HL drains

Plug-in drain Primus HL 73Pr is designed for installation indoors without waterproofing. Service life of the drain is not less than 50 years. Temperature of waste water should not exceed  +85 °C and for a short period of time it can rise up to 100 °C. The drain is equipped with "Primus" trap, stainless steel frame 121 x 121 mm, system "Klick-Klack" and grate 115 x 115 mm. Capacity is 0,46 l/s. The drain can endure load up to 300 kg.

Documentation

Download example of product installation:  Floor drain HL 73Pr

Basement drain HL 77 is installed in the basements or technical areas. It connects topipes with diameter of 110 mm. The drain is equipped with  removable triple anti-flood valve (2 x automatically, 1 x manual blocking), 2-piece plastic grate 180 x 250 mm and bucket. Capacity is 1,58 l/s. Depth of trap seal is 60 mm. Outlet is horizontal.

Download data sheet: Basement drain HL 77

Basement drain HL 77.1 is installed in the basements or technical areas. Diameter of outlet is 110 mm and diameter of inlet is 50 mm. The drain is equipped with  removable triple anti-flood valve (2 x automatically, 1 x manual blocking), 2-piece plastic grate 180 x 250 mm and bucket. Capacity is 1,58 l/s. Depth of trap seal is 60 mm.

Download data sheet: Basement drain HL 77.1

Floor drain HL 80.1 has ball-joint outlet (for horizontal and vertical use). Diameter of the drain is 50/75 mm, its weight is 625 grams.Capacity is 0.5 l/s, device can endure load up to 300 kg. The floor drain have a grate 115*115 mm and plastic grate frame 123*123 mm. Depth of trap seal is 50 mm. The floor drain disposes effluents from the floor level and waterproofing, and temperature of effluents should be below 85 °C. Height of the grate frame can be adjusted from the smallest to largest.

Documentation

Download data sheet:  Floor drain HL 80.1

Download example of product installation:  Floor drain HL 80.1

Floor drain HL 80.1-3000 is designed for installation inside buildings. It has ball-joint outlet DN50/75. The drain has grate 115*115 mm - it is made of stainless steel. Size of grate frame is 123*123 mm. Capacity is 0,5 l/s. The drain can endure load up to 300 kg. Also the drain is equipped with bitumen membrane trap seal. Operating temperature is +85°С, and it can increase up to.+100°С for short time period.

Documentation

Download data sheet: Floor drain HL 80.1-3000

Application area:

• For indoor use

Characteristics:

• Material: PP
• Dimension: DN50/75
• capacity: 0,5 l/sec
• visual parts: brass
• load class: 300 kg

Weight: 0,625 kg

Floor drain HL 80.1C has ball-joint outlet (for horizontal and vertical use). Diameter of the drain is 50/75 mm, its weight is 6100 grams.Capacity is 0.5 l/s, device can endure load up to 300 kg. The floor drain is equipped with a grate 115*115 mm and plastic grate frame 123*123 mm, steel mesh and CeraDrain collar with polymer concrete collar. Depth of trap seal is 50 mm.

Documentation

Download example of product installation:  Floor drain HL 80.1C

Floor drain HL 80.1H has ball-joint outlet (for horizontal and vertical use) and bitumen membrane d 420 mm. Diameter of the drain is 50/75 mm, its weight is 1195 grams.Capacity is 0.5 l/s, device can endure load up to 300 kg. The floor drain is equipped with a grate 115*115 mm, grate frame 123*123 mm and trap seal.

Documentation

Download example of product installation:  Floor drain HL 80.1H

Floor drain HL 80.1H-3000 is designed for installation inside buildings. It has ball-joint outlet DN50/75. The drain has grate 115*115 mm - it is made of stainless steel. Size of grate frame is 123*123 mm. Capacity is 0,5 l/s. The drain can endure load up to 300 kg. Also the drain is equipped with extension KLICK-KLACK. Height of trap seal is 50 mm.

Floor drain HL 80.1HR has ball-joint outlet (for horizontal and vertical use) and bitumen membrane d 420 mm. Diameter of the drain is 50/75 mm, its weight is 1220 grams.Capacity is 0.5 l/s, device can endure load up to 300 kg. The floor drain is equipped with a plate d 112 mm, cut-to-size plastic extension 20 - 73 mm with frame round d 131 mm and trap seal.

Documentation

Download example of product installation:  Floor drain HL 80.1HR

Floor drain HL 80.1R has ball-joint outlet (for horizontal and vertical use) and flange. Diameter of the drain is 50/75 mm, its weight is 650 grams.Capacity is 0.5 l/s, device can endure load up to 300 kg. The floor drain is equipped with a plate d 112 mm, cut-to-size extension 20 - 73 mm with frame round d 133 mm and trap seal.

Documentation

Download example of product installation:  Floor drain HL 80.1R

Floor drain HL 80.2 has ball-joint outlet (for horizontal and vertical use) and flange. Diameter of the drain is 50/75 mm, its weight is 535 grams.Capacity is 0.5 l/s. The floor drain is equipped with a grate frame 12 - 73 mm / 100 x 100 mm, coverplate 94 x 94 mm and stand pipe 100 mm.

Documentation

Download example of product installation:  Floor drain HL 80.2

Floor drain HL 80.2H has ball-joint outlet (for horizontal and vertical use) and bitumen membrane d 420 mm. Diameter of the drain is 50/75 mm, its weight is 1250 grams.Capacity is 0.5 l/s. The floor drain is equipped with a cut-to-size grate frame 12 - 73 mm / 100 x 100 mm, coverplate 94 x 94 mm and stand pipe 100 mm.

Documentation

Download example of product installation:  Floor drain HL 80.2H

Application area:

• For floor draining

Characteristics:

• Material: PP/PE
• Dimension: DN50/75
• installation height: 91 mm

Weight: 3,928 kg

Balcony and terrace drain HL 80CR is equipped with grate d 112 mm and grate frame d 133 mm. Also the drain has polymer concrete collar, steel mesh, ball-joint outlet DN50/75 and frost- and drought-proof flap seal. Capacity is 0,80 l/s.

Documentation

Download example of product installation:  Balcony and terrace drain HL 80CR