Logo
Ru| En

Domestic sewerage

Home→ Catalog→ Sewerage→ Domestic sewerage

The internal sewerage system is one of the most important engineering systems of the building, and for its installation it is necessary to use high-quality pipes and fittings.

We supply products only from brands that have been proven over the years, producing pipes and fittings made of PVC, PP, cast iron and steel. All products meet all sanitary requirements, are made only from high-quality raw materials and are distinguished by reliability and durability.

This section presents not only pipes with fittings, but also additional equipment needed for sewerage installation:

  • plumbing siphons;
  • traps;
  • shower trays;
  • pipes for toilet bowls;
  • non-return valves;
  • air valves.
Photo Name Article Price
Photo Draft
Photo [DISCONTINUED. REPLACEMENT: HL 090.5E] - Hutterer & Lechner siphon PRIMUS, flat, complete for HL 90Pr [Code number: HL 2090] (Russia) Draft [DISCONTINUED. REPLACEMENT: HL 090.5E] - Hutterer & Lechner siphon PRIMUS, flat, complete for HL 90Pr [Code number: HL 2090] (Russia)
[DISCONTINUED. REPLACEMENT: HL 090.5E] - Hutterer & Lechner siphon PRIMUS, flat, complete for HL 90Pr [Code number: HL 2090] (Russia)
Details 		HL 2090 2 207 rub

HL 2090 - it is special "dry" siphon "Primus" with capacity of 0,43 l/s. It is made of polypropylene. Depth of trap seal is 30 mm. The device protects premises against sewer smells when drying trap seal. For drains HL 90(Pr) series.

Capacity Material Weight
l/s   gr
0,43 polypropylene 85
Photo Draft
Photo [DISCONTINUED. REPLACEMENT: HL 090.5EKK] - Hutterer & Lechner siphon PRIMUS, flat, for system "Klick-Klack" [Code number: HL 2090KK] (Russia) Draft [DISCONTINUED. REPLACEMENT: HL 090.5EKK] - Hutterer & Lechner siphon PRIMUS, flat, for system "Klick-Klack" [Code number: HL 2090KK] (Russia)
[DISCONTINUED. REPLACEMENT: HL 090.5EKK] - Hutterer & Lechner siphon PRIMUS, flat, for system "Klick-Klack" [Code number: HL 2090KK] (Russia)
Details 		HL 2090KK 2 207 rub

HL 2090KK - it is special "dry" siphon "Primus" with capacity of 0,43 l/s. It is made of polypropylene. Depth of trap seal is 30 mm. The siphon is used for improving the drains HL 90(Pr-3000) series. The device protects premises against sewer smells when drying trap seal.

Capacity Material Weight
l/s   gr
0,43 polypropylene 85
Photo
Photo [DISCONTINUED. REPLACEMENT: HL 3000FPrblue] - Hutterer & Lechner Extension system "Klick-Klack", with syfon PRIMUS and supporting frame, d 110mm [Code number: HL 3000FPr]
[DISCONTINUED. REPLACEMENT: HL 3000FPrblue] - Hutterer & Lechner Extension system "Klick-Klack", with syfon PRIMUS and supporting frame, d 110mm [Code number: HL 3000FPr]
Details 		HL 3000FPr 8 738 rub

Characteristics of HL sewage equipment:

  • Complies with ISO 9001
  • Safety for ecology and health
  • Products undergo laboratory testing
  • Durability
  • Attractive appearance

Детали:

  • Grating "Klick-Klack"
  • Syfon HL 2090KK
Diameter Weight
mm kg/pc
110 0,424
Photo Draft
Photo [DISCONTINUED. REPLACEMENT: HL 90Prblue] - Hutterer & Lechner Floor drain with flange, sifon PRIMUS, sifon height 30mm, extension 12-70mm, horizontal, DN40/50 [Code number: HL 90Pr] (Russia) Draft [DISCONTINUED. REPLACEMENT: HL 90Prblue] - Hutterer & Lechner Floor drain with flange, sifon PRIMUS, sifon height 30mm, extension 12-70mm, horizontal, DN40/50 [Code number: HL 90Pr] (Russia)
[DISCONTINUED. REPLACEMENT: HL 90Prblue] - Hutterer & Lechner Floor drain with flange, sifon PRIMUS, sifon height 30mm, extension 12-70mm, horizontal, DN40/50 [Code number: HL 90Pr] (Russia)
Details 		HL90Pr 6 224 rub

Application purpose:

  • For draining wastewater from floor level
  • For installation inside buildings

Characteristics:

  • release type: horizontal;
  • low mounting height - only 69 mm;
  • there is a "dry" siphon "Primus" (the height of the water seal is 30 mm);
  • it is possible to use in screeds with a thickness of not more than 100 mm;
  • the height of the extension element can be adjusted from 12 to 70 mm by cutting (it is also possible to use extensions);
  • the temperature of the drains should not exceed +85°C (it is possible to increase up to +100°C for a short period of time - no more than 200 liters);
  • suitable for installation with socket pipes made of PE and PP;
  • warranty: 1 year;
  • service life: 50 years.

Mounting example

Technical characteristics

Diameter Capacity Load Weight
DN, mm l/s kg gr
40/50 0,43 300 510
 
Material of spare parts
Grate Sifon Extension Grate frame Body
         
stainless steel polypropylene polypropylene polypropylene polyethylen
 
Packaging data (carton)
Height Width Depth Weight Volume
mm mm mm kg m3
155 225 295 0,848 0,010288125

Documentation

Download example of use: HL 90Pr Floor drain HL 90Pr
Photo Draft
Photo [DISCONTINUED. REPLACEMENT: HL 90Prblue-3000] - Hutterer & Lechner Floor drain with flange, sifon PRIMUS, sifon height 30mm, extension 12-70mm, horizontal, DN40/50 [Code number: HL 90Pr-3000] (Russia) Draft [DISCONTINUED. REPLACEMENT: HL 90Prblue-3000] - Hutterer & Lechner Floor drain with flange, sifon PRIMUS, sifon height 30mm, extension 12-70mm, horizontal, DN40/50 [Code number: HL 90Pr-3000] (Russia)
[DISCONTINUED. REPLACEMENT: HL 90Prblue-3000] - Hutterer & Lechner Floor drain with flange, sifon PRIMUS, sifon height 30mm, extension 12-70mm, horizontal, DN40/50 [Code number: HL 90Pr-3000] (Russia)
Details 		HL90Pr-3000 8 646 rub

Application purpose:

  • For draining wastewater from floor level
  • For installation inside buildings

Characteristics:

  • release type: horizontal;
  • low mounting height - only 69 mm;
  • there is a "dry" siphon "Primus";
  • if the diameter of the connected pipe is 40 mm, then the section of the outlet pipe with DN50 should be cut off;
  • the height of the extension can be adjusted from 10 to 80 mm by cutting (it is also possible to use extensions);
  • the temperature of the drains should not exceed +85°C (it is possible to increase up to +100°C for a short period of time - no more than 200 liters);
  • corresponds to GOST 23289-94;
  • warranty: 1 year;
  • service life: 50 years.

Produced in Russia.

Mounting example

Technical characteristics

Diameter Capacity Load Weight
DN, mm l/s kg gr
40/50 0,43 300 708
 
Material of spare parts
Grate Sifon Extension Grate frame Body
         
stainless steel polypropylene polypropylene stainless steel polyethylen
 
Packaging data (carton)
Height Width Depth Weight Volume
mm mm mm kg m3
155 225 295 0,9 0,010288125

Documentation

Download example of use: HL 90Pr-3000 Floor drain HL 90Pr-3000
Photo Draft
Photo [DISCONTINUED. REPLACEMENT: HL 90Prblue-3020] - Hutterer & Lechner Floor drain with trap Primus and extension with tilable frame, horizontal, DN40/50 [Code number: HL 90Pr-3020] (Russia) Draft [DISCONTINUED. REPLACEMENT: HL 90Prblue-3020] - Hutterer & Lechner Floor drain with trap Primus and extension with tilable frame, horizontal, DN40/50 [Code number: HL 90Pr-3020] (Russia)
[DISCONTINUED. REPLACEMENT: HL 90Prblue-3020] - Hutterer & Lechner Floor drain with trap Primus and extension with tilable frame, horizontal, DN40/50 [Code number: HL 90Pr-3020] (Russia)
Details 		HL 90Pr-3020 16 603 rub

Floor drain HL 90Pr-3020 is designed for installation inside buildings. It has horizontal outlet DN40/50. The drain has mould for tiles 112х112 mm - it is made of stainless steel and polypropylene. Size of grate frame is 132х132 mm. Capacity is 0,43 l/s. The drain can endure load up to 300 kg. Also the drain is equipped with a siphon PRIMUS.

Diameter Capacity Load Weight
DN, mm l/s kg gr
40/50 0,43 300 570
 
Material of spare parts
Mould for tiles Extension Trap cartridge Grate frame Body
         
stainless steel polypropylene polypropylene stainless steel polyethene

Download example of use: HL 90Pr-3020 Floor drain HL 90Pr-3020
Photo Draft
Photo Blank end PAM-GLOBAL® S Photo Blank end PAM-GLOBAL® S Photo Blank end PAM-GLOBAL® S Draft Blank end PAM-GLOBAL® S
1 2 3
Blank end PAM-GLOBAL® S
Details
Nominal internal diameter L Weight Code number
DN mm kg  
50 30 0,3 155747
70* 35 0,4 155776
80 35 0,5 176700
100 40 0,8 155809
125 45 1,2 155865
150 50 1,7 155898
200 60 3,2 155928
250 70 5,9 155945
300 80 10,0 155957

 * Diameter 80 gradually replace diameter 70
Photo Draft
Photo 45˚ single branch PAM-GLOBAL® S Photo 45˚ single branch PAM-GLOBAL® S Draft 45˚ single branch PAM-GLOBAL® S
1 2
45˚ single branch PAM-GLOBAL® S
Details
Nominal internal diameter X1 X2 X3 L Weight Code number
DN         kg  
50x50 50 135 135 185 1,4 155769
70x50* 40 150 150 190 1,5 155789
80x50 45 135 135 180 1,6 173786
70x70* 55 160 160 215 2,1 155806
80x80 60 155 155 215 2,2 173787
100x50 35 165 165 200 2,4 155828
100x70* 50 185 185 235 2,7 155831
100x80 50 170 170 220 2,8 173788
100x100 70 205 205 275 3,8 155857
125x50 20 185 185 205 3,2 155877
125x70* 40 200 200 240 4,1 155879
125x80 45 200 195 240 4,2 176716
125x100 60 220 220 280 5,6 155882
125x125 80 240 240 320 5,7 155895
150x70* 30 215 215 245 5,2 155910
150x80 50 220 220 255 5,9 176733
150x100 55 240 240 295 6,1 155912
150x125 70 255 255 325 7,0 155914
150x150 90 265 265 355 8,8 155926
200x70* 15 240 240 255 7,2 155934
200x80 20 240 240 260 7,3 176734
200x100 40 265 265 305 8,6 155935
200x125 55 280 280 335 11,4 155936
200x150 75 300 300 375 11,6 155937
200x200 115 340 340 455 16,8 155944
250x100 15 315 315 330 13,6 155949
250x125 35 335 335 370 16,0 155950
250x150 55 350 350 405 17,3 155951
250x200 90 390 390 480 22,4 155952
250x250 130 430 430 560 29,0 155956
300x100 5 345 345 350 19,3 155961
300x125 15 360 360 375 21,0 155962
300x150 35 380 380 415 28,0 155963
300x200 70 440 415 485 28,1 155964
300x250 115 465 465 580 37,6 155965
300x300 115 505 505 660 46,3 155968
400x300 105 555 555 660 56,4 157178
400x400 190 645 645 835 98 157185

Dimensions are presented in mm

* Diameter 80 gradually replace diameter 70
Photo Draft
Photo Eccentric reducer PAM-GLOBAL® S Photo Eccentric reducer PAM-GLOBAL® S Photo Eccentric reducer PAM-GLOBAL® S Draft Eccentric reducer PAM-GLOBAL® S
1 2 3
Eccentric reducer PAM-GLOBAL® S
Details
Nominal internal diameter A L t1 t2 Weight Code number
DN         kg  
70x50 10 75 35 30 0,5 155763
80x50* 13 80 35 30 0,7 176727
100x50 25 80 40 30 0,8 155764
100x70* 16 85 40 35 0,9 155801
100x80 14 90 40 35 1,0 176728
125x50 38,5 85 45 30 1,5 155765
125x70* 28,5 90 45 35 1,3 155802
125x80 26 95 45 35 1,3 176730
125x100 12,5 95 45 40 1,6 155842
150x50 51 95 50 30 1,9 155766
150x70* 41 100 50 35 2,0 155803
150x80 39 100 80 35 2,0 176732
150x100 25 105 50 40 2,0 155843
150x125 12,5 110 50 45 2,0 155892
200x75 64 115 43 72 3,8 156532
200x100 50 115 60 40 3,6 155844
200x125 37,5 120 60 45 3,8 155893
200x150 25 125 60 50 4,3 155922
250x100 82 125 45 82 6 156690
250x150 57 140 70 50 6,8 155923
250x200 32 145 70 60 7,0 155942
300x100 108 140 45 95 9,4 156692
300x150 83 150 80 50 10,7 155924
300x200 58 160 80 60 11,4 155943
300x250 26 170 80 70 12,4 155955
400x300 52 200 100 100 19,6 157163

Dimensions are presented in mm

*Diameter 80 gradually replace diameter 70
Photo Draft
Photo Blank end PAM-GLOBAL® Plus Draft Blank end PAM-GLOBAL® Plus
Blank end PAM-GLOBAL® Plus
Details
Nominal internal diameter L Weight Code number
DN mm kg  
50 30 0,25 155197
80 35 0,45 176783
100 40 0,80 155231
125 45 1,20 155257
150 50 1,70 155273
200 60 3,20 155287
250 70 5,90 155477
300 80 10 155494
Photo Draft
Photo Bend PAM-GLOBAL® Plus 15˚ Draft Bend PAM-GLOBAL® Plus 15˚
Bend PAM-GLOBAL® Plus 15˚
Details
Nominal internal diameter X Weight Code number
DN mm kg  
50 40 0,47 155202
80 45 0,68 176781
100 50 1,15 155237
125 60 1,77 155262
150 65 2,40 155278
200 80 4,40 173774
400 100 21,40 on order
Photo Draft
Photo PAM-GLOBAL® Plus Double branch 45° Draft PAM-GLOBAL® Plus Double branch 45°
PAM-GLOBAL® Plus Double branch 45°
Details
Nominal internal diameter X1 X2 X3 L Weight Code number
DN mm mm mm mm kg  
100x100x100 70 190 190 260 4,6 155384
125x125x125 65 240 240 305 7,9 155411
150x150x150 90 265 265 355 11,8 155445
200x200x200 115 340 340 455 18,4 155473
Photo Draft
Photo 45˚ single branch PAM-GLOBAL® Plus Draft 45˚ single branch PAM-GLOBAL® Plus
45˚ single branch PAM-GLOBAL® Plus
Details
Nominal internal diameter X1 X2 X3 L Weight Code number
DN         kg  
50x50 50 135 135 185 1,35 155213
80x50 45 135 135 180 1,60 176740
80x80 60 155 155 215 2,20 176742
100x50 35 165 165 200 2,40 155245
100x80 50 170 170 220 2,75 176743
100x100 70 205 205 275 3,8 155255
125x50 20 185 185 205 3,24 155264
125x80 51 189 189 240 4,20 176784
125x100 60 220 220 280 5,60 155267
125x125 80 240 240 320 5,70 155271
150x80 50 220 220 255 5,30 176785
150x100 55 240 240 295 6,12 155281
150x125 70 255 255 325 7,00 155282
150x150 90 265 265 355 8,75 155285
200x80 20 240 240 260 7,34 176786
200x100 40 265 265 305 8,64 155291
200x125 55 280 280 335 11,60 155292
200x150 75 300 300 375 11,43 155293
200x200 115 340 340 455 16,78 155295
250x150 55 350 350 405 22 208730
250x200 90 390 390 480 22,4 155483
250x250 130 430 430 580 29 155490
300x250 115 465 465 580 37,6 155500
300x300 155 505 505 660 46,3 155507
400x300 105 555 555 660 56,4 155510
400x400 190 645 645 835 98 on order

Dimensions are presented in mm
Photo Draft
Photo PAM-GLOBAL® S Iron flange fitting for roof penetration Draft PAM-GLOBAL® S Iron flange fitting for roof penetration
PAM-GLOBAL® S Iron flange fitting for roof penetration
Details

To reliable the installation ventilation pipes through the roof, you should use the specially designed element - PAM-GLOBAL® S Iron flange fitting for roof penetration.

Profile seal is inserted between the pipe and flange fitting for roof penetration so that the flange fitting is waterproof. The flange fitting is produced with sealing ring made of EPDM or NBR.

The first flange fitting is installed under the roof insulation layer, and the second flange fitting - above the roof insulation layer. Accordingly the first flange fitting "clamps" еру vapor barrier and the second flange fitting "clamps" waterproofing layer, be it polymer or bituminous.

Nominal internal diameter D d Lk Ø h Weight Code number
DN mm mm mm mm kg  
80 286 135 215 60 6,1 205922
100 324 158 246 60 6,6 205924
125 349 188 271 60 7,5 205925
Photo Draft
Photo PAM-GLOBAL® S Double branch 45° Draft PAM-GLOBAL® S Double branch 45°
PAM-GLOBAL® S Double branch 45°
Details
Nominal internal diameter X1 X2 X3 L Weight Code number
DN mm mm mm mm kg  
100x100x100 70 190 190 260 5,3 156709
125x100x100 60 220 220 280 6,3 257729
125x125x125 75 230 230 305 7,5 156817
150x100x100 55 225 225 280 7,3 156865
150x150x150 90 270 270 360 12,0 156936
200x200x200 115 340 340 455 18,4 157034
Photo Draft
Photo Round access pipe PAM-GLOBAL® Plus Photo Round access pipe PAM-GLOBAL® Plus Draft Round access pipe PAM-GLOBAL® Plus
Round access pipe PAM-GLOBAL® Plus
Details
Nominal internal diameter H D1 D2 L Weight Code number
DN         kg  
50 64 53 105 190 2,3 179348
70           179349
80 73 78 134 220 3,2 179648
100 84 104 159 260 5,0 179350

Dimensions are presented in mm
Photo Draft
Photo Round access pipe PAM-GLOBAL® S Photo Round access pipe PAM-GLOBAL® S Photo Round access pipe PAM-GLOBAL® S Draft Round access pipe PAM-GLOBAL® S
1 2
Round access pipe PAM-GLOBAL® S
Details
Nominal internal diameter H D1 D2 L Weight Code number
DN         kg  
50 64 53 105 190 2,3 179191
70* 69 73 125 210 2,9 155799
80 73 73 125 210 3,2 179647
100 84 104 159 260 5,0 179192
125   152 202 280 7,0 280010
150   180 243 320 9,8 280012
200   180 243 360 12,9 280013
250   180 274 380 18,7 280014
300   180 326 400 25,0 280015

Dimensions are presented in mm

*Diameter 80 gradually replace diameter 70
Photo Draft
Photo Branch trap PAM-GLOBAL® S Photo Branch trap PAM-GLOBAL® S Draft Branch trap PAM-GLOBAL® S
1 2
Branch trap PAM-GLOBAL® S
Details

Branch traps PAM-GLOBAL® S with nominal diameter of 50-200 mm can be mounted on a vertical and horizontal pipeline (the vertical pipeline must be fixed). The branch trap is installed vertically to maintain a sufficient depth of the water seal. The branch trap can be installed both to pipeline-collector and to pressure riser. On the branch trap body are printed arrows which are indicating the direction of flow.

Nominal internal diameter I h X1 X2 X3 X4 W Weight Code number
DN               kg  
50 190 250 182 68 122 68 60 2,9 156420
70* 265 293 200 93 172 93 60 5,0 156521
80 265 293 200 93 172 93 60 5,9 176714
100 325 392 282 110 215 110 100 9,5 156668
125 390 446 316 130 260 130 100 14,4 156801
150 470 493 348 145 325 145 100 21,8 156912
200 600 600 420 180 400 200 100 38,4 157018

Dimensions are presented in mm

*Diameter 80 gradually replace diameter 70

 

Installation examples:
Photo Draft
Photo Wavin air-valve, d 75, 110 [Code number: 4065752 / 24399880] Draft Wavin air-valve, d 75, 110 [Code number: 4065752 / 24399880]
Wavin air-valve, d 75, 110 [Code number: 4065752 / 24399880]
Details 		4065752

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For domestic drainage systems

Description

Wavin Optima air-valve is suitable for the installation of domestic sewerage systems. It is installed for admission air to the sewerage system, so that vacuum in systems without a ventilation outlet to the street do not prevent.

It is not recommended to use the air-valve in the low temperature range, as the valve is not working when the condensate cools in the internal cavity.

Technical characteristics

Material: polypropylene (PP).

Color: white.

Dy F H1 H2
mm mm mm mm
75/110 125 90 135
Photo
Photo Hutterer & Lechner Tubular trap with appliance hose connector and ball-joint outlet, DN40x1 1/2' [Code number: HL 100/40]
Hutterer & Lechner Tubular trap with appliance hose connector and ball-joint outlet, DN40x1 1/2' [Code number: HL 100/40]
Details 		HL 100/40 2 260 rub

Tubular trap HL 100/40 DN 40 horizontal is made of polypropylene. The device is equipped with ball-joint outlet and appliance hose connector 6/4". In addition, the trap can connect to the washing machine or dishwasher, which uses input 3/4".

Diameter Material Weight
DN, mm   gr
40 polypropylene 260

© Inrusstrade.ru 1999-2024. "Inrusstrade" Ltd. Copying and quoting is prohibited