Floor drains

HL 2090KK - it is special "dry" siphon "Primus" with capacity of 0,43 l/s. It is made of polypropylene. Depth of trap seal is 30 mm. The siphon is used for improving the drains HL 90(Pr-3000) series. The device protects premises against sewer smells when drying trap seal.

Characteristics of HL sewage equipment:

• Complies with ISO 9001
• Safety for ecology and health
• Products undergo laboratory testing
• Durability
• Attractive appearance

Детали:

• Grating "Klick-Klack"
• Syfon HL 2090KK

Application purpose:

• For draining wastewater from floor level
• For installation inside buildings

Characteristics:

• release type: horizontal;
• low mounting height - only 69 mm;
• there is a "dry" siphon "Primus" (the height of the water seal is 30 mm);
• it is possible to use in screeds with a thickness of not more than 100 mm;
• the height of the extension element can be adjusted from 12 to 70 mm by cutting (it is also possible to use extensions);
• the temperature of the drains should not exceed +85°C (it is possible to increase up to +100°C for a short period of time - no more than 200 liters);
• suitable for installation with socket pipes made of PE and PP;
• warranty: 1 year;
• service life: 50 years.

Mounting example

Technical characteristics

Documentation

Download example of use: Floor drain HL 90Pr

Application purpose:

• For draining wastewater from floor level
• For installation inside buildings

Characteristics:

• release type: horizontal;
• low mounting height - only 69 mm;
• there is a "dry" siphon "Primus";
• if the diameter of the connected pipe is 40 mm, then the section of the outlet pipe with DN50 should be cut off;
• the height of the extension can be adjusted from 10 to 80 mm by cutting (it is also possible to use extensions);
• the temperature of the drains should not exceed +85°C (it is possible to increase up to +100°C for a short period of time - no more than 200 liters);
• corresponds to GOST 23289-94;
• warranty: 1 year;
• service life: 50 years.

Produced in Russia.

Mounting example

Technical characteristics

Documentation

Download example of use: Floor drain HL 90Pr-3000

Floor drain HL 90Pr-3020 is designed for installation inside buildings. It has horizontal outlet DN40/50. The drain has mould for tiles 112х112 mm - it is made of stainless steel and polypropylene. Size of grate frame is 132х132 mm. Capacity is 0,43 l/s. The drain can endure load up to 300 kg. Also the drain is equipped with a siphon PRIMUS.

Download example of use: Floor drain HL 90Pr-3020

Shower block HL 530F.0 with horizontal outlet DN50 is intended for near-wall installation. Shower block can use for removing wastewater with temperature to 85 °C. Size of shower block is 256x85x1200 mm. Shower block is equipped with siphone Primus, which is securely "lock" sewer smells. Without visible parts.

Shower block with horizontal outlet DN50, removable trap "Primus".

Shower block HL 530.0 with drain is intended for near-wall installation. Shower block can use for removing wastewater with temperature to 85 °C. You can adjust the height extension by cropping it. Trap body integrated in the shower block is rotated by 180°. Size of shower block is 1200x256x115 mm. Capacity is 0,8 l/s. Shower block is equipped with siphone Primus, which is securely "lock" sewer smells. Without visible parts.

Download the installation instructions of product: Shower block HL 530.0

The HL Company produces prefabricated shower floor HL 523N-90*90. Include:
- Protection plate 90х90 cm with gravity layer. Plate is made of EPS;
- Shower trap DN50 with ball-joint outlet DN50/40, adjustable from vertical to horizontal;
- Siphon;
- Hair strainer;
- Stainless steel grate 115 x 115 mm and chromed frame 121 x 121 mm.
Application purpose: for shower trays.

Download the installation instructions of product: Prefabricated shower floor HL 523N - 90x90

The HL Company produces prefabricated shower floor HL 523N-150x110. Include:
- Protection plate 150x110 cm with gravity layer. Plate is made of EPS;
- Shower trap with ball-joint outlet DN50, adjustable from vertical to horizontal;
- Siphon;
- Mounting plug;
- Stainless steel grate 115 x 115 mm and chromed frame 121 x 121 mm.
Application purpose: for shower trays.

The HL Company produces prefabricated shower floor HL 523N-120*120. Include:
- Protection plate 120x120 cm with gravity layer. Plate is made of EPS;
- Shower trap with ball-joint outlet DN50, adjustable from vertical to horizontal;
- Siphon;
- Hair strainer;
- Stainless steel grate 115 x 115 mm and chromed frame 121 x 121 mm.
Application purpose: for shower trays.

Download the installation instructions of product: Prefabricated shower floor HL 523N - 120x120

The HL company produces prefabricated shower floor HL 523-120x120. The kit includes:

• Drain with ball joint outlet DN40/50;
• Siphon;
• Plate 120x120 cm with integrated decline;
• Chromed frame and grate.

The prefabricated shower floor made of PP/PE - EPS, grate made of stainless steel, and it can can withstand high loads - up to 300 kg

The HL company produces prefabricated shower floor HL 523-90x90, it is equiped with with a siphon, ball joint outlet DN50/40. Size of the prefabricated shower floor is 90x90 cm. It can be used for installation of shower trays.

The HL company produces prefabricated shower floor HL 523-90x90-3125, it is equiped with with a siphon and grate. Size of the prefabricated shower floor is 90x90 cm. It can be used for installation of shower trays.

HL 523U - 90x90 Foundation element 90 cm x 90 cm x 8,5 cm. It have a special hole for a siphon. If you use of this foundation element, you will install foundation under a shower cabin at the desired height easily. Also you will not need pour concrete for a shower base.

The HL Company produces special extension element for shower block HL 530F.0. Extension element HL 530VF-30 has a waterproof coating, and it can increase shower block to 300 mm. Extension element is made of EPS, and it weighs a little - just 1010 grams.

HL 3127 - it is special grate «Primus Design» for improving of extension «Klik-Klak». It is made of stainless steel, size of grate is 115*115*5 mm. It can withstand high load - up to 1.5 tonnes.

HL 3125 - it is special grate «Yukon» for improving of extension «Klik-Klak». It is made of stainless steel, size of grate is 115*115*5 mm. It can withstand high load - up to 1.5 tonnes.

HL 3124 - it is special grate «Nil» for improving of extension «Klik-Klak». It is made of stainless steel, size of grate is 115*115*5 mm. It can withstand high load - up to 1.5 tonnes.

Grate «Orinoko» HL 3123 is used for improving of extension «Klik-Klak». It is made of stainless steel, size of grate is 115*115*5 mm. It can withstand high load - up to 1.5 tonnes.