HL drains

Application purpose:

• For draining rain and melt water into the sewer system from balconies and terraces

Characteristics:

• release type: horizontal;
• the ladder is equipped with a "plate" for picking up waterproofing;
• there is an extension with a subframe (size 132x132 mm) made of stainless steel;
• it is possible to glue ceramic tiles - for this there is an insert measuring 112x112 mm;
• the temperature of the drains should not exceed +85°C (it is possible to increase up to +100°C for a short period of time - no more than 200 liters);
• suitable for installation with socket pipes made of PVC and PP;
• the slope to the wall must be at least 2°;
• service life: 50 years.

Equipment:

• Housing made of PE
• Extension element made of polypropylene
• Extension subframe made of V4A stainless steel
• O-ring (rubber)
• Mechanical odor lock (made of PP)
• Insert for ceramic tiles (stainless steel V4A)

Technical characteristics

Documentation

Download example of use: Balcony and terrace drain HL 90.2-3020

Floor drain HL 90.2G has grate 137*137 mm - it is made of cast iron. Size of grate frame is 150*150 mm. Capacity is 0,50 l/s. The drain can endure load up to 300 kg. Also the drain is equipped with a frost- and drought-proof flap seal.

Balcony- and terrace drain HL 90-3000 is equipped with a strainer. The drain has grate 115*115 mm - it is made of stainless steel. Size of grate frame is 121*121. Capacity is 0,56 l/s. The drain can endure load up to 300 kg.

Balcony and terrace drain HL 90-3020 comes with pre-installed lot cover. The drain is equipped with grate 112 x 112 mm and grate frame 132 x 132 mm. Also the drain has flange, horizontal outlet DN40/50 and extension. Capacity is 0,56 l/s.

Download example of use: Balcony and terrace drain HL 90-3020

Floor drain HL 90G has grate 137*137 mm - it is made of cast iron. Size of grate frame is 150*150 mm. The drain can endure load up to 1500 kg. Also the drain is equipped with a strainer. Capacity is 0,56 l/s. The drain has horizontal outlet DN40/50.

Floor drain HL 90H is used for derivation of meltwater and rainwater to drainage system. The drain has grate 115*115 mm - it is made of stainless steel. Size of grate frame is 123*123 mm. The drain can endure load up to 300 kg. Also the drain is equipped  with a strainer.

Balcony- and terrace drain HL 90H.2 is equipped with a frost- and drought-proof flap seal. It ia installed on balconies and terraces. The drain has horizontal outlet DN40/50. Capacity is 0,50 l/s. The drain can endure load up to 300 kg.

Download data sheet: Balcony and terrace drain HL 90H.2

Floor drain HL 90H.2-3000 is used for derivation of meltwater and rainwater to drainage system. The drain has grate 115*115 mm - it is made of stainless steel. Size of grate frame is 121*121 mm. The drain can endure load up to 300 kg. Also the drain is equipped with a frost- and drought-proof flap seal.

Floor drain HL 90H.2-3020 has horizontal outlet DN40/50. The drain has mould for tiles 112х112 mm - it is made of stainless steel. Size of grate frame is 132х132 mm. The drain can endure load up to 300 kg. Also the drain is equipped with a frost- and drought-proof flap seal. Weight of the drain is 1766 gr. Capacity is 0,5 l/s.

Floor drain HL 90H-3000 has horizontal outlet DN40/50. The drain has grate 115*115 mm - it is made of stainless steel. Size of grate frame is 121*121 mm. Capacity is 0,56 l/s. Also the drain is equipped with a strainer.

Floor drain HL 90H-3020 is installed on balconies and terraces. The drain has mould for tiles 115*115 mm - it is made of stainless steel and polypropylene. Size of grate frame is 132х132 mm. Capacity is 0,56 l/s. The drain can endure load up to 300 kg. Also the drain is equipped with a strainer.

Floor drain HL 90HPr is designed for installation inside buildings. It has horizontal outlet DN40/50. The drain has grate 115*115 mm - it is made of stainless steel. Size of grate frame is 123*123 mm. Capacity is 0,43 l/s. The drain can endure load up to 300 kg. Also the drain is equipped with bitumen membrane d 420 mm and trap seal PRIMUS.

Download data sheet: Floor drain 90HPr

Floor drain HL 90HPr-3000 is designed for installation inside buildings. It has horizontal outlet DN40/50. The drain has grate 115*115 mm - it is made of stainless steel. Size of grate frame is 121*121 mm. Capacity is 0,43 l/s. The drain can endure load up to 300 kg. Also the drain is equipped with a siphon PRIMUS and bitumen membrane d 420 mm.

Floor drain HL 90HPr-3020 is designed for installation inside buildings. It has horizontal outlet DN40/50. The drain has mould for tiles 112х112 mm - it is made of stainless steel and polypropylene. Size of grate frame is 132х132 mm. Capacity is 0,43 l/s. The drain can endure load up to 300 kg. Also the drain is equipped with bitumen membrane d 420 mm and trap seal PRIMUS. Height of extension can be adjust.

Floor drain HL 90HPr-3127 is designed for installation inside buildings. It has horizontal outlet DN40/50. The drain has grate 115*115 mm "Primus Design" - it is made of stainless steel. Size of grate frame is 121*121 mm. Capacity is 0,43 l/s. The drain can endure load up to 300 kg. Also the drain is equipped with bitumen membrane d 420 mm and siphon PRIMUS.

Application area:

• For drains

Characteristics:

• Material: PE
• Dimension: DN40/50
• installation height: 57 mm

Weight: 0,218 kg