Pipeline systems

HL 521 is a shower trap which is installed in shower trays and equipped with ball-joint. The shower trap is flat, drain hole d 90 mm. Trap can be removed, there is stainless steel cover plate d 113 mm also. Mounting height is 60 mm.

HL 522 Shower trap DN40/50 is intended for installation in a shower tray and is equipped with a waste hole d 90mm and ball-joint for horizontal or vertical use. Also shower trap is equipped with a removable trap seal insert. Stainless steel coverplate 113 mm can paint in different colors. Capacity is 0,50 l/s. Mounting height is 83 mm.

HL 522.0 Shower trap body DN40/50 is intended for installation in a shower tray and is equipped with a waste hole d 90mm and ball-joint for horizontal or vertical use. Also shower trap is equipped with a removable trap seal insert. Capacity is 0,50 l/s. Mounting height is 83 mm.

Purpose of use:

• For shower cabin

Main characteristics:

• type of outlet - articulated joint;
• there is a stainless steel grate.

Diameter: DN40/50.

Capacity: 0.5 l/s.

Subframe size: 123x123 mm.

Main advantages of HL siphons for shower trays:

• self-cleaning ability;
• made of high-quality raw materials;
• simple and quick installation;
• tightness of connections;
• high throughput.

Purpose of use:

• For shower cabins

Main characteristics:

• type of outlet - articulated joint;
• the grille is made of stainless steel;;
• for shower cabins with a height of 30-50 mm.

Diameter: DN40/50.

Subframe size: 123x123 mm.

Subframe size: 123x123 mm

Main advantages of HL siphons for shower trays:

• self-cleaning ability;
• made of high-quality raw materials;
• simple and quick installation;
• tightness of connections;
• high throughput.

Purpose of use:

• For shower cabins

Main characteristics:

• type of outlet - articulated joint;
• for shower cabins with a height of 30-50 mm.

Diameter: DN40/50.

Subframe size: 123x123 mm.

Main advantages of HL siphons for shower trays:

• self-cleaning ability;
• made of high-quality raw materials;
• simple and quick installation;
• tightness of connections;
• high throughput.

HL 522V Shower trap DN40/50 is intended for installation in a shower tray and is equipped with a waste hole d 90mm and ball-joint for horizontal or vertical use. Also shower trap is equipped with a removable trap seal insert and trapped hose connector 8 - 13 mm. Shower trap is made of polypropylene, it weighs 565 grams. Capacity is 0,50 l/s. Mounting height is 83 mm. Stainless steel coverplate 112 mm can paint in different colors.

Documentation

Download example of product installation:  Shower trap HL 522V

The HL Company produces prefabricated shower floor HL 523N-110*90. Include:
- Protection plate 110x90 cm with gravity layer. Plate is made of EPS;
- Shower trap DN50 with ball-joint, adjustable from vertical to horizontal;
- Siphon;
- Mounting plug;
- Stainless steel grate 115 x 115 mm and chromed frame 121 x 121 mm.
Application purpose: for shower trays.

">

Application area:

• For shower trays

Characteristics:

• Material: PP
• Dimension: DN50
• capacity: 0,8 l/s
• installation height: 85 mm
• grate: Plate d 75mm chrome-plated

Weight: 0,321 kg

Characteristics of HL sewage equipment:

• Complies with ISO 9001
• Safety for ecology and health
• Products undergo laboratory testing
• Durability
• Attractive appearance

Size: 5/4"

Weight: 0,012 kg/pc

Floor drain body is made of polymer with sound disconnected adjusting screws, with fitting for grates, with fiber glass textile and removable sifon, with ball joint outlet DN50, adjustable 0-15° horizontal.

The HL 530 mounting block with an integrated drain. This product is designed for wall-mounted installation and provides linear drainage from floor level. It is used in showers with a concrete structure. The drain, integrated into the mounting plate, can be used to drain wastewater with temperatures below 85°C. The height of the extension can be adjusted by trimming it during installation. The drain body, integrated into the mounting plate, can be rotated 180° if necessary. The dimensions of the block are 1200 x 256 x 115 mm. It is supplied without a grate or subframe.

Application purpose:

• For waste disposal

Characteristics:

• the height of the shower tray is 79 mm;
• built into the mounting element, which is made of extruded polystyrene EPS-40 (size 1200x200x79 mm);
• there is a subframe (size 499x80x13 mm), as well as a grate (size 480x50 mm) made of stainless steel;
• the surface of the mounting casing is covered with Montaplast waterproofing sheet;
• suitable for wall mounting;
• the length is adjusted to the desired trimming (no more than 600 mm);
• element HL531V is used to extend the tray;
• the slope to the wall is 3°;
• it is possible to use wall tiles (thickness with tile adhesive no more than 17 mm) or floor tiles (thickness with tile adhesive no more than 28 mm);
• the drain is equipped with a dry siphon "Primus" (water seal height 25 mm);
• warranty period: 1 year;
• service life: 50 years.

Dimensions and components

Technical characteristics

Shower channel HL 531.0 is integrated in an EPS-installation block. Waterproof, fleece-laminated surface with 3% incline. For direct tiling. You can fine-tune of shower channel. Channel is equipped with PRIMUS-trap - this device allows you forget about the unpleasant smell of sewage. Another important advantage of the shower channel is its capacity - 0.6 l/s. For near-wall installation. Including lot cover, but without stainless steel cover.

Shower channel HL 531.0/18 is integrated in an EPS-installation block. It is also equipped with stainless steel frame, but without cover. Waterproof, fleece-laminated surface with 3% incline. For direct tiling. You can fine-tune of shower channel. Channel is equipped with PRIMUS-trap - this device allows you forget about the unpleasant smell of sewage. Another important advantage of the shower channel is its capacity - 0.6 l/s. For near-wall installation. Including lot cover..

Shower channel HL 531.0/23 is integrated in an EPS-installation block. It is also equipped with stainless steel frame, but without cover. Waterproof, fleece-laminated surface with 3% incline. For direct tiling. You can fine-tune of shower channel. Channel is equipped with PRIMUS-trap - this device allows you forget about the unpleasant smell of sewage. Another important advantage of the shower channel is its capacity - 0.6 l/s. For near-wall installation. Including lot cover..

Shower channel HL 531.0/28 is integrated in an EPS-installation block. It is also equipped with stainless steel frame, but without cover. Waterproof, fleece-laminated surface with 3% incline. For direct tiling. You can fine-tune of shower channel. Channel is equipped with PRIMUS-trap - this device allows you forget about the unpleasant smell of sewage. Another important advantage of the shower channel is its capacity - 0.6 l/s. For near-wall installation. Including lot cover..

Shower channel HL 531/18 is integrated in an EPS-installation block. It is also equipped with stainless steel frame. Waterproof, fleece-laminated surface with 3% incline. For direct tiling. You can fine-tune of shower channel. Channel is equipped with PRIMUS-trap - this device allows you forget about the unpleasant smell of sewage. Another important advantage of the shower channel is its capacity - 0.6 l/s. For near-wall installation. Including lot cover..

Shower channel HL 531/23 is integrated in an EPS-installation block. It is also equipped with stainless steel frame. Waterproof, fleece-laminated surface with 3% incline. For direct tiling. You can fine-tune of shower channel. Channel is equipped with PRIMUS-trap - this device allows you forget about the unpleasant smell of sewage. Another important advantage of the shower channel is its capacity - 0.6 l/s. For near-wall installation. Including lot cover..