110 7,5 4,5 10 32 17
Photo Draft
Photo Geberit HDPE Double bend 90° with connectors for wall-hung WC vertical installation, d110, d1 110 [Code number: 367.903.16.1] Draft Geberit HDPE Double bend 90° with connectors for wall-hung WC vertical installation, d110, d1 110 [Code number: 367.903.16.1]
Geberit HDPE Double bend 90° with connectors for wall-hung WC vertical installation, d110, d1 110 [Code number: 367.903.16.1]
Details 		367.903.16.1

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For building drainage
  • For vertical installation
  • For connecting sanitary appliances with horizontal outlet
  • For Geberit Duofix, Geberit GIS and Geberit Kombifix elements for wall-hung WC

Characteristics:

  • UV-resistant
  • With seal made of EPDM

Scope of delivery:

  • 2 protective caps

Material: PE-HD

d d1 A a H K
mm mm cm cm cm cm
110 110 28.5 11 20.5 5
Photo Draft
Photo Geberit HDPE Waste fitting outlet bend 90°, for wall-hung WC, d 110, d1 90 [Code number: 367.913.16.1] Draft Geberit HDPE Waste fitting outlet bend 90°, for wall-hung WC, d 110, d1 90 [Code number: 367.913.16.1]
Geberit HDPE Waste fitting outlet bend 90°, for wall-hung WC, d 110, d1 90 [Code number: 367.913.16.1]
Details 		367.913.16.1

ATTENTION! This product is temporarily unavailable for order!

Application purpose:

  • For building drainage
  • For WC GIS and Duofix elements

Scope of delivery:

  • EPDM Seal
  • Sleeve

Offset: left hand

Type: eccentric.

d d1 A a H L K
mm mm mm mm mm mm mm
110 90 7,5 4,5 10 32 17
Photo Draft
Photo Geberit HDPE Waste fitting outlet bend 90°, for wall-hung WC, d 110, d1 90 [Code number: 367.914.16.1] Draft Geberit HDPE Waste fitting outlet bend 90°, for wall-hung WC, d 110, d1 90 [Code number: 367.914.16.1]
Geberit HDPE Waste fitting outlet bend 90°, for wall-hung WC, d 110, d1 90 [Code number: 367.914.16.1]
Details 		367.914.16.1

ATTENTION! This product is temporarily unavailable for order!

Application purpose:

  • For building drainage
  • For WC GIS and Duofix elements

Scope of delivery:

  • EPDM Seal
  • Sleeve

Offset: right

Type: eccentric.

d d1 A a H L K
mm mm mm mm mm mm mm
110 90 7,5 4,5 10 32 17
Photo Draft
Photo Geberit HDPE Double bend 90° with connectors for wall-hung WC vertical installation, d 110, d1 90 [Code number: 367.923.16.1] Draft Geberit HDPE Double bend 90° with connectors for wall-hung WC vertical installation, d 110, d1 90 [Code number: 367.923.16.1]
Geberit HDPE Double bend 90° with connectors for wall-hung WC vertical installation, d 110, d1 90 [Code number: 367.923.16.1]
Details 		367.923.16.1

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For building drainage
  • For vertical installation
  • For connecting sanitary appliances with horizontal outlet
  • For Geberit Duofix, Geberit GIS and Geberit Kombifix elements for wall-hung WC

Characteristics:

  • UV-resistant
  • With seal made of EPDM

Scope of delivery:

  • 2 protective caps

Material: PE-HD

d d1 A a H K
mm mm cm cm cm cm
110 90 27.5 10.5 32.5 19
Photo Draft
Photo Geberit HDPE Bend with connector for wall-hung WC, d110, d1 90 [Code number: 367.925.16.1] Draft Geberit HDPE Bend with connector for wall-hung WC, d110, d1 90 [Code number: 367.925.16.1]
Geberit HDPE Bend with connector for wall-hung WC, d110, d1 90 [Code number: 367.925.16.1]
Details 		367.925.16.1

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For building drainage
  • For vertical installation
  • For Geberit Kombifix elements for wall-hung WC
  • For connecting sanitary appliances with horizontal outlet

Characteristics:

  • UV-resistant
  • With seal made of EPDM

Material: PE-HD

d d1 A a H K
mm mm cm cm cm cm
110 90 7.5 4.5 22.5 13
Photo Draft
Photo Geberit HDPE Protecting cap for weathering slates, d110 [Code number: 367.989.16.1] Draft Geberit HDPE Protecting cap for weathering slates, d110 [Code number: 367.989.16.1]
Geberit HDPE Protecting cap for weathering slates, d110 [Code number: 367.989.16.1]
Details 		367.989.16.1

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For all drainage pipes
  • For enclosing ventilation pipes
  • For sliding on

Characteristics:

  • UV-resistant

Material: PE-HD

d D H
mm cm cm
110 17 11
Photo Draft
Photo Geberit HDPE Предохранительный колпак для канализационных стояков, черный, d 110mm, DN 100 [Code number: 367.989.16.2] Draft Geberit HDPE Предохранительный колпак для канализационных стояков, черный, d 110mm, DN 100 [Code number: 367.989.16.2]
Geberit HDPE Предохранительный колпак для канализационных стояков, черный, d 110mm, DN 100 [Code number: 367.989.16.2]
Details 		367.989.16.2

ATTENTION! This product is temporarily unavailable for order!
Photo Draft
Photo Geberit HDPE Bend 45°, d125 [Code number: 368.045.16.1] Draft Geberit HDPE Bend 45°, d125 [Code number: 368.045.16.1]
Geberit HDPE Bend 45°, d125 [Code number: 368.045.16.1]
Details 		368.045.16.1

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For building drainage

Characteristics:

  • UV-resistant
  • Can be welded on both sides with electrofusion coupling

Technical data

Material: PE-HD

d X K
mm cm cm
125 6.5 2.5
Photo Draft
Photo Geberit HDPE Bend 90° with large leg, d125 [Code number: 368.055.16.1] Draft Geberit HDPE Bend 90° with large leg, d125 [Code number: 368.055.16.1]
Geberit HDPE Bend 90° with large leg, d125 [Code number: 368.055.16.1]
Details 		368.055.16.1

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For building drainage

Characteristics:

  • UV-resistant
  • Wide radius

Technical data

Material: PE-HD

d X1 X2 K1 r
mm cm cm cm cm
125 20 11 9 11
Photo Draft
Photo Geberit HDPE Bend 88.5°, d125 [Code number: 368.088.16.1] Draft Geberit HDPE Bend 88.5°, d125 [Code number: 368.088.16.1]
Geberit HDPE Bend 88.5°, d125 [Code number: 368.088.16.1]
Details 		368.088.16.1

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For building drainage

Characteristics:

  • UV-resistant

Technical data

Material: PE-HD

d X K
mm cm cm
125 10 2.5
Photo Draft
Photo Geberit HDPE Y-branch fitting 135° (45°), d125, d1 63 [Code number: 368.120.16.1] Draft Geberit HDPE Y-branch fitting 135° (45°), d125, d1 63 [Code number: 368.120.16.1]
Geberit HDPE Y-branch fitting 135° (45°), d125, d1 63 [Code number: 368.120.16.1]
Details 		368.120.16.1

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For building drainage

Characteristics:

  • UV-resistant

Material: PE-HD

d d1 H X1 X2 X3 K1 K2 K3
mm mm cm cm cm cm cm cm cm
125 63 30 10 20 20 10.5 4.5 6
Photo Draft
Photo Geberit HDPE Y-branch fitting 135° (45°), d125, d1 75 [Code number: 368.125.16.1] Draft Geberit HDPE Y-branch fitting 135° (45°), d125, d1 75 [Code number: 368.125.16.1]
Geberit HDPE Y-branch fitting 135° (45°), d125, d1 75 [Code number: 368.125.16.1]
Details 		368.125.16.1

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For building drainage

Characteristics:

  • UV-resistant

Material: PE-HD

d d1 H X1 X2 X3 K1 K2 K3
mm mm cm cm cm cm cm cm cm
125 75 30 10 20 20 9.5 4 5
Photo Draft
Photo Geberit HDPE Y-branch fitting 135° (45°), d125, d1 90 [Code number: 368.130.16.1] Draft Geberit HDPE Y-branch fitting 135° (45°), d125, d1 90 [Code number: 368.130.16.1]
Geberit HDPE Y-branch fitting 135° (45°), d125, d1 90 [Code number: 368.130.16.1]
Details 		368.130.16.1

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For building drainage

Characteristics:

  • UV-resistant

Material: PE-HD

d d1 H X1 X2 X3 K1 K2 K3
mm mm cm cm cm cm cm cm cm
125 90 30 10 20 20 8.5 3 3.5
Photo Draft
Photo Geberit HDPE Y-branch fitting 135° (45°), d125, d1 110 [Code number: 368.135.16.1] Draft Geberit HDPE Y-branch fitting 135° (45°), d125, d1 110 [Code number: 368.135.16.1]
Geberit HDPE Y-branch fitting 135° (45°), d125, d1 110 [Code number: 368.135.16.1]
Details 		368.135.16.1

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For building drainage

Characteristics:

  • UV-resistant

Material: PE-HD

d d1 H X1 X2 X3 K1 K2 K3
mm mm cm cm cm cm cm cm cm
125 110 30 10 20 20 7 2.5 2.5
Photo Draft
Photo Geberit HDPE Y-branch fitting 135° (45°), d125, d1 125 [Code number: 368.139.16.1] Draft Geberit HDPE Y-branch fitting 135° (45°), d125, d1 125 [Code number: 368.139.16.1]
Geberit HDPE Y-branch fitting 135° (45°), d125, d1 125 [Code number: 368.139.16.1]
Details 		368.139.16.1

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For building drainage

Characteristics:

  • UV-resistant

Material: PE-HD

d d1 H X1 X2 X3 K1 K2 K3
mm mm cm cm cm cm cm cm cm
125 125 30 10 20 20 6 2 2
Photo Draft
Photo Geberit HDPE Branch fitting 91.5° (88,5°), d125, d1 50 [Code number: 368.162.16.1] Draft Geberit HDPE Branch fitting 91.5° (88,5°), d125, d1 50 [Code number: 368.162.16.1]
Geberit HDPE Branch fitting 91.5° (88,5°), d125, d1 50 [Code number: 368.162.16.1]
Details 		368.162.16.1

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For all drainage pipes

Characteristics:

  • UV-resistant

Material: PE-HD

d d1 H X1 X2 X3 K1 K2 K3
mm mm cm cm cm cm cm cm cm
125 50 25 15 10 10 11 2.5 6
Photo Draft
Photo Geberit HDPE Branch fitting 91.5° (88,5°), d125, d1 56 [Code number: 368.165.16.1] Draft Geberit HDPE Branch fitting 91.5° (88,5°), d125, d1 56 [Code number: 368.165.16.1]
Geberit HDPE Branch fitting 91.5° (88,5°), d125, d1 56 [Code number: 368.165.16.1]
Details 		368.165.16.1

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For all drainage pipes

Characteristics:

  • UV-resistant

Material: PE-HD

d d1 H X1 X2 X3 K1 K2 K3
mm mm cm cm cm cm cm cm cm
125 56 25 15 10 10 10.5 2.5 5.5
Photo Draft
Photo Geberit HDPE Branch fitting 91.5° (88,5°), d125, d1 63 [Code number: 368.170.16.1] Draft Geberit HDPE Branch fitting 91.5° (88,5°), d125, d1 63 [Code number: 368.170.16.1]
Geberit HDPE Branch fitting 91.5° (88,5°), d125, d1 63 [Code number: 368.170.16.1]
Details 		368.170.16.1

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For all drainage pipes

Characteristics:

  • UV-resistant

Material: PE-HD

d d1 H X1 X2 X3 K1 K2 K3
mm mm cm cm cm cm cm cm cm
125 63 25 15 10 10 10.5 2.5 5
© Inrusstrade.ru 1999-2026. "Inrusstrade" Ltd. Copying and quoting is prohibited