Logo
Ru| En

Fittings for domestic sewerage

Home→ Catalog→ Sewerage→ Domestic sewerage→ Pipeline systems→ Fittings for domestic sewerage

When installing internal sewage, special fittings are used that are connected to pipes:

  1. Elbows are fittings designed to connect pipes at an angle. Our catalog includes bends with an angle of inclination of 15°, 30°, 45°, 67°, 87°. All sewer outlets meet Russian and European requirements and are made of high quality materials.
  2. Tees - system elements used to change the angle of inclination and direction of water flow, to create an additional branch. Products with an outlet angle of 45°, 67°, 87° are produced.
  3. Crosses are used to create two branches (in some cases three) from the main pipeline.
  4. Revisions are a short pipe with a side branch with a tight-fitting lid. This element of the sewer system is used to clean the pipeline without dismantling.
  5. Reducers are used to connect sewer pipes with different diameters.
  6. Plugs on the smooth end of the pipe or on the socket are used to plug the dead end section of the pipeline.
  7. Siphons are mounted with sanitary equipment.
  8. Brackets allow you to rigidly fix the pipeline system.
  9. Flanges can be cast iron or plastic. Blind, transitional, connecting, prefabricated flanges, as well as flanges for passing through the roof are produced.
Photo Name Article Price
Photo Draft
Photo (REPLACEMENT: 504043.C) - SINIKON Standart Bend 67°, PP, D75 [Code number: 504043.R] Draft (REPLACEMENT: 504043.C) - SINIKON Standart Bend 67°, PP, D75 [Code number: 504043.R]
(REPLACEMENT: 504043.C) - SINIKON Standart Bend 67°, PP, D75 [Code number: 504043.R]
Details 		504043.R

Application purposes:

  • For domestic drainage system

Material: Polypropylene (PP)

Warranty: 10 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

d Angle Weight Colour
mm   kg  
75 67° 0,090 Gray
Photo
Photo (REPLACEMENT: 504047.R) - SINIKON Standart Bend 87˚, D75 [Code number: 504047.C]
(REPLACEMENT: 504047.R) - SINIKON Standart Bend 87˚, D75 [Code number: 504047.C]
Details 		504047.C

Application purposes:

  • For domestic drainage system
  • For changing direction of the pipeline

Material: Polypropylene (PP)

Warranty: 10 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d Angle Colour
mm    
75 87˚ Gray
Photo
Photo SINICON Standard Bend 87°, PP, d - 75 (Certus) [Code number: 504047CR]
SINICON Standard Bend 87°, PP, d - 75 (Certus) [Code number: 504047CR]
Details 		504047CR 247 rub
Photo Draft
Photo (ARTICLE REPLACEMENT: 504047CR) - SINIKON Standart Bend 87°, PP, D75 [Code number: 504047.R] Draft (ARTICLE REPLACEMENT: 504047CR) - SINIKON Standart Bend 87°, PP, D75 [Code number: 504047.R]
(ARTICLE REPLACEMENT: 504047CR) - SINIKON Standart Bend 87°, PP, D75 [Code number: 504047.R]
Details 		504047.R 87 rub

Application purposes:

  • For domestic drainage system

Material: Polypropylene (PP)

Warranty: 20 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

d Angle Weight Colour
mm   kg  
75 87° 0,097 Gray
Photo Draft
Photo SINIKON Comfort Plus Bend 15°, PP, d - 110 [Code number: 504049.K] Draft SINIKON Comfort Plus Bend 15°, PP, d - 110 [Code number: 504049.K]
SINIKON Comfort Plus Bend 15°, PP, d - 110 [Code number: 504049.K]
Details 		504049.K 198 rub

Application purposes:

  • For domestic drainage system
  • For buildings with increased noise insulation requirements

Material: homopolymer of propylene PP-H with mineral additives

Warranty: 20 years

Coefficient of linear expansion: 0,15 mm/m °С

Maximum working temperature: +80 °С

d Angle Wall thickness Colour
mm   mm  
110 15° 2,7 white
Photo Draft
Photo SINIKON Standart Bend 15°, PP, d - 110 [Code number: 504049.R] Draft SINIKON Standart Bend 15°, PP, d - 110 [Code number: 504049.R]
SINIKON Standart Bend 15°, PP, d - 110 [Code number: 504049.R]
Details 		504049.R 141 rub

Application purposes:

  • For domestic drainage system

Material: Polypropylene (PP)

Warranty: 20 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

d Angle Weight Colour
mm   kg  
110 15° 0,165 Gray
Photo
Photo SINIKON Universal Bend 15° for outdoor sewage, PP, d - 110 [Code number: 504049.U]
SINIKON Universal Bend 15° for outdoor sewage, PP, d - 110 [Code number: 504049.U]
Details 		504049.U 163 rub

Application purposes:

  • For domestic drainage system
  • For outdoor drainage system
  • For storm water drainage system

Material: homopolymer of propylene PP-H

Warranty: 20 years

Maximum continuous temperature of waste water: +80 °С

Maximum short-term of waste water: +95 °С

Service life: not less than 50 years

d Angle Colour
mm    
110 15° brown
Photo Draft
Photo SINIKON Comfort Plus Bend 30°, PP, d - 110 [Code number: 504051.K] Draft SINIKON Comfort Plus Bend 30°, PP, d - 110 [Code number: 504051.K]
SINIKON Comfort Plus Bend 30°, PP, d - 110 [Code number: 504051.K]
Details 		504051.K 198 rub

Application purposes:

  • For domestic drainage system
  • For buildings with increased noise insulation requirements

Material: homopolymer of propylene PP-H with mineral additives

Warranty: 20 years

Coefficient of linear expansion: 0,15 mm/m °С

Maximum working temperature: +80 °С

d Angle Wall thickness Colour
mm   mm  
110 30° 2,7 white
Photo Draft
Photo SINIKON Standart Bend 30°, PP, d - 110 [Code number: 504051.R] Draft SINIKON Standart Bend 30°, PP, d - 110 [Code number: 504051.R]
SINIKON Standart Bend 30°, PP, d - 110 [Code number: 504051.R]
Details 		504051.R 122 rub

Application purposes:

  • For domestic drainage system

Material: Polypropylene (PP)

Warranty: 20 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

d Angle Weight Colour
mm   kg  
110 30° 0,175 Gray
Photo
Photo SINIKON Universal Bend 30° for outdoor sewage, PP, d - 110 [Code number: 504051.U]
SINIKON Universal Bend 30° for outdoor sewage, PP, d - 110 [Code number: 504051.U]
Details 		504051.U 163 rub

Application purposes:

  • For domestic drainage system
  • For outdoor drainage system
  • For storm water drainage system

Material: homopolymer of propylene PP-H

Warranty: 20 years

Maximum continuous temperature of waste water: +80 °С

Maximum short-term of waste water: +95 °С

Service life: not less than 50 years

d Angle Colour
mm    
110 30° brown
Photo Draft
Photo SINIKON Comfort Plus Bend 45°, PP, d - 110 [Code number: 504053.K] Draft SINIKON Comfort Plus Bend 45°, PP, d - 110 [Code number: 504053.K]
SINIKON Comfort Plus Bend 45°, PP, d - 110 [Code number: 504053.K]
Details 		504053.K 180 rub

Application purposes:

  • For domestic drainage system
  • For buildings with increased noise insulation requirements

Material: homopolymer of propylene PP-H with mineral additives

Warranty: 20 years

Coefficient of linear expansion: 0,15 mm/m °С

Maximum working temperature: +80 °С

Reinforced fitting with increased wall thickness.

d Angle Wall thickness Colour
mm   mm  
110 45° 3,4 white
Photo Draft
Photo SINIKON Standart Bend 45°, PP, d - 110 [Code number: 504053.R] Draft SINIKON Standart Bend 45°, PP, d - 110 [Code number: 504053.R]
SINIKON Standart Bend 45°, PP, d - 110 [Code number: 504053.R]
Details 		504053.R 129 rub

Application purposes:

  • For domestic drainage system

Material: Polypropylene (PP)

Warranty: 20 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

d Angle Weight Colour
mm   kg  
110 45° 0,185 Gray
Photo
Photo SINIKON Universal Bend 45° for outdoor sewage, PP, d - 110 [Code number: 504053.U]
SINIKON Universal Bend 45° for outdoor sewage, PP, d - 110 [Code number: 504053.U]
Details 		504053.U 163 rub

Application purposes:

  • For domestic drainage system
  • For outdoor drainage system
  • For storm water drainage system

Material: homopolymer of propylene PP-H

Warranty: 20 years

Maximum continuous temperature of waste water: +80 °С

Maximum short-term of waste water: +95 °С

Service life: not less than 50 years

d Angle Colour
mm    
110 45° brown
Photo Draft
Photo SINIKON Comfort Plus Bend 67°, PP, d - 110 [Code number: 504055.K] Draft SINIKON Comfort Plus Bend 67°, PP, d - 110 [Code number: 504055.K]
SINIKON Comfort Plus Bend 67°, PP, d - 110 [Code number: 504055.K]
Details 		504055.K 198 rub

Application purposes:

  • For domestic drainage system
  • For buildings with increased noise insulation requirements

Material: homopolymer of propylene PP-H with mineral additives

Warranty: 20 years

Coefficient of linear expansion: 0,15 mm/m °С

Maximum working temperature: +80 °С

d Angle Wall thickness Colour
mm   mm  
110 67° 2,7 white
Photo Draft
Photo SINIKON Standart Bend 67°, PP, d - 110 [Code number: 504055.R] Draft SINIKON Standart Bend 67°, PP, d - 110 [Code number: 504055.R]
SINIKON Standart Bend 67°, PP, d - 110 [Code number: 504055.R]
Details 		504055.R 141 rub

Application purposes:

  • For domestic drainage system

Material: Polypropylene (PP)

Warranty: 20 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

d Angle Weight Colour
mm   kg  
110 67° 0,215 Gray
Photo Draft
Photo SINIKON Comfort Plus Bend 87°, PP, d - 110 [Code number: 504059.K] Draft SINIKON Comfort Plus Bend 87°, PP, d - 110 [Code number: 504059.K]
SINIKON Comfort Plus Bend 87°, PP, d - 110 [Code number: 504059.K]
Details 		504059.K 180 rub

Application purposes:

  • For domestic drainage system
  • For buildings with increased noise insulation requirements

Material: homopolymer of propylene PP-H with mineral additives

Warranty: 20 years

Coefficient of linear expansion: 0,15 mm/m °С

Maximum working temperature: +80 °С

Reinforced fitting with increased wall thickness.

d Angle Wall thickness Colour
mm   mm  
110 87° 3,4 white
Photo Draft
Photo SINIKON Standart Bend 87°, PP, PP, d - 110 [Code number: 504059.R] Draft SINIKON Standart Bend 87°, PP, PP, d - 110 [Code number: 504059.R]
SINIKON Standart Bend 87°, PP, PP, d - 110 [Code number: 504059.R]
Details 		504059.R 129 rub

Application purposes:

  • For domestic drainage system

Material: Polypropylene (PP)

Warranty: 20 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

d Angle Weight Colour
mm   kg  
110 87° 0,230 Gray
Photo Draft
Photo SINIKON Universal Bend 87° for outdoor sewage, PP, d - 110 [Code number: 504059.U] Draft SINIKON Universal Bend 87° for outdoor sewage, PP, d - 110 [Code number: 504059.U]
SINIKON Universal Bend 87° for outdoor sewage, PP, d - 110 [Code number: 504059.U]
Details 		504059.U 163 rub

Application purposes:

  • For domestic drainage system
  • For outdoor drainage system
  • For storm water drainage system

Material: homopolymer of propylene PP-H

Warranty: 20 years

Maximum continuous temperature of waste water: +80 °С

Maximum short-term of waste water: +95 °С

Service life: not less than 50 years

d Angle Colour
mm    
110 87° brown
Photo
Photo SINICON Universal Bend 45°, PP, d - 160 [Code number: 504077.U]
SINICON Universal Bend 45°, PP, d - 160 [Code number: 504077.U]
Details 		504077.U 414 rub
Photo
Photo SINICON Universal Bend 87°, PP, d - 160 [Code number: 504083.U]
SINICON Universal Bend 87°, PP, d - 160 [Code number: 504083.U]
Details 		504083.U 414 rub

© Inrusstrade.ru 1999-2024. "Inrusstrade" Ltd. Copying and quoting is prohibited