Logo
Ru| En

Fittings for domestic sewerage

Home→ Catalog→ Sewerage→ Domestic sewerage→ Pipeline systems→ Fittings for domestic sewerage

When installing internal sewage, special fittings are used that are connected to pipes:

  1. Elbows are fittings designed to connect pipes at an angle. Our catalog includes bends with an angle of inclination of 15°, 30°, 45°, 67°, 87°. All sewer outlets meet Russian and European requirements and are made of high quality materials.
  2. Tees - system elements used to change the angle of inclination and direction of water flow, to create an additional branch. Products with an outlet angle of 45°, 67°, 87° are produced.
  3. Crosses are used to create two branches (in some cases three) from the main pipeline.
  4. Revisions are a short pipe with a side branch with a tight-fitting lid. This element of the sewer system is used to clean the pipeline without dismantling.
  5. Reducers are used to connect sewer pipes with different diameters.
  6. Plugs on the smooth end of the pipe or on the socket are used to plug the dead end section of the pipeline.
  7. Siphons are mounted with sanitary equipment.
  8. Brackets allow you to rigidly fix the pipeline system.
  9. Flanges can be cast iron or plastic. Blind, transitional, connecting, prefabricated flanges, as well as flanges for passing through the roof are produced.
Photo Name Article Price
Photo
Photo SINICON Standard T-piece 45°, PP, d - 75, d1 - 50 (Certus) [Code number: 510019CR]
SINICON Standard T-piece 45°, PP, d - 75, d1 - 50 (Certus) [Code number: 510019CR]
Details 		510019CR 309 rub
Photo Draft
Photo (ARTICLE REPLACEMENT: 510019CR) - SINIKON Standart T-piece 45°, PP, d - 75, d1 - 50 [Code number: 510019.R] Draft (ARTICLE REPLACEMENT: 510019CR) - SINIKON Standart T-piece 45°, PP, d - 75, d1 - 50 [Code number: 510019.R]
(ARTICLE REPLACEMENT: 510019CR) - SINIKON Standart T-piece 45°, PP, d - 75, d1 - 50 [Code number: 510019.R]
Details 		510019.R

Application purposes:

  • For domestic drainage system

Material: Polypropylene (PP)

Warranty: 20 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

d d2 Angle Weight Colour
mm mm   kg  
75 50 45° 0,131 Gray
Photo Draft
Photo SINIKON Standart T-piece 67˚, PP, d - 75/50 [Code number: 510021.C] Draft SINIKON Standart T-piece 67˚, PP, d - 75/50 [Code number: 510021.C]
SINIKON Standart T-piece 67˚, PP, d - 75/50 [Code number: 510021.C]
Details 		510021.C 226 rub

Application purposes:

  • For domestic drainage system
  • For branching of the pipeline

Material: Polypropylene (PP)

Warranty: 20 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d d1 Angle Colour
mm mm    
75 50 67˚ Gray
Photo Draft
Photo (REPLACEMENT: 510021.C) - SINIKON Standart T-piece 67°, PP, d - 75x50 [Code number: 510021.R] Draft (REPLACEMENT: 510021.C) - SINIKON Standart T-piece 67°, PP, d - 75x50 [Code number: 510021.R]
(REPLACEMENT: 510021.C) - SINIKON Standart T-piece 67°, PP, d - 75x50 [Code number: 510021.R]
Details 		510021.R

Application purposes:

  • For domestic drainage system

Material: Polypropylene (PP)

Warranty: 10 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

d d2 Angle Weight Colour
mm mm   kg  
75 50 67° 0,116 Gray
Photo Draft
Photo (ARTICLE REPLACEMENT: 510023CR) - SINIKON Standart T-piece 87˚, PP, d - 75/50 [Code number: 510023.C] Draft (ARTICLE REPLACEMENT: 510023CR) - SINIKON Standart T-piece 87˚, PP, d - 75/50 [Code number: 510023.C]
(ARTICLE REPLACEMENT: 510023CR) - SINIKON Standart T-piece 87˚, PP, d - 75/50 [Code number: 510023.C]
Details 		510023.C

Application purposes:

  • For domestic drainage system
  • For branching of the pipeline

Material: Polypropylene (PP)

Warranty: 20 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d d1 Angle Colour
mm mm    
75 50 87˚ Gray
Photo
Photo SINICON Standard T-piece 87°, PP, d - 75, d1 - 50 (Certus) [Code number: 510023CR]
SINICON Standard T-piece 87°, PP, d - 75, d1 - 50 (Certus) [Code number: 510023CR]
Details 		510023CR 309 rub
Photo Draft
Photo (REPLACEMENT: 510023.C) - SINIKON Standart T-piece 87°, PP, d - 75x50 [Code number: 510023.R] Draft (REPLACEMENT: 510023.C) - SINIKON Standart T-piece 87°, PP, d - 75x50 [Code number: 510023.R]
(REPLACEMENT: 510023.C) - SINIKON Standart T-piece 87°, PP, d - 75x50 [Code number: 510023.R]
Details 		510023.R

Application purposes:

  • For domestic drainage system

Material: Polypropylene (PP)

Warranty: 10 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

d d2 Angle Weight Colour
mm mm   kg  
75 50 87° 0,116 Gray
Photo Draft
Photo SINIKON Standart T-piece 45°, PP, PP, d - 110*40 (Valsir) [Code number: 510025] Draft SINIKON Standart T-piece 45°, PP, PP, d - 110*40 (Valsir) [Code number: 510025]
SINIKON Standart T-piece 45°, PP, PP, d - 110*40 (Valsir) [Code number: 510025]
Details 		510025 508 rub

Application purposes:

  • For domestic drainage system

Material: Polypropylene (PP)

Warranty: 10 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

d d2 Angle Weight Colour
mm mm   kg  
110 40 45° 0,220 Gray
Photo Draft
Photo SINIKON Standart T-piece 87°, PP, PP, d - 110*40 (Valsir) [Code number: 510029] Draft SINIKON Standart T-piece 87°, PP, PP, d - 110*40 (Valsir) [Code number: 510029]
SINIKON Standart T-piece 87°, PP, PP, d - 110*40 (Valsir) [Code number: 510029]
Details 		510029 508 rub

Application purposes:

  • For domestic drainage system

Material: Polypropylene (PP)

Warranty: 10 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

d d2 Angle Weight Colour
mm mm   kg  
110 40 87° 0,105 Gray
Photo Draft
Photo SINIKON Comfort Plus T-piece 45°, PP, d - 110*50 [Code number: 510031.K] Draft SINIKON Comfort Plus T-piece 45°, PP, d - 110*50 [Code number: 510031.K]
SINIKON Comfort Plus T-piece 45°, PP, d - 110*50 [Code number: 510031.K]
Details 		510031.K 241 rub

Application purposes:

  • For domestic drainage system
  • For buildings with increased noise insulation requirements

Material: homopolymer of propylene PP-H with mineral additives

Warranty: 20 years

Coefficient of linear expansion: 0,15 mm/m °С

Maximum working temperature: +80 °С

d d2 Angle Wall thickness Colour
mm mm   mm  
110 50 45° 2,7 white
Photo Draft
Photo SINIKON Standart T-piece 45°, PP, d - 110*50 [Code number: 510031.R] Draft SINIKON Standart T-piece 45°, PP, d - 110*50 [Code number: 510031.R]
SINIKON Standart T-piece 45°, PP, d - 110*50 [Code number: 510031.R]
Details 		510031.R 172 rub

Application purposes:

  • For domestic drainage system

Material: Polypropylene (PP)

Warranty: 20 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

d d2 Angle Weight Colour
mm mm   kg  
110 50 45° 0,250 Gray
Photo Draft
Photo SINIKON Standart T-piece 67°, PP, PP, d - 110*50 (Valsir) [Code number: 510033] Draft SINIKON Standart T-piece 67°, PP, PP, d - 110*50 (Valsir) [Code number: 510033]
SINIKON Standart T-piece 67°, PP, PP, d - 110*50 (Valsir) [Code number: 510033]
Details 		510033 521 rub

Application purposes:

  • For domestic drainage system

Material: Polypropylene (PP)

Warranty: 10 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

d d2 Angle Weight Colour
mm mm   kg  
110 50 67° 0,235 Gray
Photo Draft
Photo SINIKON Comfort Plus T-piece 87°, PP, d - 110*50 [Code number: 510035.K] Draft SINIKON Comfort Plus T-piece 87°, PP, d - 110*50 [Code number: 510035.K]
SINIKON Comfort Plus T-piece 87°, PP, d - 110*50 [Code number: 510035.K]
Details 		510035.K 241 rub

Application purposes:

  • For domestic drainage system
  • For buildings with increased noise insulation requirements

Material: homopolymer of propylene PP-H with mineral additives

Warranty: 20 years

Coefficient of linear expansion: 0,15 mm/m °С

Maximum working temperature: +80 °С

Reinforced fitting with increased wall thickness.

d d2 Angle Wall thickness Colour
mm mm   mm  
110 50 87° 3,4 white
Photo Draft
Photo SINIKON Standart T-piece 87°, PP, d - 110*50 [Code number: 510035.R] Draft SINIKON Standart T-piece 87°, PP, d - 110*50 [Code number: 510035.R]
SINIKON Standart T-piece 87°, PP, d - 110*50 [Code number: 510035.R]
Details 		510035.R 172 rub

Application purposes:

  • For domestic drainage system

Material: Polypropylene (PP)

Warranty: 20 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

d d2 Angle Weight Colour
mm mm   kg  
110 50 87° 0,230 Gray
Photo Draft
Photo (PART NUMBER REPLACED TO: 510037CR) - SINIKON Standart T-piece 45˚, PP, d - 110x75 [Code number: 510037.C] Draft (PART NUMBER REPLACED TO: 510037CR) - SINIKON Standart T-piece 45˚, PP, d - 110x75 [Code number: 510037.C]
(PART NUMBER REPLACED TO: 510037CR) - SINIKON Standart T-piece 45˚, PP, d - 110x75 [Code number: 510037.C]
Details 		510037.C

Application purposes:

  • For domestic drainage system
  • For branching of the pipeline

Material: Polypropylene (PP)

Warranty: 20 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d d1 Angle Colour
mm mm    
110 75 45˚ Gray
Photo
Photo SINIKON Standart T-piece 45˚, PP, d - 110, d1 - 75 (Certus) [Code number: 510037CR]
SINIKON Standart T-piece 45˚, PP, d - 110, d1 - 75 (Certus) [Code number: 510037CR]
Details 		510037CR 471 rub
Photo Draft
Photo (REPLACEMENT: 510037.C) - SINIKON Standart T-piece 45°, PP, d - 110x75 [Code number: 510037.R] Draft (REPLACEMENT: 510037.C) - SINIKON Standart T-piece 45°, PP, d - 110x75 [Code number: 510037.R]
(REPLACEMENT: 510037.C) - SINIKON Standart T-piece 45°, PP, d - 110x75 [Code number: 510037.R]
Details 		510037.R

Application purposes:

  • For domestic drainage system

Material: Polypropylene (PP)

Warranty: 10 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

d d2 Angle Weight Colour
mm mm   kg  
110 75 45° 0.266 Gray
Photo Draft
Photo SINIKON Standart T-piece 67˚, PP, d - 110x75 [Code number: 510039.C] Draft SINIKON Standart T-piece 67˚, PP, d - 110x75 [Code number: 510039.C]
SINIKON Standart T-piece 67˚, PP, d - 110x75 [Code number: 510039.C]
Details 		510039.C 334 rub

Application purposes:

  • For domestic drainage system
  • For branching of the pipeline

Material: Polypropylene (PP)

Warranty: 20 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d d1 Angle Colour
mm mm    
110 75 67˚ Gray
Photo Draft
Photo (REPLACEMENT: 510039.C) - SINIKON Standart T-piece 67°, PP, d - 110x75 [Code number: 510039.R] Draft (REPLACEMENT: 510039.C) - SINIKON Standart T-piece 67°, PP, d - 110x75 [Code number: 510039.R]
(REPLACEMENT: 510039.C) - SINIKON Standart T-piece 67°, PP, d - 110x75 [Code number: 510039.R]
Details 		510039.R

Application purposes:

  • For domestic drainage system

Material: Polypropylene (PP)

Warranty: 10 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

d d2 Angle Weight Colour
mm mm   kg  
110 75 67° 0,242 Gray
Photo Draft
Photo (PART NUMBER REPLACED TO: 510041CR] -SINIKON Standart T-piece 87˚, PP, d - 110x75 [Code number: 510041.C] Draft (PART NUMBER REPLACED TO: 510041CR] -SINIKON Standart T-piece 87˚, PP, d - 110x75 [Code number: 510041.C]
(PART NUMBER REPLACED TO: 510041CR] -SINIKON Standart T-piece 87˚, PP, d - 110x75 [Code number: 510041.C]
Details 		510041.C 428 rub

Application purposes:

  • For domestic drainage system
  • For branching of the pipeline

Material: Polypropylene (PP)

Warranty: 20 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d d1 Angle Colour
mm mm    
110 75 87˚ Gray

© Inrusstrade.ru 1999-2024. "Inrusstrade" Ltd. Copying and quoting is prohibited