Logo
Ru| En

Office: M. Baumanskaya

Warehouse: Lenin Hills

Floor drains

Home→ Catalog→ Sewerage→ Domestic sewerage→ Floor drains

Drains for internal premises can be divided by area of ​​application. So this group of products includes drains for basements, drains for internal premises, drains for shower zones, including drains which are installed into walls or floors.

Drains for internal premises can be connected to plumbing fixtures. These drains have high capacity which, depending on the model, can reach 2.75 l/s. Visible parts of all the drains have the elaborate design. The drains are equipped with additional equipment, for example, strainers, "dry" siphons etc.

The capacity of the drains for basements and technical rooms can be up to 2.5 l/s. The drains are equipped with strainers, additional outlets, check valves etc. They are characterized by an increased permissible load - they withstand load up to 15 tons.

Drains for shower zones are installed in the floor or in the wall, and drains installed in the wall increase the visual space of the shower zone and they do not break pattern tiles.

Also the group of products includes spare parts for drains:

  • Flanges;
  • Gratings;
  • Extension sets;
  • O-rings;
  • Drain bodies etc.
Photo Наименование Article Цена
Photo Draft
Photo Hutterer & Lechner Floor drain with flange, trap seal, cut-to-size grate frame, horizontal, DN75/110 [Code number: HL 72.1N] Draft Hutterer & Lechner Floor drain with flange, trap seal, cut-to-size grate frame, horizontal, DN75/110 [Code number: HL 72.1N]
Hutterer & Lechner Floor drain with flange, trap seal, cut-to-size grate frame, horizontal, DN75/110 [Code number: HL 72.1N]
Details 		HL 72.1N 14 220 rub

Floor drain HL 72.1N has horizontal outlet DN75/110. The floor drain is equipped with cut-to-size grate frame plastic 20 - 70 mm, grate 147х147 mm, strainer for catching debris, flange, cleaning eye and trap seal. Depth of trap seal is 60 mm. Capacity is 1.5 l/s. Load class is K - 300 kg.

Diameter Capacity Load Weight
DN, mm l/s kg gr
75/110 1,5 300 1330
 
Material of spare parts
Grate Strainer Grate frame Extension Body Reduction
           
stainless steel polypropylene polypropylene polypropylene polypropylene polypropylene
 
Packaging data (carton)
Height Width Depth Weight Volume
mm mm mm kg m3
185 305 305 1,58 0,017209625

Download data sheet: Floor drain HL 72.1N
Photo Draft
Photo Hutterer & Lechner Basement drain body, horizontal, DN110 [Code number: HL 72K/1] Draft Hutterer & Lechner Basement drain body, horizontal, DN110 [Code number: HL 72K/1]
Hutterer & Lechner Basement drain body, horizontal, DN110 [Code number: HL 72K/1]
Details 		HL 72K/1 2 538 rub
Photo Draft
Photo Hutterer & Lechner Basement drain with trap seal, cut-to-size plastic grate frame, horizontal, DN110 [Code number: HL 72N] Draft Hutterer & Lechner Basement drain with trap seal, cut-to-size plastic grate frame, horizontal, DN110 [Code number: HL 72N]
Hutterer & Lechner Basement drain with trap seal, cut-to-size plastic grate frame, horizontal, DN110 [Code number: HL 72N]
Details 		HL 72N 10 993 rub

Basement drain HL 72N is made of polypropylene. It is installed in the basements and technical areas. The drain is connected to pipes DN110, its capacity is 1,6 l/s. It can withstand load up to 300 kg. The drain is equipped with trap seal, cut-to-size grate frame 19 - 65 mm / 148 x 148 mm and grate 138 x 138 mm. Height of trap seal is 60 mm.

Diameter Capacity Load Weight
DN, mm l/s kg gr
110 1,6 300 830
 
Material of spare parts
Grate Strainer Extension Grate frame Body
         
stainless steel polypropylene polypropylene polypropylene polypropylene
 
Packaging data (carton)
Height Width Depth Weight Volume
mm mm mm kg m3
160 180 300 1,07 0,00864

Download data sheet: Basement drain HL 72N
Photo Draft
Photo Hutterer & Lechner Plug-in drain, not socket, DN110 [Code number: HL 73.0] Draft Hutterer & Lechner Plug-in drain, not socket, DN110 [Code number: HL 73.0]
Hutterer & Lechner Plug-in drain, not socket, DN110 [Code number: HL 73.0]
Details 		HL 73.0 11 898 rub

Application area:

  • For drainage

Characteristics:

  • Material: PP / stainless steel
  • Dimension: DN110
  • capacity: 1,1 l/s
  • grate frame: 121 x 121 mm
  • grate: stainless steel / 115 x 115 mm
  • load class: K - 300 kg

It has alternatives: HL 73.2, HL 73Pr.

The drain is universal, suitable for installation on balconies and terraces. Connects to any socketless pipes. There is an odor-locking valve, the grill is attached using the "CLICK-CLAK" system. Supplied with an assembly plug.

Weight: 0,397 kg

 
Packaging data (carton)
Height Width Depth Weight Volume
mm mm mm kg m3
155 205 205 0,528 0,006513875

Documentation

Download data sheet:   Drain HL 73.0
Photo Draft
Photo Hutterer & Lechner Plug-in drain with frost-proof stench flap, not socket, DN110 [Code number: HL 73.2] Draft Hutterer & Lechner Plug-in drain with frost-proof stench flap, not socket, DN110 [Code number: HL 73.2]
Hutterer & Lechner Plug-in drain with frost-proof stench flap, not socket, DN110 [Code number: HL 73.2]
Details 		HL 73.2 13 423 rub

Application area:

  • For drainage

Characteristics:

  • Material: PP / stainless steel
  • Dimension: DN110
  • capacity: 0,8 l/s
  • grate frame: 121 x 121 mm
  • grate: stainless steel / 115 x 115 mm
  • load class: K - 300 kg

It has alternatives: HL 73.0, HL 73Pr.

The drain is universal, suitable for installation on balconies and terraces. Connects to any socketless pipes. There is an odor-locking valve, the grill is attached using the "CLICK-CLAK" system. Supplied with an assembly plug.

Weight: 0,447 kg

 
Packaging data (carton)
Height Width Depth Weight Volume
mm mm mm kg m3
155 205 205 0,578 0,006513875

Documentation

Download data sheet:   Drain HL 73.2
Photo Draft
Photo Hutterer & Lechner Plug-in drain Primus, not socket, DN110 [Code number: HL 73Pr] Draft Hutterer & Lechner Plug-in drain Primus, not socket, DN110 [Code number: HL 73Pr]
Hutterer & Lechner Plug-in drain Primus, not socket, DN110 [Code number: HL 73Pr]
Details 		HL 73Pr 13 865 rub

Plug-in drain Primus HL 73Pr is designed for installation indoors without waterproofing. Service life of the drain is not less than 50 years. Temperature of waste water should not exceed  +85 °C and for a short period of time it can rise up to 100 °C. The drain is equipped with "Primus" trap, stainless steel frame 121 x 121 mm, system "Klick-Klack" and grate 115 x 115 mm. Capacity is 0,46 l/s. The drain can endure load up to 300 kg.

Diameter Capacity Load Weight
DN, mm l/s kg gr
110 0,46 300 457
 
Material of spare parts
Grate Trap Primus Grate frame Body
       
stainless steel polypropylene stainless steel polypropylene
 
Packaging data (carton)
Height Width Depth Weight Volume
mm mm mm kg m3
155 205 205 0,572 0,006513875

Documentation

Download example of product installation:  Floor drain HL 73Pr

Photo Draft
Photo Hutterer & Lechner Basement drain with removable triple anti-flood valve, horizontal, DN110 [Code number: HL 77] Draft Hutterer & Lechner Basement drain with removable triple anti-flood valve, horizontal, DN110 [Code number: HL 77]
Hutterer & Lechner Basement drain with removable triple anti-flood valve, horizontal, DN110 [Code number: HL 77]
Details 		HL 77 40 708 rub

Basement drain HL 77 is installed in the basements or technical areas. It connects topipes with diameter of 110 mm. The drain is equipped with  removable triple anti-flood valve (2 x automatically, 1 x manual blocking), 2-piece plastic grate 180 x 250 mm and bucket. Capacity is 1,58 l/s. Depth of trap seal is 60 mm. Outlet is horizontal.

Diameter Capacity Load Weight
DN, mm l/s kg gr
110 1,58 300 3340
 
Material of spare parts
Grate Rising ball assembly Body
     
ABS ABS ABS
 
Packaging data (carton)
Height Width Depth Weight Volume
mm mm mm kg m3
250 230 410 3,25 0,023575

Download data sheet: Basement drain HL 77
Photo Draft
Photo Hutterer & Lechner Basement drain with inlet DN50, removable triple anti-flood valve, horizontal, DN110 [Code number: HL 77.1] Draft Hutterer & Lechner Basement drain with inlet DN50, removable triple anti-flood valve, horizontal, DN110 [Code number: HL 77.1]
Hutterer & Lechner Basement drain with inlet DN50, removable triple anti-flood valve, horizontal, DN110 [Code number: HL 77.1]
Details 		HL 77.1 49 538 rub

Basement drain HL 77.1 is installed in the basements or technical areas. Diameter of outlet is 110 mm and diameter of inlet is 50 mm. The drain is equipped with  removable triple anti-flood valve (2 x automatically, 1 x manual blocking), 2-piece plastic grate 180 x 250 mm and bucket. Capacity is 1,58 l/s. Depth of trap seal is 60 mm.

Diameter, DN mm Capacity Load Weight
inlet outlet l/s kg gr
50 110 1,58 300 3550
 
Material of spare parts
Grate Rising ball assembly Body
     
ABS ABS ABS
 
Packaging data (carton)
Height Width Depth Weight Volume
mm mm mm kg m3
250 230 410 3,31 0,023575

Download data sheet: Basement drain HL 77.1
Photo
Photo Hutterer & Lechner Drain body for balcony and terrace, without flange, with frost-proof flap seal (Russia) [Code number: HL 80.0K]
Hutterer & Lechner Drain body for balcony and terrace, without flange, with frost-proof flap seal (Russia) [Code number: HL 80.0K]
Details 		HL 80.0K
Photo Draft
Photo Hutterer & Lechner Floor drain with trap seal, ball-joint, DN50/75 [Code number: HL 80.1] (Russia) Draft Hutterer & Lechner Floor drain with trap seal, ball-joint, DN50/75 [Code number: HL 80.1] (Russia)
Hutterer & Lechner Floor drain with trap seal, ball-joint, DN50/75 [Code number: HL 80.1] (Russia)
Details 		HL 80.1 7 870 rub

Floor drain HL 80.1 has ball-joint outlet (for horizontal and vertical use). Diameter of the drain is 50/75 mm, its weight is 625 grams.Capacity is 0.5 l/s, device can endure load up to 300 kg. The floor drain have a grate 115*115 mm and plastic grate frame 123*123 mm. Depth of trap seal is 50 mm. The floor drain disposes effluents from the floor level and waterproofing, and temperature of effluents should be below 85 °C. Height of the grate frame can be adjusted from the smallest to largest.

Diameter Capacity Load Weight
DN, mm l/s kg gr
50/75 0,5 300 625
 
Material of spare parts
Grate Trap cartridge Grate frame Extension Body
         
stainless steel polypropylene polypropylene polypropylene polyethylen
 
Packaging data (carton)
Height Width Depth Weight Volume
mm mm mm kg m3
155 225 295 0,745 0,010288125

Documentation

Download data sheet:  Floor drain HL 80.1

Download example of product installation:  Floor drain HL 80.1

Photo
Photo Hutterer & Lechner Floor drain with trap seal, ball-joint, with extension KLICK-KLACK, ball-joint, DN50/75 [Code number: HL 80.1-3000] (Russia)
Hutterer & Lechner Floor drain with trap seal, ball-joint, with extension KLICK-KLACK, ball-joint, DN50/75 [Code number: HL 80.1-3000] (Russia)
Details 		HL 80.1-3000 12 698 rub

Floor drain HL 80.1-3000 is designed for installation inside buildings. It has ball-joint outlet DN50/75. The drain has grate 115*115 mm - it is made of stainless steel. Size of grate frame is 123*123 mm. Capacity is 0,5 l/s. The drain can endure load up to 300 kg. Also the drain is equipped with bitumen membrane trap seal. Operating temperature is +85°С, and it can increase up to.+100°С for short time period.

Diameter Capacity Load Weight
DN, mm l/s kg gr
50/75 0,5 300 625
 
Material of spare parts
Grate Trap cartridge Extension Grate frame Body
         
stainless steel polypropylene polypropylene stainless steel polyethene
 
Packaging data (carton)
Height Width Depth Weight Volume
mm mm mm kg m3
155 225 295 0,745 0,010288125

Documentation

Download data sheet: Floor drain HL 80.1-3000
Photo Draft
Photo Hutterer & Lechner Floor drain as #HL80.1, ball-joint, but with KLICK-KLAK [Code number: HL 80.1-3000.3*] Draft Hutterer & Lechner Floor drain as #HL80.1, ball-joint, but with KLICK-KLAK [Code number: HL 80.1-3000.3*]
Hutterer & Lechner Floor drain as #HL80.1, ball-joint, but with KLICK-KLAK [Code number: HL 80.1-3000.3*]
Details 		HL 80.1-3000.3*

Application area:

  • For indoor use

Characteristics:

  • Material: PP
  • Dimension: DN50/75
  • capacity: 0,5 l/sec
  • visual parts: brass
  • load class: 300 kg

Weight: 0,625 kg

 
Packaging data (carton)
Height Width Depth Weight Volume
mm mm mm kg m3
155 225 295 0,745 0,010288125

Photo Draft
Photo Hutterer & Lechner Floor drain CeraDrain ball-joint with polymer concrete collar and trap seal, DN50/75 [Code number: HL 80.1C] Draft Hutterer & Lechner Floor drain CeraDrain ball-joint with polymer concrete collar and trap seal, DN50/75 [Code number: HL 80.1C]
Hutterer & Lechner Floor drain CeraDrain ball-joint with polymer concrete collar and trap seal, DN50/75 [Code number: HL 80.1C]
Details 		HL 80.1C 43 076 rub

Floor drain HL 80.1C has ball-joint outlet (for horizontal and vertical use). Diameter of the drain is 50/75 mm, its weight is 6100 grams.Capacity is 0.5 l/s, device can endure load up to 300 kg. The floor drain is equipped with a grate 115*115 mm and plastic grate frame 123*123 mm, steel mesh and CeraDrain collar with polymer concrete collar. Depth of trap seal is 50 mm.

Diameter Capacity Load Weight
DN, mm l/s kg gr
50/75 0,5 300 6100
 
Material of spare parts
Grate Trap cartridge Grate frame Extension Body
         
stainless steel polypropylene polypropylene polypropylene polyethylen
polymer concrete
steel mesh
 
Packaging data (carton)
Height Width Depth Weight Volume
mm mm mm kg m3
165 480 480 5,25 0,038016

Documentation

Download example of product installation:  Floor drain HL 80.1C

Hutterer Lechner Drain with console, outlet DN - 50/75, made of polymer concrete, round grate [Code number: HL 80.1CR]
Details 		HL 80.1CR 42 453 rub
Photo Draft
Photo Hutterer & Lechner Floor drain, ball-joint, with bitumen membrane and trap seal, DN50/75 [Code number: HL 80.1H] Draft Hutterer & Lechner Floor drain, ball-joint, with bitumen membrane and trap seal, DN50/75 [Code number: HL 80.1H]
Hutterer & Lechner Floor drain, ball-joint, with bitumen membrane and trap seal, DN50/75 [Code number: HL 80.1H]
Details 		HL 80.1H 16 694 rub

Floor drain HL 80.1H has ball-joint outlet (for horizontal and vertical use) and bitumen membrane d 420 mm. Diameter of the drain is 50/75 mm, its weight is 1195 grams.Capacity is 0.5 l/s, device can endure load up to 300 kg. The floor drain is equipped with a grate 115*115 mm, grate frame 123*123 mm and trap seal.

Diameter Capacity Load Weight
DN, mm l/s kg gr
50/75 0,5 300 1195
 
Material of spare parts
Grate Trap cartridge Extension Grate frame Body
         
stainless steel polypropylene polypropylene polypropylene polyethylen
bitumen membrane
 
Packaging data (carton)
Height Width Depth Weight Volume
mm mm mm kg m3
145 260 435 1,52 0,0163995

Documentation

Download example of product installation:  Floor drain HL 80.1H

Photo Draft
Photo Hutterer & Lechner Floor drain as HL 80.1H, but with extension KLICK-KLACK [Code number: HL 80.1H-3000] Draft Hutterer & Lechner Floor drain as HL 80.1H, but with extension KLICK-KLACK [Code number: HL 80.1H-3000]
Hutterer & Lechner Floor drain as HL 80.1H, but with extension KLICK-KLACK [Code number: HL 80.1H-3000]
Details 		HL 80.1H-3000 20 763 rub

Floor drain HL 80.1H-3000 is designed for installation inside buildings. It has ball-joint outlet DN50/75. The drain has grate 115*115 mm - it is made of stainless steel. Size of grate frame is 123*123 mm. Capacity is 0,5 l/s. The drain can endure load up to 300 kg. Also the drain is equipped with extension KLICK-KLACK. Height of trap seal is 50 mm.

Diameter Capacity Load Weight
DN, mm l/s kg gr
50/75 0,5 300 1195
 
Material of spare parts
Grate Trap cartridge Extension Grate frame Body
         
stainless steel polypropylene polypropylene stainless steel polyethene
bitumen membrane
 
Packaging data (carton)
Height Width Depth Weight Volume
mm mm mm kg m3
145 260 435 1,52 0,0163995
Photo
Photo Hutterer & Lechner Floor drain with bitumen membrane, with decorative grating for tiling, ball-joint, DN50/75 [Code number: HL 80.1H-3020]
Hutterer & Lechner Floor drain with bitumen membrane, with decorative grating for tiling, ball-joint, DN50/75 [Code number: HL 80.1H-3020]
Details 		HL 80.1H-3020 26 949 rub
Photo Draft
Photo Hutterer & Lechner Floor drain with bitumen membrane and trap seal, ball-joint, DN50/75 [Code number: HL 80.1HR] Draft Hutterer & Lechner Floor drain with bitumen membrane and trap seal, ball-joint, DN50/75 [Code number: HL 80.1HR]
Hutterer & Lechner Floor drain with bitumen membrane and trap seal, ball-joint, DN50/75 [Code number: HL 80.1HR]
Details 		HL 80.1HR 19 369 rub

Floor drain HL 80.1HR has ball-joint outlet (for horizontal and vertical use) and bitumen membrane d 420 mm. Diameter of the drain is 50/75 mm, its weight is 1220 grams.Capacity is 0.5 l/s, device can endure load up to 300 kg. The floor drain is equipped with a plate d 112 mm, cut-to-size plastic extension 20 - 73 mm with frame round d 131 mm and trap seal.

Diameter Capacity Load Weight
DN, mm l/s kg gr
50/75 0,5 300 1220
 
Material of spare parts
Grate Trap cartridge Grate frame round Body
       
stainless steel polypropylene polypropylene polyethylen
bitumen membrane
 
Packaging data (carton)
Height Width Depth Weight Volume
mm mm mm kg m3
145 260 435 1,6 0,0163995

Documentation

Download example of product installation:  Floor drain HL 80.1HR

Photo Draft
Photo Hutterer & Lechner Floor drain, ball-joint with trap seal, round d 133mm, DN50/75 [Code number: HL 80.1R] Draft Hutterer & Lechner Floor drain, ball-joint with trap seal, round d 133mm, DN50/75 [Code number: HL 80.1R]
Hutterer & Lechner Floor drain, ball-joint with trap seal, round d 133mm, DN50/75 [Code number: HL 80.1R]
Details 		HL 80.1R 11 963 rub

Floor drain HL 80.1R has ball-joint outlet (for horizontal and vertical use) and flange. Diameter of the drain is 50/75 mm, its weight is 650 grams.Capacity is 0.5 l/s, device can endure load up to 300 kg. The floor drain is equipped with a plate d 112 mm, cut-to-size extension 20 - 73 mm with frame round d 133 mm and trap seal.

Diameter Capacity Load Weight
DN, mm l/s kg gr
50/75 0,5 300 650
 
Material of spare parts
Grate Trap cartridge Grate frame round Body
       
stainless steel polypropylene polypropylene polyethylen
 
Packaging data (carton)
Height Width Depth Weight Volume
mm mm mm kg m3
155 225 295 0,822 0,010288125

Documentation

Download example of product installation:  Floor drain HL 80.1R

Photo Draft
Photo Hutterer & Lechner Floor drain with trap seal, coverplate and stand pipe, ball-joint, DN50/75 [Code number: HL 80.2] Draft Hutterer & Lechner Floor drain with trap seal, coverplate and stand pipe, ball-joint, DN50/75 [Code number: HL 80.2]
Hutterer & Lechner Floor drain with trap seal, coverplate and stand pipe, ball-joint, DN50/75 [Code number: HL 80.2]
Details 		HL 80.2 9 159 rub

Floor drain HL 80.2 has ball-joint outlet (for horizontal and vertical use) and flange. Diameter of the drain is 50/75 mm, its weight is 535 grams.Capacity is 0.5 l/s. The floor drain is equipped with a grate frame 12 - 73 mm / 100 x 100 mm, coverplate 94 x 94 mm and stand pipe 100 mm.

Diameter Capacity Load Weight
DN, mm l/s kg gr
50/75 0,5   535
 
Material of spare parts
Stand pipe Bell trap Extension Grate frame Body
         
polycarbonat polypropylene polypropylene polypropylene polyethylen
 
Packaging data (carton)
Height Width Depth Weight Volume
mm mm mm kg m3
155 225 295 0,73 0,010288125

Documentation

Download example of product installation:  Floor drain HL 80.2

© Inrusstrade.ru 1999-2026. "Inrusstrade" Ltd. Copying and quoting is prohibited