Logo
Ru| En

Office: M. Baumanskaya

Warehouse: Leninsky urban district

Fittings for water supply

Home→ Catalog→ Equipment for water supply→ Fittings for water supply

The pipeline for water supply systems must have certain characteristics. For example, pipes and fittings for water supply systems must be safe for people and they must have high corrosion resistance which will adversely affect the quality of the supplied water.

The group of products includes fittings for water supply systems, including drinking water, of the highest quality:

  • Fittings Wavin Future K1 - this system is mounted by pressing, is made of mineral-reinforced polypropylene;
  • Geberit Mapress fittings can be made of several types of steel, in particular stainless steel and carbon steel. All fittings of this pipeline system are resistant to corrosion and strength. Depending on the type, Geberit Mapress fittings for water systems withstand pressure up to 16 bar;
  • REHAU RAUTITAN fittings are made of brass, stainless steel and polymeric material PPSU (polyphenylsulfone), they can be threadless and threaded. They are connect to pipes and other fittings using special compression sleeves which provide a completely sealed connection;
  • Geberit Mepla fittings - this multilayer piping system has been tested according to EN ISO 21003 and meets all modern standards. Fittings are equipped with marking of the insert depth - it allows to control the installation and speeds up it. They are made of brass, red brass and PVDF;
  • Wavin Ecoplastik fittings are made of mineral-reinforced polypropylene, while they can be completely plastic and have threads and other elements made of nickel-plated brass;
  • PAM ULTRA Link NG collars for pipes with diameters from 50 to 275 mm are used for connecting of smooth ends pipes of cold water supply systems including drinking water. Collars withstand pressure up to 16 bar, they are suitable for pipes made of cast iron, steel, PVC and asbestos cement.
Photo Наименование Article Цена
Photo Draft
Photo [NO LONGER PRODUCED] - Geberit Mapress Carbon Steel axial expansion fitting with pressing sockets, d108 [Code number: 23931] Draft [NO LONGER PRODUCED] - Geberit Mapress Carbon Steel axial expansion fitting with pressing sockets, d108 [Code number: 23931]
[NO LONGER PRODUCED] - Geberit Mapress Carbon Steel axial expansion fitting with pressing sockets, d108 [Code number: 23931]
Details 		23931

ATTENTION! This product is temporarily unavailable for order!

Application purpose:

  • Not suitable for drinking water

Characteristics:

  • Leaky if unpressed
  • Stainless steel bellows

Scope of delivery:

  • Seal rings CIIR black

Download the installation instructions: Geberit Mapress system

d D La L
mm cm cm cm
108 13,6 +/- 2,3 54,2
Photo
Photo [NO LONGER PRODUCED] - Valve top set, for Geberit distributor unit Compact [Code number: 241.765.00.1]
[NO LONGER PRODUCED] - Valve top set, for Geberit distributor unit Compact [Code number: 241.765.00.1]
Details 		241.765.00.1

ATTENTION! This product is temporarily unavailable for order!

Application Purpose:

  • For shut-off and distributor unit Compact

Scope of delivery:

  • Upper connection part with O-ring EPDM;
  • Regulating pin with stop;
  • Extension of regulating pin with fastening screws;
  • Spanner;
  • 2 gaskets PTFE.

Material: Brass
Photo Draft
Photo [NO LONGER PRODUCED] - Geberit union connector for Euro cone, d 15-G 3/4" [Code number: 25072] Draft [NO LONGER PRODUCED] - Geberit union connector for Euro cone, d 15-G 3/4" [Code number: 25072]
[NO LONGER PRODUCED] - Geberit union connector for Euro cone, d 15-G 3/4" [Code number: 25072]
Details 		25072

ATTENTION! This product is temporarily unavailable for order!

Application Purpose

  • For copper pipes blank, nickel-plated and chrome-plated
  • For Mapress Carbon Steel system pipes
  • For Mapress Stainless Steel 1.4401 system pipes
  • For manifolds and radiator valves to Euro cone G3/4"
  • Not suitable for drinking water

Characteristics

  • Union nut nickel-plated
d G
mm ''
15 3/4
Photo Draft
Photo [NO LONGER PRODUCED. REPLACEMENT: 30089] - Geberit Mapress Stainless Steel bend 90° with plain ends, d76,1 (old) [Code number: 30409] Draft [NO LONGER PRODUCED. REPLACEMENT: 30089] - Geberit Mapress Stainless Steel bend 90° with plain ends, d76,1 (old) [Code number: 30409]
[NO LONGER PRODUCED. REPLACEMENT: 30089] - Geberit Mapress Stainless Steel bend 90° with plain ends, d76,1 (old) [Code number: 30409]
Details 		30409

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For drinking water and industrial applications
  • For heating installations

Material: CrNiMo steel 1.4401 (EN 10088)

Angle: 90°

d H H1 K K1
mm cm cm cm cm
76,1 25 25 6,2 6,2
Photo Draft
Photo [NO LONGER PRODUCED. REPLACEMENT: 30090] - Geberit Mapress Stainless Steel bend 90° with plain ends, d88,9 (old) [Code number: 30410] Draft [NO LONGER PRODUCED. REPLACEMENT: 30090] - Geberit Mapress Stainless Steel bend 90° with plain ends, d88,9 (old) [Code number: 30410]
[NO LONGER PRODUCED. REPLACEMENT: 30090] - Geberit Mapress Stainless Steel bend 90° with plain ends, d88,9 (old) [Code number: 30410]
Details 		30410

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For drinking water and industrial applications
  • For heating installations

Material: CrNiMo steel 1.4401 (EN 10088)

Angle: 90°

d H H1 K K1
mm cm cm cm cm
88,9 29,1 29,1 9 9
Photo Draft
Photo [NO LONGER PRODUCED. REPLACEMENT: 30091] - Geberit Mapress Stainless Steel bend 90° with plain end, d108 (old) [Code number: 30411] Draft [NO LONGER PRODUCED. REPLACEMENT: 30091] - Geberit Mapress Stainless Steel bend 90° with plain end, d108 (old) [Code number: 30411]
[NO LONGER PRODUCED. REPLACEMENT: 30091] - Geberit Mapress Stainless Steel bend 90° with plain end, d108 (old) [Code number: 30411]
Details 		30411

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For drinking water and industrial applications
  • For heating installations

Material: CrNiMo steel 1.4401 (EN 10088)

Angle: 90°

d H H1 K K1
mm cm cm cm cm
108 36,4 36,4 4,5 4,5
Photo Draft
Photo [NO LONGER PRODUCED. REPLACEMENT: 30049] - Geberit Mapress Stainless Steel bend 45° with plain ends, d76,1 (old) [Code number: 30879] Draft [NO LONGER PRODUCED. REPLACEMENT: 30049] - Geberit Mapress Stainless Steel bend 45° with plain ends, d76,1 (old) [Code number: 30879]
[NO LONGER PRODUCED. REPLACEMENT: 30049] - Geberit Mapress Stainless Steel bend 45° with plain ends, d76,1 (old) [Code number: 30879]
Details 		30879

ATTENTION! This product is temporarily unavailable for order!

Application purposes

  • For sanitary and industrial applications
  • For heating installations
  • For gas installations with natural gases (NG) and liquefied gases (LPG)

Material: CrNiMo steel 1.4401 (EN 10088)

Angle: 45°

d H H1 K K1
mm cm cm cm cm
76,1 22,5 22,5 6,9 6,9
Photo Draft
Photo [NO LONGER PRODUCED. REPLACEMENT: 30050] - Geberit Mapress Stainless Steel bend with plain ends 45°, d88,9 (old) [Code number: 30880] Draft [NO LONGER PRODUCED. REPLACEMENT: 30050] - Geberit Mapress Stainless Steel bend with plain ends 45°, d88,9 (old) [Code number: 30880]
[NO LONGER PRODUCED. REPLACEMENT: 30050] - Geberit Mapress Stainless Steel bend with plain ends 45°, d88,9 (old) [Code number: 30880]
Details 		30880

ATTENTION! This product is temporarily unavailable for order!

Application purposes

  • For sanitary and industrial applications
  • For heating installations
  • For gas installations with natural gases (NG) and liquefied gases (LPG)

Technical data

Material: CrNiMo steel 1.4401 (EN 10088)

Angle: 45°

d H H1 K K1
mm cm cm cm cm
88,9 26,7 26,7 10,3 10,3
Photo Draft
Photo [NO LONGER PRODUCED. REPLACEMENT: 30051] - Geberit Mapress Stainless Steel bend 45° with plain ends, d108 (old) [Code number: 30881] Draft [NO LONGER PRODUCED. REPLACEMENT: 30051] - Geberit Mapress Stainless Steel bend 45° with plain ends, d108 (old) [Code number: 30881]
[NO LONGER PRODUCED. REPLACEMENT: 30051] - Geberit Mapress Stainless Steel bend 45° with plain ends, d108 (old) [Code number: 30881]
Details 		30881

ATTENTION! This product is temporarily unavailable for order!

Application purposes

  • For sanitary and industrial applications
  • For heating installations
  • For gas installations with natural gases (NG) and liquefied gases (LPG)

Material: CrNiMo steel 1.4401 (EN 10088)

Angle: 45°

d H H1 K K1
mm cm cm cm cm
108 29,3 29,3 6,6 6,6
Photo Draft
Photo [NO LONGER PRODUCED. REPLACEMENT: 30009] - Geberit Mapress Stainless Steel bend 15° with plain ends, d76,1 (old) [Code number: 30909] Draft [NO LONGER PRODUCED. REPLACEMENT: 30009] - Geberit Mapress Stainless Steel bend 15° with plain ends, d76,1 (old) [Code number: 30909]
[NO LONGER PRODUCED. REPLACEMENT: 30009] - Geberit Mapress Stainless Steel bend 15° with plain ends, d76,1 (old) [Code number: 30909]
Details 		30909

ATTENTION! This product is temporarily unavailable for order!

Application purposes

  • For sanitary and industrial applications
  • For heating installations
  • For gas installations with natural gases (NG) and liquefied gases (LPG)

Material: CrNiMo steel 1.4401 (EN 10088)

Angle: 15°

d H H1 K K1
mm cm cm cm cm
76,1 22,8 22,8 6,5 6,5
Photo Draft
Photo [NO LONGER PRODUCED. REPLACEMENT: 30010] - Geberit Mapress Stainless Steel bend 15° with plain ends, d88,9 (old) [Code number: 30910] Draft [NO LONGER PRODUCED. REPLACEMENT: 30010] - Geberit Mapress Stainless Steel bend 15° with plain ends, d88,9 (old) [Code number: 30910]
[NO LONGER PRODUCED. REPLACEMENT: 30010] - Geberit Mapress Stainless Steel bend 15° with plain ends, d88,9 (old) [Code number: 30910]
Details 		30910

ATTENTION! This product is temporarily unavailable for order!

Application purposes

  • For sanitary and industrial applications
  • For heating installations
  • For gas installations with natural gases (NG) and liquefied gases (LPG)

Material: CrNiMo steel 1.4401 (EN 10088)

Angle: 15°

d H H1 K K1
mm cm cm cm cm
88,9 24 24 8 8
Photo Draft
Photo [NO LONGER PRODUCED. REPLACEMENT: 30011] - Geberit Mapress CuNiFe bend 15°, FKM, d108 (old) [Code number: 30911] Draft [NO LONGER PRODUCED. REPLACEMENT: 30011] - Geberit Mapress CuNiFe bend 15°, FKM, d108 (old) [Code number: 30911]
[NO LONGER PRODUCED. REPLACEMENT: 30011] - Geberit Mapress CuNiFe bend 15°, FKM, d108 (old) [Code number: 30911]
Details 		30911

ATTENTION! This product is temporarily unavailable for order!

Application purposes

  • For sanitary and industrial applications
  • For heating installations
  • For gas installations with natural gases (NG) and liquefied gases (LPG)

Material: CrNiMo steel 1.4401 (EN 10088)

Angle: 15°

d H H1 K K1
mm cm cm cm cm
108 24,9 24,9 9,5 9,5
Photo Draft
Photo [NO LONGER PRODUCED. REPLACEMENT: 30029] - Geberit Mapress Stainless Steel bend 30° with plain ends, d76,1 (old) [Code number: 30939] Draft [NO LONGER PRODUCED. REPLACEMENT: 30029] - Geberit Mapress Stainless Steel bend 30° with plain ends, d76,1 (old) [Code number: 30939]
[NO LONGER PRODUCED. REPLACEMENT: 30029] - Geberit Mapress Stainless Steel bend 30° with plain ends, d76,1 (old) [Code number: 30939]
Details 		30939

ATTENTION! This product is temporarily unavailable for order!

Application purposes

  • For sanitary and industrial applications
  • For heating installations
  • For gas installations with natural gases (NG) and liquefied gases (LPG)

Material: CrNiMo steel 1.4401 (EN 10088)

Angle: 30°

d H H1 K K1
mm cm cm cm cm
76,1 20,1 20,1 6,6 6,6
Photo Draft
Photo [NO LONGER PRODUCED] - Geberit Mapress Stainless Steel bend 30° with plain ends, d88,9 (old) [Code number: 30940] Draft [NO LONGER PRODUCED] - Geberit Mapress Stainless Steel bend 30° with plain ends, d88,9 (old) [Code number: 30940]
[NO LONGER PRODUCED] - Geberit Mapress Stainless Steel bend 30° with plain ends, d88,9 (old) [Code number: 30940]
Details 		30940

ATTENTION! This product is temporarily unavailable for order!

Application purposes

  • For sanitary and industrial applications
  • For heating installations
  • For gas installations with natural gases (NG) and liquefied gases (LPG)

Material: CrNiMo steel 1.4401 (EN 10088)

Angle: 30°

d H H1 K K1
mm cm cm cm cm
88,9 24,1 24,1 8 8
Photo Draft
Photo [NO LONGER PRODUCED. REPLACEMENT: 30031] - Geberit Mapress CuNiFe bend 30°, FKM, d108 (old) [Code number: 30941 (G)] Draft [NO LONGER PRODUCED. REPLACEMENT: 30031] - Geberit Mapress CuNiFe bend 30°, FKM, d108 (old) [Code number: 30941 (G)]
[NO LONGER PRODUCED. REPLACEMENT: 30031] - Geberit Mapress CuNiFe bend 30°, FKM, d108 (old) [Code number: 30941 (G)]
Details 		30941 (G)

ATTENTION! This product is temporarily unavailable for order!

Application purposes

  • For sanitary and industrial applications
  • For heating installations
  • For gas installations with natural gases (NG) and liquefied gases (LPG)

Technical data

Material: CrNiMo steel 1.4401 (EN 10088)

Angle: 30°

d H H1 K K1
mm cm cm cm cm
108 26,3 26,3 9,5 9,5
Photo Draft
Photo [NO LONGER PRODUCED. REPLACEMENT: 30069] - Geberit Mapress Stainless Steel bend 60° with plain ends, d76,1 (old) [Code number: 30959] Draft [NO LONGER PRODUCED. REPLACEMENT: 30069] - Geberit Mapress Stainless Steel bend 60° with plain ends, d76,1 (old) [Code number: 30959]
[NO LONGER PRODUCED. REPLACEMENT: 30069] - Geberit Mapress Stainless Steel bend 60° with plain ends, d76,1 (old) [Code number: 30959]
Details 		30959

ATTENTION! This product is temporarily unavailable for order!

Application purposes

  • For sanitary and industrial applications
  • For heating installations
  • For gas installations with natural gases (NG) and liquefied gases (LPG)

Material: CrNiMo steel 1.4401 (EN 10088)

Angle: 60°

d H H1 K K1
mm cm cm cm cm
76,1 21,5 21,5 6,5 6,5
Photo Draft
Photo [NO LONGER PRODUCED. REPLACEMENT: 30070] - Geberit Mapress Stainless Steel bend 60° with plain ends, d88,9 (old) [Code number: 30960] Draft [NO LONGER PRODUCED. REPLACEMENT: 30070] - Geberit Mapress Stainless Steel bend 60° with plain ends, d88,9 (old) [Code number: 30960]
[NO LONGER PRODUCED. REPLACEMENT: 30070] - Geberit Mapress Stainless Steel bend 60° with plain ends, d88,9 (old) [Code number: 30960]
Details 		30960

ATTENTION! This product is temporarily unavailable for order!

Application purposes

  • For sanitary and industrial applications
  • For heating installations
  • For gas installations with natural gases (NG) and liquefied gases (LPG)

Material: CrNiMo steel 1.4401 (EN 10088)

Angle: 60°

d H H1 K K1
mm cm cm cm cm
88,9 25,6 25,6 8 8
Photo Draft
Photo [NO LONGER PRODUCED. REPLACEMENT: 30071] - Geberit Mapress CuNiFe bend 60°, d108 (old) [Code number: 30961] Draft [NO LONGER PRODUCED. REPLACEMENT: 30071] - Geberit Mapress CuNiFe bend 60°, d108 (old) [Code number: 30961]
[NO LONGER PRODUCED. REPLACEMENT: 30071] - Geberit Mapress CuNiFe bend 60°, d108 (old) [Code number: 30961]
Details 		30961

ATTENTION! This product is temporarily unavailable for order!

Application purposes

  • For sanitary and industrial applications
  • For heating installations
  • For gas installations with natural gases (NG) and liquefied gases (LPG)

Material: CrNiMo steel 1.4401 (EN 10088)

Angle: 60°

d H H1 K K1
mm cm cm cm cm
108 29,2 29,2 9,5 9,5
Photo Draft
Photo [NO LONGER PRODUCED. REPLACEMENT: 33748] - Geberit Mapress Stainless Steel flange PN 10/16, with plain end, d 54 [Code number: 33728] Draft [NO LONGER PRODUCED. REPLACEMENT: 33748] - Geberit Mapress Stainless Steel flange PN 10/16, with plain end, d 54 [Code number: 33728]
[NO LONGER PRODUCED. REPLACEMENT: 33748] - Geberit Mapress Stainless Steel flange PN 10/16, with plain end, d 54 [Code number: 33728]
Details 		33728

ATTENTION! This product is temporarily unavailable for order!

Application purpose:

  • For sanitary and industrial applications
  • For heating installations

Characteristics:

  • Plain end

Scope of delivery:

  • Excluded: Set of bolts for flange
  • Excluded: Flange gasket

Technical data

Material: Stainless Cr-Ni-Mo steel 1.4401 BS 316

Download the installation instructions: Geberit Mapress system

d di D k m H h PN
mm mm cm cm cm cm cm bar
54 54,5 16,5 12,5 1,8 8,7 1,8 10 / 16

It can be used with:

Geberit flange gaskets PN 10/16 Geberit bolt sets
   
91031 91164
91032 91165
91033 91166
91034 91167
91035 91168
91036 91169
91037 91170
91038 91171
91039 91172
  91173
Photo Draft
Photo [NO LONGER PRODUCED. REPLACEMENT: 33749] - Geberit Mapress Stainless Steel flange PN 10/16, with plain end, d76,3 [Code number: 33729] Draft [NO LONGER PRODUCED. REPLACEMENT: 33749] - Geberit Mapress Stainless Steel flange PN 10/16, with plain end, d76,3 [Code number: 33729]
[NO LONGER PRODUCED. REPLACEMENT: 33749] - Geberit Mapress Stainless Steel flange PN 10/16, with plain end, d76,3 [Code number: 33729]
Details 		33729

ATTENTION! This product is temporarily unavailable for order!

Application purpose:

  • For sanitary and industrial applications
  • For heating installations

Characteristics:

  • Plain end

Scope of delivery:

  • Excluded: Set of bolts for flange
  • Excluded: Flange gasket

Technical data

Material: Stainless Cr-Ni-Mo steel 1.4401 BS 316

d di D k m H h PN
mm mm cm cm cm cm cm bar
76,1 72,1 18,5 14,5 1,8 12,6 1,8 10 / 16

It can be used with:

Geberit flange gaskets PN 10/16 Geberit bolt sets
   
91031 91164
91032 91165
91033 91166
91034 91167
91035 91168
91036 91169
91037 91170
91038 91171
91039 91172
  91173
© Inrusstrade.ru 1999-2026. "Inrusstrade" Ltd. Copying and quoting is prohibited

Privacy policy