Pipeline systems

Dimensions are presented in mm

Application area:

• For air condition and ventilation

Characteristics:

• Material: ABS (PS)

Weight: 0,03 kg

Application area:

• For shower trays

Characteristics:

• Material: EPDM

Weight: 0,048 kg

Space saver tubular trap HL 126.2/50 DN 50 horizontal is made of polypropylene. This device is designed so that it saves a lot of space under a sink, and trap is equipped with ball-joint outlet. Trap with connector DN40 x 1 1/2' for double sinks.

HL 134.0/50 concealed trap is embedded into the wall. HL 134.0/50 is made of polypropylene, it has diameter of 50 mm and capacity of 0.38 l/s. Trap insert can be removed if necessary.

Application area:

• For bath

Characteristics:

• Material: PP
• Size: DN40
• Includes 6/4" swivel nut
• Acts as an extension

Weight: 0.080 kg.

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

• For building drainage
• For buildings with increased sound insulation requirements

Characteristics:

• Abrasion resistant;
• Sound-absorbing;
• UV-resistant.

Material: PE-S2

Thermal expansion: 0.17 mm/(m*K)

Thermal conductivity, pipe: 0.43 W/(m*K)

According to DIN 1986, part 1, section 6.1.2, the changes of the direction of main pipelines and sewers may be fulfilled only with using prefabricated pipe bend, and each individual bend can have a maximum angle of 45^˚. In some cases, for these purposes can be used two pipe bends 45^˚. Due to the double knee one connecting element is saved and the installation becomes easier. In addition, this fitting provides a good opportunity to place the fastening element in its middle. The bend is also intended for use as a transition from the riser to a horizontal pipe, and vice versa.

*Diameter 80 gradually replace diameter 70

Dimensions are presented in mm

Dimensions are presented in mm

Rehau RAUPIANO PLUS lock to cap is used when installing sound absorbing sewerage system RAUPIANO PLUS for fast and durable fixation of pipe cap. It is made of strip steel.

For pipe caps with diameter of 110 mm.

Characteristics of HL sewage equipment:

• Complies with ISO 9001
• Safety for ecology and health
• Products undergo laboratory testing
• Durability
• Attractive appearance

HL 134.1C 90° angled brass-connector is intended for HL 134 and HL 134.0. Angled brass-connector is made of brass, it is chrome plated, diameter 32 x 5/4". Height of the dip tube can be controlled. It also has a threaded connection 5/4.

HL 3 - it is non-return valve 1' with hose connector 3/4'. Valve is made of polypropylene. Weight HL 3 is small - it is only 60 g.

Application purposes:

• For waste and overflow assembly

Characteristics:

• brass

Material: Edelmessing

Weight: 0,305 kg

К - maximum cut length