Logo
Ru| En

Geberit press fittings

Home→ Catalog→ Gas supply systems→ Fittings for gas supply→ Geberit press fittings

The Geberit Mapress pipeline system is universal and it can be used for installing a pipeline for gas supply.

Geberit press fittings for gas pipelines are made of stainless steel, they have all the necessary permits and can be used to supply natural gas, liquefied gas and even some types of technical gas.

Press fittings for gas supply can have sizes from 15 to 108 mm.

The are installed in the same way as fittings for heating and water supply, that is, by pressing. There is pressing indicator at the fittings, which provide the reliability of the pressing - all the not pressed connections are immediately identified.

All Geberit fittings for gas pipelines have a bright yellow marking. They are equipped with a sealing ring of hydrogenated butadiene-nitrile rubber (HNBR).

Prices for Geberit stainless steel fittings can be found in the catalog on the links below:

Photo Name Article Price
Photo Draft
Photo Geberit Mapress Stainless Steel elbow tap connector 90° for gas metres, gas, d 22, L 6,5 [Code number: 91099] Draft Geberit Mapress Stainless Steel elbow tap connector 90° for gas metres, gas, d 22, L 6,5 [Code number: 91099]
Geberit Mapress Stainless Steel elbow tap connector 90° for gas metres, gas, d 22, L 6,5 [Code number: 91099]
Details 		91099

ATTENTION! This product is temporarily unavailable for order!

Application purpose:

  • For gas installations with natural gases (NG) and liquefied gases (LPG)
  • For connection single-pipe or two-pipe gas metre
  • For mounting plate gas metre connection

Characteristics:

  • Marked in yellow
  • Leaky if unpressed

Scope of delivery:

  • Seal ring HNBR yellow

Technical data

Material: Stainless Cr-Ni-Mo steel 1.4401 BS 316

Temperature range during operation: -20 - +70 °C

Angle: 90°

Download the installation instructions: Installation of Geberit Mapress Geberit Mapress system

d Rp L L1 l l1 Z
mm '' cm cm cm cm cm
22 1 6,5 5,8 3 2,2 3,7
Photo Draft
Photo Geberit Mapress Stainless Steel elbow tap connector 90° for gas metres, gas, d 28, L 6,5 [Code number: 91100 (G)] Draft Geberit Mapress Stainless Steel elbow tap connector 90° for gas metres, gas, d 28, L 6,5 [Code number: 91100 (G)]
Geberit Mapress Stainless Steel elbow tap connector 90° for gas metres, gas, d 28, L 6,5 [Code number: 91100 (G)]
Details 		91100 (G)

ATTENTION! This product is temporarily unavailable for order!

Application purpose:

  • For gas installations with natural gases (NG) and liquefied gases (LPG)
  • For connection single-pipe or two-pipe gas metre
  • For mounting plate gas metre connection

Characteristics:

  • Marked in yellow
  • Leaky if unpressed

Scope of delivery:

  • Seal ring HNBR yellow

Material: Stainless Cr-Ni-Mo steel 1.4401 BS 316

Temperature range during operation: -20 - +70 °C

Angle: 90°

Download the installation instructions: Installation of Geberit Mapress Geberit Mapress system

d Rp L L1 l l1 Z
mm '' cm cm cm cm cm
28 1 6,5 6,1 3 2,2 4
Photo
Photo Geberit Mapress seal ring FKM, white, d 15 [Code number: 91152 (G)]
Geberit Mapress seal ring FKM, white, d 15 [Code number: 91152 (G)]
Details 		91152 (G)

ATTENTION! This product is temporarily unavailable for order!

DN Material Operating temperature
mm    
15 FKM 5-155 °C
Photo
Photo Geberit Mapress seal ring FKM, white, d 18 [Code number: 91153]
Geberit Mapress seal ring FKM, white, d 18 [Code number: 91153]
Details 		91153

ATTENTION! This product is temporarily unavailable for order!

DN Material Operating temperature
mm    
18 FKM 5-155 °C
Photo
Photo Geberit Mapress seal ring FKM, white, d 22 [Code number: 91154]
Geberit Mapress seal ring FKM, white, d 22 [Code number: 91154]
Details 		91154

ATTENTION! This product is temporarily unavailable for order!

DN Material Operating temperature
mm    
22 FKM 5-155 °C
Photo
Photo Geberit Mapress seal ring FKM, white, d 28 [Code number: 91155]
Geberit Mapress seal ring FKM, white, d 28 [Code number: 91155]
Details 		91155

ATTENTION! This product is temporarily unavailable for order!

DN Material Operating temperature
mm    
28 FKM 5-155 °C
Photo
Photo Geberit Mapress seal ring FKM, white, d 35 [Code number: 91156]
Geberit Mapress seal ring FKM, white, d 35 [Code number: 91156]
Details 		91156

ATTENTION! This product is temporarily unavailable for order!

DN Material Operating temperature
mm    
35 FKM 5-155 °C
Photo
Photo Geberit Mapress seal ring FKM, white, d 42 [Code number: 91157]
Geberit Mapress seal ring FKM, white, d 42 [Code number: 91157]
Details 		91157

ATTENTION! This product is temporarily unavailable for order!

DN Material Operating temperature
mm    
42 FKM 5-155 °C
Photo
Photo Geberit Mapress seal ring FKM, white, d 54 [Code number: 91158]
Geberit Mapress seal ring FKM, white, d 54 [Code number: 91158]
Details 		91158

ATTENTION! This product is temporarily unavailable for order!

DN Material Operating temperature
mm    
54 FKM 5-155 °C
Photo
Photo Geberit Mapress Sealing ring, FKM, white, d 76.1mm [Code number: 91159]
Geberit Mapress Sealing ring, FKM, white, d 76.1mm [Code number: 91159]
Details 		91159

ATTENTION! This product is temporarily unavailable for order!
Photo
Photo Geberit Mapress Sealing ring, FKM, white, d 88.9mm [Code number: 91160]
Geberit Mapress Sealing ring, FKM, white, d 88.9mm [Code number: 91160]
Details 		91160

ATTENTION! This product is temporarily unavailable for order!
Photo
Photo Geberit Mapress Sealing ring, FKM, white, d 108mm [Code number: 91161]
Geberit Mapress Sealing ring, FKM, white, d 108mm [Code number: 91161]
Details 		91161

ATTENTION! This product is temporarily unavailable for order!
Photo Draft
Photo Geberit Mapress Ball valve with lever, with press sockets, stainless steel 1.4401, d 15 [Code number: 92100] Draft Geberit Mapress Ball valve with lever, with press sockets, stainless steel 1.4401, d 15 [Code number: 92100]
Geberit Mapress Ball valve with lever, with press sockets, stainless steel 1.4401, d 15 [Code number: 92100]
Details 		92100

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For heating water
  • For cooling water without antifreeze agent
  • For cooling water with antifreeze agent
  • For remote network heating water ≤ 120 °C
  • For service water
  • For treated water (application range according to Technical Information „Treated water“)
  • For grey and black water with pH value > 6.0
  • For extinguishing water (wet)
  • For compressed air (oil purity class 0–3)

Characteristics:

  • Spindle caulk made of PTFE
  • Section seal of flange and ball made of PTFE
  • Fulfils requirements in accordance with TA Air VDI 2440
  • Connecting flange for motor in accordance with EN ISO 5211 (only for d = 76.1–108 mm)
  • Length-adjustable actuator lever (only for d = 108 mm)
  • Pressing indicator
  • Leaky if unpressed
  • Seal ring made of CIIR, black
  • Pressing socket with transparent protection plug

Operating temperature: -20 - +120 °C

Material: CrNiMo steel 1.4401 (EN 10088)

Download the installation instructions: Installation of Geberit Mapress Geberit Mapress system

 

DN d k m L L1 L2 Z PN
mm mm mm mm cm cm cm cm bar
15 15 – – 12.2 5.5 10.5 4.1 40
Photo Draft
Photo Geberit Mapress Ball valve with lever, with press sockets, stainless steel 1.4401, d 18 [Code number: 92101] Draft Geberit Mapress Ball valve with lever, with press sockets, stainless steel 1.4401, d 18 [Code number: 92101]
Geberit Mapress Ball valve with lever, with press sockets, stainless steel 1.4401, d 18 [Code number: 92101]
Details 		92101

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For heating water
  • For cooling water without antifreeze agent
  • For cooling water with antifreeze agent
  • For remote network heating water ≤ 120 °C
  • For service water
  • For treated water (application range according to Technical Information „Treated water“)
  • For grey and black water with pH value > 6.0
  • For extinguishing water (wet)
  • For compressed air (oil purity class 0–3)

Characteristics:

  • Spindle caulk made of PTFE
  • Section seal of flange and ball made of PTFE
  • Fulfils requirements in accordance with TA Air VDI 2440
  • Connecting flange for motor in accordance with EN ISO 5211 (only for d = 76.1–108 mm)
  • Length-adjustable actuator lever (only for d = 108 mm)
  • Pressing indicator
  • Leaky if unpressed
  • Seal ring made of CIIR, black
  • Pressing socket with transparent protection plug

Operating temperature: -20 - +120 °C

Material: CrNiMo steel 1.4401 (EN 10088)

Download the installation instructions: Installation of Geberit Mapress Geberit Mapress system

DN d k m L L1 L2 Z PN
mm mm mm mm cm cm cm cm bar
15 18 – – 12.2 5.5 10.5 4.1 40
Photo Draft
Photo Geberit Mapress Ball valve with lever, with press sockets, stainless steel 1.4401, d 22 [Code number: 92102] Draft Geberit Mapress Ball valve with lever, with press sockets, stainless steel 1.4401, d 22 [Code number: 92102]
Geberit Mapress Ball valve with lever, with press sockets, stainless steel 1.4401, d 22 [Code number: 92102]
Details 		92102

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For heating water
  • For cooling water without antifreeze agent
  • For cooling water with antifreeze agent
  • For remote network heating water ≤ 120 °C
  • For service water
  • For treated water (application range according to Technical Information „Treated water“)
  • For grey and black water with pH value > 6.0
  • For extinguishing water (wet)
  • For compressed air (oil purity class 0–3)

Characteristics:

  • Spindle caulk made of PTFE
  • Section seal of flange and ball made of PTFE
  • Fulfils requirements in accordance with TA Air VDI 2440
  • Connecting flange for motor in accordance with EN ISO 5211 (only for d = 76.1–108 mm)
  • Length-adjustable actuator lever (only for d = 108 mm)
  • Pressing indicator
  • Leaky if unpressed
  • Seal ring made of CIIR, black
  • Pressing socket with transparent protection plug

Operating temperature: -20 - +120 °C

Material: CrNiMo steel 1.4401 (EN 10088)

Download the installation instructions: Installation of Geberit Mapress Geberit Mapress system

DN d k m L L1 L2 Z PN
mm mm mm mm cm cm cm cm bar
20 22 – – 13.3 6.1 10.5 4.6 40
Photo Draft
Photo Geberit Mapress Ball valve with lever, with press sockets, stainless steel 1.4401, d 28 [Code number: 92103] Draft Geberit Mapress Ball valve with lever, with press sockets, stainless steel 1.4401, d 28 [Code number: 92103]
Geberit Mapress Ball valve with lever, with press sockets, stainless steel 1.4401, d 28 [Code number: 92103]
Details 		92103

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For heating water
  • For cooling water without antifreeze agent
  • For cooling water with antifreeze agent
  • For remote network heating water ≤ 120 °C
  • For service water
  • For treated water (application range according to Technical Information „Treated water“)
  • For grey and black water with pH value > 6.0
  • For extinguishing water (wet)
  • For compressed air (oil purity class 0–3)

Characteristics:

  • Spindle caulk made of PTFE
  • Section seal of flange and ball made of PTFE
  • Fulfils requirements in accordance with TA Air VDI 2440
  • Connecting flange for motor in accordance with EN ISO 5211 (only for d = 76.1–108 mm)
  • Length-adjustable actuator lever (only for d = 108 mm)
  • Pressing indicator
  • Leaky if unpressed
  • Seal ring made of CIIR, black
  • Pressing socket with transparent protection plug

Operating temperature: -20 - +120 °C

Material: CrNiMo steel 1.4401 (EN 10088)

Download the installation instructions: Installation of Geberit Mapress Geberit Mapress system

DN d k m L L1 L2 Z PN
mm mm mm mm cm cm cm cm bar
25 28 – – 14.2 7.2 13 4.8 16
Photo Draft
Photo Geberit Mapress Ball valve with lever, with press sockets, stainless steel 1.4401, d 35 [Code number: 92104] Draft Geberit Mapress Ball valve with lever, with press sockets, stainless steel 1.4401, d 35 [Code number: 92104]
Geberit Mapress Ball valve with lever, with press sockets, stainless steel 1.4401, d 35 [Code number: 92104]
Details 		92104

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For heating water
  • For cooling water without antifreeze agent
  • For cooling water with antifreeze agent
  • For remote network heating water ≤ 120 °C
  • For service water
  • For treated water (application range according to Technical Information „Treated water“)
  • For grey and black water with pH value > 6.0
  • For extinguishing water (wet)
  • For compressed air (oil purity class 0–3)

Characteristics:

  • Spindle caulk made of PTFE
  • Section seal of flange and ball made of PTFE
  • Fulfils requirements in accordance with TA Air VDI 2440
  • Connecting flange for motor in accordance with EN ISO 5211 (only for d = 76.1–108 mm)
  • Length-adjustable actuator lever (only for d = 108 mm)
  • Pressing indicator
  • Leaky if unpressed
  • Seal ring made of CIIR, black
  • Pressing socket with transparent protection plug

Operating temperature: -20 - +120 °C

Material: CrNiMo steel 1.4401 (EN 10088)

Download the installation instructions: Installation of Geberit Mapress Geberit Mapress system

DN d k m L L1 L2 Z PN
mm mm mm mm cm cm cm cm bar
32 35 – – 17 8 13 5.9 16
Photo Draft
Photo Geberit Mapress Ball valve with lever, with press sockets, stainless steel 1.4401, d 42 [Code number: 92105] Draft Geberit Mapress Ball valve with lever, with press sockets, stainless steel 1.4401, d 42 [Code number: 92105]
Geberit Mapress Ball valve with lever, with press sockets, stainless steel 1.4401, d 42 [Code number: 92105]
Details 		92105

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For heating water
  • For cooling water without antifreeze agent
  • For cooling water with antifreeze agent
  • For remote network heating water ≤ 120 °C
  • For service water
  • For treated water (application range according to Technical Information „Treated water“)
  • For grey and black water with pH value > 6.0
  • For extinguishing water (wet)
  • For compressed air (oil purity class 0–3)

Characteristics:

  • Spindle caulk made of PTFE
  • Section seal of flange and ball made of PTFE
  • Fulfils requirements in accordance with TA Air VDI 2440
  • Connecting flange for motor in accordance with EN ISO 5211 (only for d = 76.1–108 mm)
  • Length-adjustable actuator lever (only for d = 108 mm)
  • Pressing indicator
  • Leaky if unpressed
  • Seal ring made of CIIR, black
  • Pressing socket with transparent protection plug

Operating temperature: -20 - +120 °C

Material: CrNiMo steel 1.4401 (EN 10088)

Download the installation instructions: Installation of Geberit Mapress Geberit Mapress system

DN d k m L L1 L2 Z PN
mm mm mm mm cm cm cm cm bar
40 42 – – 19.4 9.1 16 6.7 16
Photo Draft
Photo Geberit Mapress Ball valve with lever, with press sockets, stainless steel 1.4401, d 54 [Code number: 92106] Draft Geberit Mapress Ball valve with lever, with press sockets, stainless steel 1.4401, d 54 [Code number: 92106]
Geberit Mapress Ball valve with lever, with press sockets, stainless steel 1.4401, d 54 [Code number: 92106]
Details 		92106

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For heating water
  • For cooling water without antifreeze agent
  • For cooling water with antifreeze agent
  • For remote network heating water ≤ 120 °C
  • For service water
  • For treated water (application range according to Technical Information „Treated water“)
  • For grey and black water with pH value > 6.0
  • For extinguishing water (wet)
  • For compressed air (oil purity class 0–3)

Characteristics:

  • Spindle caulk made of PTFE
  • Section seal of flange and ball made of PTFE
  • Fulfils requirements in accordance with TA Air VDI 2440
  • Connecting flange for motor in accordance with EN ISO 5211 (only for d = 76.1–108 mm)
  • Length-adjustable actuator lever (only for d = 108 mm)
  • Pressing indicator
  • Leaky if unpressed
  • Seal ring made of CIIR, black
  • Pressing socket with transparent protection plug

Operating temperature: -20 - +120 °C

Material: CrNiMo steel 1.4401 (EN 10088)

Download the installation instructions: Installation of Geberit Mapress Geberit Mapress system

DN d k m L L1 L2 Z PN
mm mm mm mm cm cm cm cm bar
50 54 – – 22.1 10.2 16 7.5 16
Photo Draft
Photo Geberit Mapress Ball valve with lever, with press sockets, stainless steel 1.4401, d 76,1 [Code number: 92107] Draft Geberit Mapress Ball valve with lever, with press sockets, stainless steel 1.4401, d 76,1 [Code number: 92107]
Geberit Mapress Ball valve with lever, with press sockets, stainless steel 1.4401, d 76,1 [Code number: 92107]
Details 		92107

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For heating water
  • For cooling water without antifreeze agent
  • For cooling water with antifreeze agent
  • For remote network heating water ≤ 120 °C
  • For service water
  • For treated water (application range according to Technical Information „Treated water“)
  • For grey and black water with pH value > 6.0
  • For extinguishing water (wet)
  • For compressed air (oil purity class 0–3)

Characteristics:

  • Spindle caulk made of PTFE
  • Section seal of flange and ball made of PTFE
  • Fulfils requirements in accordance with TA Air VDI 2440
  • Connecting flange for motor in accordance with EN ISO 5211 (only for d = 76.1–108 mm)
  • Length-adjustable actuator lever (only for d = 108 mm)
  • Pressing indicator
  • Leaky if unpressed
  • Seal ring made of CIIR, black
  • Pressing socket with transparent protection plug

Operating temperature: -20 - +120 °C

Material: CrNiMo steel 1.4401 (EN 10088)

Download the installation instructions: Installation of Geberit Mapress Geberit Mapress system

DN d k m L L1 L2 Z PN
mm mm mm mm cm cm cm cm bar
65 76.1 70 9 29.1 14 22.5 9.3 16

© Inrusstrade.ru 1999-2024. "Inrusstrade" Ltd. Copying and quoting is prohibited