OGNEZA fire collars | Inrusstrade

Photo	Наименование	Article
Photo	OGNEZA PM(V)-L Fire prevention ventilation sleeve, d 125 (price on request) [Code number: 1r0007] Details	1r0007
Application purpose: For fire protection of ventilation ducts Characteristics: fire resistance not less than EI 180; when the temperature rises to +150 °C, the fire-retardant material of the fire-fighting sleeve expands tenfold. Compound: metal case (painted with polymer powder paint); an insert in the form of a tape made of a special thermally expanding material "OGNEZA-TRM"; lamellas; sealant made of thermally expanding material; fastening eyelets. Mounting scheme: Installation Recommendations: installation is carried out at temperatures from -50 °С to +60 °С; the installation site is pre-cleaned; the attachment points should not have cracks, and the thickness of the hard layer should allow the installation of a fixing metal dowel; mounted in channels with an internal diameter of 125 mm to 240 mm; the gap between the channel wall and the coupling should not be more than 5 mm; the coupling is installed in the channel, after which the points of attachment of the lugs to the enclosing structure are marked with a marker; holes are drilled and dowels are installed (must be metal!); the coupling is fixed with self-tapping screws. Diameter: DN 125.
Photo	OGNEZA PM(V)-L Fire prevention ventilation sleeve, d 130 (price on request) [Code number: 1r0008] Details	1r0008
Application purpose: For fire protection of ventilation ducts Characteristics: fire resistance not less than EI 180; when the temperature rises to +150 °C, the fire-retardant material of the fire-fighting sleeve expands tenfold. Compound: metal case (painted with polymer powder paint); an insert in the form of a tape made of a special thermally expanding material "OGNEZA-TRM"; lamellas; sealant made of thermally expanding material; fastening eyelets. Mounting scheme: Installation Recommendations: installation is carried out at temperatures from -50 °С to +60 °С; the installation site is pre-cleaned; the attachment points should not have cracks, and the thickness of the hard layer should allow the installation of a fixing metal dowel; mounted in channels with an internal diameter of 125 mm to 240 mm; the gap between the channel wall and the coupling should not be more than 5 mm; the coupling is installed in the channel, after which the points of attachment of the lugs to the enclosing structure are marked with a marker; holes are drilled and dowels are installed (must be metal!); the coupling is fixed with self-tapping screws. Diameter: DN 130.
Photo	OGNEZA PM(V)-L Fire prevention ventilation sleeve, d 140 (price on request) [Code number: 1r0009] Details	1r0009
Application purpose: For fire protection of ventilation ducts Characteristics: fire resistance not less than EI 180; when the temperature rises to +150 °C, the fire-retardant material of the fire-fighting sleeve expands tenfold. Compound: metal case (painted with polymer powder paint); an insert in the form of a tape made of a special thermally expanding material "OGNEZA-TRM"; lamellas; sealant made of thermally expanding material; fastening eyelets. Mounting scheme: Installation Recommendations: installation is carried out at temperatures from -50 °С to +60 °С; the installation site is pre-cleaned; the attachment points should not have cracks, and the thickness of the hard layer should allow the installation of a fixing metal dowel; mounted in channels with an internal diameter of 125 mm to 240 mm; the gap between the channel wall and the coupling should not be more than 5 mm; the coupling is installed in the channel, after which the points of attachment of the lugs to the enclosing structure are marked with a marker; holes are drilled and dowels are installed (must be metal!); the coupling is fixed with self-tapping screws. Diameter: DN 140.
Photo	OGNEZA PM(V)-L Fire prevention ventilation sleeve, d 150 (price on request) [Code number: 1r0010] Details	1r0010
Application purpose: For fire protection of ventilation ducts Characteristics: fire resistance not less than EI 180; when the temperature rises to +150 °C, the fire-retardant material of the fire-fighting sleeve expands tenfold. Compound: metal case (painted with polymer powder paint); an insert in the form of a tape made of a special thermally expanding material "OGNEZA-TRM"; lamellas; sealant made of thermally expanding material; fastening eyelets. Mounting scheme: Installation Recommendations: installation is carried out at temperatures from -50 °С to +60 °С; the installation site is pre-cleaned; the attachment points should not have cracks, and the thickness of the hard layer should allow the installation of a fixing metal dowel; mounted in channels with an internal diameter of 125 mm to 240 mm; the gap between the channel wall and the coupling should not be more than 5 mm; the coupling is installed in the channel, after which the points of attachment of the lugs to the enclosing structure are marked with a marker; holes are drilled and dowels are installed (must be metal!); the coupling is fixed with self-tapping screws. Diameter: DN 150.
Photo	OGNEZA PM(V)-L Fire prevention ventilation sleeve, d 160 (price on request) [Code number: 1r0011] Details	1r0011
Application purpose: For fire protection of ventilation ducts Characteristics: fire resistance not less than EI 180; when the temperature rises to +150 °C, the fire-retardant material of the fire-fighting sleeve expands tenfold. Compound: metal case (painted with polymer powder paint); an insert in the form of a tape made of a special thermally expanding material "OGNEZA-TRM"; lamellas; sealant made of thermally expanding material; fastening eyelets. Mounting scheme: Installation Recommendations: installation is carried out at temperatures from -50 °С to +60 °С; the installation site is pre-cleaned; the attachment points should not have cracks, and the thickness of the hard layer should allow the installation of a fixing metal dowel; mounted in channels with an internal diameter of 125 mm to 240 mm; the gap between the channel wall and the coupling should not be more than 5 mm; the coupling is installed in the channel, after which the points of attachment of the lugs to the enclosing structure are marked with a marker; holes are drilled and dowels are installed (must be metal!); the coupling is fixed with self-tapping screws. Diameter: DN 160.
Photo	OGNEZA PM(V)-L Fire prevention ventilation sleeve, d 170 (price on request) [Code number: 1r0012] Details	1r0012
Application purpose: For fire protection of ventilation ducts Characteristics: fire resistance not less than EI 180; when the temperature rises to +150 °C, the fire-retardant material of the fire-fighting sleeve expands tenfold. Compound: metal case (painted with polymer powder paint); an insert in the form of a tape made of a special thermally expanding material "OGNEZA-TRM"; lamellas; sealant made of thermally expanding material; fastening eyelets. Mounting scheme: Installation Recommendations: installation is carried out at temperatures from -50 °С to +60 °С; the installation site is pre-cleaned; the attachment points should not have cracks, and the thickness of the hard layer should allow the installation of a fixing metal dowel; mounted in channels with an internal diameter of 125 mm to 240 mm; the gap between the channel wall and the coupling should not be more than 5 mm; the coupling is installed in the channel, after which the points of attachment of the lugs to the enclosing structure are marked with a marker; holes are drilled and dowels are installed (must be metal!); the coupling is fixed with self-tapping screws. Diameter: DN 170.
Photo	OGNEZA PM(V)-L Fire prevention ventilation sleeve, d 180 (price on request) [Code number: 1r0013] Details	1r0013
Application purpose: For fire protection of ventilation ducts Characteristics: fire resistance not less than EI 180; when the temperature rises to +150 °C, the fire-retardant material of the fire-fighting sleeve expands tenfold. Compound: metal case (painted with polymer powder paint); an insert in the form of a tape made of a special thermally expanding material "OGNEZA-TRM"; lamellas; sealant made of thermally expanding material; fastening eyelets. Mounting scheme: Installation Recommendations: installation is carried out at temperatures from -50 °С to +60 °С; the installation site is pre-cleaned; the attachment points should not have cracks, and the thickness of the hard layer should allow the installation of a fixing metal dowel; mounted in channels with an internal diameter of 125 mm to 240 mm; the gap between the channel wall and the coupling should not be more than 5 mm; the coupling is installed in the channel, after which the points of attachment of the lugs to the enclosing structure are marked with a marker; holes are drilled and dowels are installed (must be metal!); the coupling is fixed with self-tapping screws. Diameter: DN 180.
Photo	OGNEZA PM(V)-L Fire prevention ventilation sleeve, d 190 (price on request) [Code number: 1r0014] Details	1r0014
Application purpose: For fire protection of ventilation ducts Characteristics: fire resistance not less than EI 180; when the temperature rises to +150 °C, the fire-retardant material of the fire-fighting sleeve expands tenfold. Compound: metal case (painted with polymer powder paint); an insert in the form of a tape made of a special thermally expanding material "OGNEZA-TRM"; lamellas; sealant made of thermally expanding material; fastening eyelets. Mounting scheme: Installation Recommendations: installation is carried out at temperatures from -50 °С to +60 °С; the installation site is pre-cleaned; the attachment points should not have cracks, and the thickness of the hard layer should allow the installation of a fixing metal dowel; mounted in channels with an internal diameter of 125 mm to 240 mm; the gap between the channel wall and the coupling should not be more than 5 mm; the coupling is installed in the channel, after which the points of attachment of the lugs to the enclosing structure are marked with a marker; holes are drilled and dowels are installed (must be metal!); the coupling is fixed with self-tapping screws. Diameter: DN 190.
Photo	OGNEZA PM(V)-L Fire prevention ventilation sleeve, d 200 (price on request) [Code number: 1r0015] Details	1r0015
Application purpose: For fire protection of ventilation ducts Characteristics: fire resistance not less than EI 180; when the temperature rises to +150 °C, the fire-retardant material of the fire-fighting sleeve expands tenfold. Compound: metal case (painted with polymer powder paint); an insert in the form of a tape made of a special thermally expanding material "OGNEZA-TRM"; lamellas; sealant made of thermally expanding material; fastening eyelets. Mounting scheme: Installation Recommendations: installation is carried out at temperatures from -50 °С to +60 °С; the installation site is pre-cleaned; the attachment points should not have cracks, and the thickness of the hard layer should allow the installation of a fixing metal dowel; mounted in channels with an internal diameter of 125 mm to 240 mm; the gap between the channel wall and the coupling should not be more than 5 mm; the coupling is installed in the channel, after which the points of attachment of the lugs to the enclosing structure are marked with a marker; holes are drilled and dowels are installed (must be metal!); the coupling is fixed with self-tapping screws. Diameter: DN 200.
Photo	OGNEZA PM(V)-L Fire prevention ventilation sleeve, d 210 (price on request) [Code number: 1r0016] Details	1r0016
Application purpose: For fire protection of ventilation ducts Characteristics: fire resistance not less than EI 180; when the temperature rises to +150 °C, the fire-retardant material of the fire-fighting sleeve expands tenfold. Compound: metal case (painted with polymer powder paint); an insert in the form of a tape made of a special thermally expanding material "OGNEZA-TRM"; lamellas; sealant made of thermally expanding material; fastening eyelets. Mounting scheme: Installation Recommendations: installation is carried out at temperatures from -50 °С to +60 °С; the installation site is pre-cleaned; the attachment points should not have cracks, and the thickness of the hard layer should allow the installation of a fixing metal dowel; mounted in channels with an internal diameter of 125 mm to 240 mm; the gap between the channel wall and the coupling should not be more than 5 mm; the coupling is installed in the channel, after which the points of attachment of the lugs to the enclosing structure are marked with a marker; holes are drilled and dowels are installed (must be metal!); the coupling is fixed with self-tapping screws. Diameter: DN 210.
Photo	OGNEZA PM(V)-L Fire prevention ventilation sleeve, d 220 (price on request) [Code number: 1r0017] Details	1r0017
Application purpose: For fire protection of ventilation ducts Characteristics: fire resistance not less than EI 180; when the temperature rises to +150 °C, the fire-retardant material of the fire-fighting sleeve expands tenfold. Compound: metal case (painted with polymer powder paint); an insert in the form of a tape made of a special thermally expanding material "OGNEZA-TRM"; lamellas; sealant made of thermally expanding material; fastening eyelets. Mounting scheme: Installation Recommendations: installation is carried out at temperatures from -50 °С to +60 °С; the installation site is pre-cleaned; the attachment points should not have cracks, and the thickness of the hard layer should allow the installation of a fixing metal dowel; mounted in channels with an internal diameter of 125 mm to 240 mm; the gap between the channel wall and the coupling should not be more than 5 mm; the coupling is installed in the channel, after which the points of attachment of the lugs to the enclosing structure are marked with a marker; holes are drilled and dowels are installed (must be metal!); the coupling is fixed with self-tapping screws. Diameter: DN 220.
Photo	OGNEZA PM(V)-L Fire prevention ventilation sleeve, d 230 (price on request) [Code number: 1r0018] Details	1r0018
Application purpose: For fire protection of ventilation ducts Characteristics: fire resistance not less than EI 180; when the temperature rises to +150 °C, the fire-retardant material of the fire-fighting sleeve expands tenfold. Compound: metal case (painted with polymer powder paint); an insert in the form of a tape made of a special thermally expanding material "OGNEZA-TRM"; lamellas; sealant made of thermally expanding material; fastening eyelets. Mounting scheme: Installation Recommendations: installation is carried out at temperatures from -50 °С to +60 °С; the installation site is pre-cleaned; the attachment points should not have cracks, and the thickness of the hard layer should allow the installation of a fixing metal dowel; mounted in channels with an internal diameter of 125 mm to 240 mm; the gap between the channel wall and the coupling should not be more than 5 mm; the coupling is installed in the channel, after which the points of attachment of the lugs to the enclosing structure are marked with a marker; holes are drilled and dowels are installed (must be metal!); the coupling is fixed with self-tapping screws. Diameter: DN 230.
Photo	OGNEZA PM(V)-L Fire prevention ventilation sleeve, d 240 (price on request) [Code number: 1r0019] Details	1r0019
Application purpose: For fire protection of ventilation ducts Characteristics: fire resistance not less than EI 180; when the temperature rises to +150 °C, the fire-retardant material of the fire-fighting sleeve expands tenfold. Compound: metal case (painted with polymer powder paint); an insert in the form of a tape made of a special thermally expanding material "OGNEZA-TRM"; lamellas; sealant made of thermally expanding material; fastening eyelets. Mounting scheme: Installation Recommendations: installation is carried out at temperatures from -50 °С to +60 °С; the installation site is pre-cleaned; the attachment points should not have cracks, and the thickness of the hard layer should allow the installation of a fixing metal dowel; mounted in channels with an internal diameter of 125 mm to 240 mm; the gap between the channel wall and the coupling should not be more than 5 mm; the coupling is installed in the channel, after which the points of attachment of the lugs to the enclosing structure are marked with a marker; holes are drilled and dowels are installed (must be metal!); the coupling is fixed with self-tapping screws. Diameter: DN 240.
Photo	OGNEZA PM(V)-T Fire prevention ventilation sleeve, d 125 (price on request) [Code number: 1r0020] Details	1r0020
Application purpose: For installation with plastic ventilation ducts For residential buildings (including apartment buildings), hospitals, hostels, hotels, shopping centers, airports and train stations, industrial enterprises Characteristics: fire resistance not less than EI 180; suitable for walls with an additional partition and an air gap between them. Compound: perforated fixed sleeve body; metal case of the movable sleeve (painted with polymer powder paint); thermally expanding material "OGNEZA-TRM"; movable sleeve seal; lamellas; fastening eyelets. Installation Recommendations: installation is carried out at temperatures from -50 °С to +60 °С; the installation site is pre-cleaned; the attachment points should not have cracks, and the thickness of the hard layer should allow the installation of a fixing metal dowel; the gap between the sleeve and the channel wall must be less than 5 mm; fixing eyes are bent in the plane of the base of the coupling; the coupling is installed in the channel, after which the points of attachment of the lugs to the enclosing structure are marked with a marker. Diameter: DN 125.
Photo	OGNEZA PM(V)-T Fire prevention ventilation sleeve, d 132 (price on request) [Code number: 1r0021] Details	1r0021
Application purpose: For installation with plastic ventilation ducts For residential buildings (including apartment buildings), hospitals, hostels, hotels, shopping centers, airports and train stations, industrial enterprises Characteristics: fire resistance not less than EI 180; suitable for walls with an additional partition and an air gap between them. Compound: perforated fixed sleeve body; metal case of the movable sleeve (painted with polymer powder paint); thermally expanding material "OGNEZA-TRM"; movable sleeve seal; lamellas; fastening eyelets. Installation Recommendations: installation is carried out at temperatures from -50 °С to +60 °С; the installation site is pre-cleaned; the attachment points should not have cracks, and the thickness of the hard layer should allow the installation of a fixing metal dowel; the gap between the sleeve and the channel wall must be less than 5 mm; fixing eyes are bent in the plane of the base of the coupling; the coupling is installed in the channel, after which the points of attachment of the lugs to the enclosing structure are marked with a marker. Diameter: DN 132.
Photo	OGNEZA PM(V)-T Fire prevention ventilation sleeve, d 140 (price on request) [Code number: 1r0022] Details	1r0022
Application purpose: For installation with plastic ventilation ducts For residential buildings (including apartment buildings), hospitals, hostels, hotels, shopping centers, airports and train stations, industrial enterprises Characteristics: fire resistance not less than EI 180; suitable for walls with an additional partition and an air gap between them. Compound: perforated fixed sleeve body; metal case of the movable sleeve (painted with polymer powder paint); thermally expanding material "OGNEZA-TRM"; movable sleeve seal; lamellas; fastening eyelets. Installation Recommendations: installation is carried out at temperatures from -50 °С to +60 °С; the installation site is pre-cleaned; the attachment points should not have cracks, and the thickness of the hard layer should allow the installation of a fixing metal dowel; the gap between the sleeve and the channel wall must be less than 5 mm; fixing eyes are bent in the plane of the base of the coupling; the coupling is installed in the channel, after which the points of attachment of the lugs to the enclosing structure are marked with a marker. Diameter: DN 140.
Photo	OGNEZA PM(V)-T Fire prevention ventilation sleeve, d 150 (price on request) [Code number: 1r0023] Details	1r0023
Application purpose: For installation with plastic ventilation ducts For residential buildings (including apartment buildings), hospitals, hostels, hotels, shopping centers, airports and train stations, industrial enterprises Characteristics: fire resistance not less than EI 180; suitable for walls with an additional partition and an air gap between them. Compound: perforated fixed sleeve body; metal case of the movable sleeve (painted with polymer powder paint); thermally expanding material "OGNEZA-TRM"; movable sleeve seal; lamellas; fastening eyelets. Installation Recommendations: installation is carried out at temperatures from -50 °С to +60 °С; the installation site is pre-cleaned; the attachment points should not have cracks, and the thickness of the hard layer should allow the installation of a fixing metal dowel; the gap between the sleeve and the channel wall must be less than 5 mm; fixing eyes are bent in the plane of the base of the coupling; the coupling is installed in the channel, after which the points of attachment of the lugs to the enclosing structure are marked with a marker. Diameter: DN 150.
Photo	OGNEZA PM(V)-T Fire prevention ventilation sleeve, d 160 (price on request) [Code number: 1r0024] Details	1r0024
Application purpose: For installation with plastic ventilation ducts For residential buildings (including apartment buildings), hospitals, hostels, hotels, shopping centers, airports and train stations, industrial enterprises Characteristics: fire resistance not less than EI 180; suitable for walls with an additional partition and an air gap between them. Compound: perforated fixed sleeve body; metal case of the movable sleeve (painted with polymer powder paint); thermally expanding material "OGNEZA-TRM"; movable sleeve seal; lamellas; fastening eyelets. Installation Recommendations: installation is carried out at temperatures from -50 °С to +60 °С; the installation site is pre-cleaned; the attachment points should not have cracks, and the thickness of the hard layer should allow the installation of a fixing metal dowel; the gap between the sleeve and the channel wall must be less than 5 mm; fixing eyes are bent in the plane of the base of the coupling; the coupling is installed in the channel, after which the points of attachment of the lugs to the enclosing structure are marked with a marker. Diameter: DN 160.
Photo	OGNEZA PM(V)-T Fire prevention ventilation sleeve, d 170 (price on request) [Code number: 1r0025] Details	1r0025
Application purpose: For installation with plastic ventilation ducts For residential buildings (including apartment buildings), hospitals, hostels, hotels, shopping centers, airports and train stations, industrial enterprises Characteristics: fire resistance not less than EI 180; suitable for walls with an additional partition and an air gap between them. Compound: perforated fixed sleeve body; metal case of the movable sleeve (painted with polymer powder paint); thermally expanding material "OGNEZA-TRM"; movable sleeve seal; lamellas; fastening eyelets. Installation Recommendations: installation is carried out at temperatures from -50 °С to +60 °С; the installation site is pre-cleaned; the attachment points should not have cracks, and the thickness of the hard layer should allow the installation of a fixing metal dowel; the gap between the sleeve and the channel wall must be less than 5 mm; fixing eyes are bent in the plane of the base of the coupling; the coupling is installed in the channel, after which the points of attachment of the lugs to the enclosing structure are marked with a marker. Diameter: DN 170.
Photo	OGNEZA PM(V)-T Fire prevention ventilation sleeve, d 180 (price on request) [Code number: 1r0026] Details	1r0026
Application purpose: For installation with plastic ventilation ducts For residential buildings (including apartment buildings), hospitals, hostels, hotels, shopping centers, airports and train stations, industrial enterprises Characteristics: fire resistance not less than EI 180; suitable for walls with an additional partition and an air gap between them. Compound: perforated fixed sleeve body; metal case of the movable sleeve (painted with polymer powder paint); thermally expanding material "OGNEZA-TRM"; movable sleeve seal; lamellas; fastening eyelets. Installation Recommendations: installation is carried out at temperatures from -50 °С to +60 °С; the installation site is pre-cleaned; the attachment points should not have cracks, and the thickness of the hard layer should allow the installation of a fixing metal dowel; the gap between the sleeve and the channel wall must be less than 5 mm; fixing eyes are bent in the plane of the base of the coupling; the coupling is installed in the channel, after which the points of attachment of the lugs to the enclosing structure are marked with a marker. Diameter: DN 180.