Logo
Ru| En

Office: M. Baumanskaya

Warehouse: Leninsky urban district

Fittings for water supply

Home→ Catalog→ Equipment for water supply→ Fittings for water supply

The pipeline for water supply systems must have certain characteristics. For example, pipes and fittings for water supply systems must be safe for people and they must have high corrosion resistance which will adversely affect the quality of the supplied water.

The group of products includes fittings for water supply systems, including drinking water, of the highest quality:

  • Fittings Wavin Future K1 - this system is mounted by pressing, is made of mineral-reinforced polypropylene;
  • Geberit Mapress fittings can be made of several types of steel, in particular stainless steel and carbon steel. All fittings of this pipeline system are resistant to corrosion and strength. Depending on the type, Geberit Mapress fittings for water systems withstand pressure up to 16 bar;
  • REHAU RAUTITAN fittings are made of brass, stainless steel and polymeric material PPSU (polyphenylsulfone), they can be threadless and threaded. They are connect to pipes and other fittings using special compression sleeves which provide a completely sealed connection;
  • Geberit Mepla fittings - this multilayer piping system has been tested according to EN ISO 21003 and meets all modern standards. Fittings are equipped with marking of the insert depth - it allows to control the installation and speeds up it. They are made of brass, red brass and PVDF;
  • Wavin Ecoplastik fittings are made of mineral-reinforced polypropylene, while they can be completely plastic and have threads and other elements made of nickel-plated brass;
  • PAM ULTRA Link NG collars for pipes with diameters from 50 to 275 mm are used for connecting of smooth ends pipes of cold water supply systems including drinking water. Collars withstand pressure up to 16 bar, they are suitable for pipes made of cast iron, steel, PVC and asbestos cement.
Photo Наименование Article Цена
Photo Draft
Photo Geberit Mapress Stainless Steel T-piece, reduced, gas, d 42, d1 15 [Code number: 34140] Draft Geberit Mapress Stainless Steel T-piece, reduced, gas, d 42, d1 15 [Code number: 34140]
Geberit Mapress Stainless Steel T-piece, reduced, gas, d 42, d1 15 [Code number: 34140]
Details 		34140

ATTENTION! This product is temporarily unavailable for order!

Application purpose:

  • For gas installations with natural gases (NG) and liquefied gases (LPG)

Characteristics:

  • Marked in yellow
  • Leaky if unpressed

Scope of delivery:

  • Seal rings HNBR yellow

Material: Stainless Cr-Ni-Mo steel 1.4401 BS 316

Temperature range during operation: -20 - +70 °C

Angle: 90°

Download the installation instructions: Geberit Mapress system

d d1 d2 L L1 l l2 Z Z1 Z2
mm mm mm cm cm cm cm cm cm cm
42 15 42 11.4 5.3 5.7 5.7 2.7 3.3 2.7
Photo Draft
Photo Geberit Mapress Stainless Steel T-piece, reduced, gas, d 42, d1 18 [Code number: 34141] Draft Geberit Mapress Stainless Steel T-piece, reduced, gas, d 42, d1 18 [Code number: 34141]
Geberit Mapress Stainless Steel T-piece, reduced, gas, d 42, d1 18 [Code number: 34141]
Details 		34141

ATTENTION! This product is temporarily unavailable for order!

Application purpose:

  • For gas installations with natural gases (NG) and liquefied gases (LPG)

Characteristics:

  • Marked in yellow
  • Leaky if unpressed

Scope of delivery:

  • Seal rings HNBR yellow

Material: Stainless Cr-Ni-Mo steel 1.4401 BS 316

Temperature range during operation: -20 - +70 °C

Angle: 90°

Download the installation instructions: Geberit Mapress system

d d1 d2 L L1 l l2 Z Z1 Z2
mm mm mm cm cm cm cm cm cm cm
42 18 42 11.4 5.3 5.7 5.7 2.7 3.3 2.7
Photo Draft
Photo Geberit Mapress Stainless Steel Adapter, gas, with male thread, d 15, R 3/4" [Code number: 34142] Draft Geberit Mapress Stainless Steel Adapter, gas, with male thread, d 15, R 3/4" [Code number: 34142]
Geberit Mapress Stainless Steel Adapter, gas, with male thread, d 15, R 3/4" [Code number: 34142]
Details 		34142

ATTENTION! This product is temporarily unavailable for order!

Application purpose:

  • For gas installations with natural gases (NG) and liquefied gases (LPG)

Characteristics:

  • Marked in yellow
  • Leaky if unpressed
  • Male thread

Scope of delivery:

  • Seal ring HNBR yellow

Material: Stainless Cr-Ni-Mo steel 1.4401 BS 316

Temperature range during operation: -20 - +70 °C

Download the installation instructions: Geberit Mapress system

 

d R H L
mm   cm cm
15 3/4" 2.3 4.3
Photo Draft
Photo Geberit Mapress Stainless Steel Adapter, gas, with male thread, d 18, R 3/4" [Code number: 34143] Draft Geberit Mapress Stainless Steel Adapter, gas, with male thread, d 18, R 3/4" [Code number: 34143]
Geberit Mapress Stainless Steel Adapter, gas, with male thread, d 18, R 3/4" [Code number: 34143]
Details 		34143

ATTENTION! This product is temporarily unavailable for order!

Application purpose:

  • For gas installations with natural gases (NG) and liquefied gases (LPG)

Characteristics:

  • Marked in yellow
  • Leaky if unpressed
  • Male thread

Scope of delivery:

  • Seal ring HNBR yellow

Material: Stainless Cr-Ni-Mo steel 1.4401 BS 316

Temperature range during operation: -20 - +70 °C

Download the installation instructions: Geberit Mapress system

 

d R H L
mm   cm cm
18 3/4" 2.4 4.4
Photo Draft
Photo Geberit Mapress Stainless Steel Elbow adapter 90°, gas, with male thread, d 28, R 3/4" [Code number: 34154] Draft Geberit Mapress Stainless Steel Elbow adapter 90°, gas, with male thread, d 28, R 3/4" [Code number: 34154]
Geberit Mapress Stainless Steel Elbow adapter 90°, gas, with male thread, d 28, R 3/4" [Code number: 34154]
Details 		34154

ATTENTION! This product is temporarily unavailable for order!

Application purpose:

  • For gas installations with natural gases (NG) and liquefied gases (LPG)

Characteristics:

  • Marked in yellow
  • Leaky if unpressed
  • Male thread

Scope of delivery:

  • Seal ring HNBR yellow

Material: Stainless Cr-Ni-Mo steel 1.4401 BS 316

Temperature range during operation: -20 - +70 °C

Angle: 90°

Download the installation instructions: Geberit Mapress system

d R H L Z
mm   cm cm cm
28 3/4" 4.6 5.8 3.5
Photo Draft
Photo Geberit Mapress Stainless Steel Adapter, gas, with female thread, d 15, Rp 3/4" [Code number: 34169] Draft Geberit Mapress Stainless Steel Adapter, gas, with female thread, d 15, Rp 3/4" [Code number: 34169]
Geberit Mapress Stainless Steel Adapter, gas, with female thread, d 15, Rp 3/4" [Code number: 34169]
Details 		34169

ATTENTION! This product is temporarily unavailable for order!

Application purpose:

  • For gas installations with natural gases (NG) and liquefied gases (LPG)

Characteristics:

  • Marked in yellow
  • Leaky if unpressed
  • Female thread

Scope of delivery:

  • Seal ring HNBR yellow

Material: Stainless Cr-Ni-Mo steel 1.4401 BS 316

Temperature range during operation: -20 - +70 °C

Download the installation instructions: Geberit Mapress system

d Rp L Z
mm   cm cm
15 3/4" 3.8 0.3
Photo Draft
Photo Geberit Mapress Stainless Steel Adapter, gas, with female thread, d 18, Rp 3/4" [Code number: 34170] Draft Geberit Mapress Stainless Steel Adapter, gas, with female thread, d 18, Rp 3/4" [Code number: 34170]
Geberit Mapress Stainless Steel Adapter, gas, with female thread, d 18, Rp 3/4" [Code number: 34170]
Details 		34170

ATTENTION! This product is temporarily unavailable for order!

Application purpose:

  • For gas installations with natural gases (NG) and liquefied gases (LPG)

Characteristics:

  • Marked in yellow
  • Leaky if unpressed
  • Female thread

Scope of delivery:

  • Seal ring HNBR yellow

Material: Stainless Cr-Ni-Mo steel 1.4401 BS 316

Temperature range during operation: -20 - +70 °C

Download the installation instructions: Geberit Mapress system

d Rp L Z
mm   cm cm
18 3/4" 3.8 0.3
Photo Draft
Photo Geberit Mapress Stainless Steel bend 90°, gas, d 35 [Code number: 34187] Draft Geberit Mapress Stainless Steel bend 90°, gas, d 35 [Code number: 34187]
Geberit Mapress Stainless Steel bend 90°, gas, d 35 [Code number: 34187]
Details 		34187

ATTENTION! This product is temporarily unavailable for order!

Application purpose:

  • For gas installations with natural gases (NG) and liquefied gases (LPG)

Characteristics:

  • Marked in yellow
  • Leaky if unpressed

Scope of delivery:

  • Seal rings HNBR yellow

Material: Stainless Cr-Ni-Mo steel 1.4401 BS 316

Temperature range during operation: -20 - +70 °C

Angle: 90°

Download the installation instructions: Geberit Mapress system

d L Z
mm cm cm
35 6,8 4,2
Photo Draft
Photo Geberit Mapress Stainless Steel bend 90°, gas, d 42 [Code number: 34188] Draft Geberit Mapress Stainless Steel bend 90°, gas, d 42 [Code number: 34188]
Geberit Mapress Stainless Steel bend 90°, gas, d 42 [Code number: 34188]
Details 		34188

ATTENTION! This product is temporarily unavailable for order!

Application purpose:

  • For gas installations with natural gases (NG) and liquefied gases (LPG)

Characteristics:

  • Marked in yellow
  • Leaky if unpressed

Scope of delivery:

  • Seal rings HNBR yellow

Material: Stainless Cr-Ni-Mo steel 1.4401 BS 316

Temperature range during operation: -20 - +70 °C

Angle: 90°

Download the installation instructions: Geberit Mapress system

d L Z
mm cm cm
42 8 5
Photo Draft
Photo Geberit Mapress Stainless Steel bend 90°, gas, d 54 [Code number: 34189] Draft Geberit Mapress Stainless Steel bend 90°, gas, d 54 [Code number: 34189]
Geberit Mapress Stainless Steel bend 90°, gas, d 54 [Code number: 34189]
Details 		34189

ATTENTION! This product is temporarily unavailable for order!

Application purpose:

  • For gas installations with natural gases (NG) and liquefied gases (LPG)

Characteristics:

  • Marked in yellow
  • Leaky if unpressed

Scope of delivery:

  • Seal rings HNBR yellow

Material: Stainless Cr-Ni-Mo steel 1.4401 BS 316

Temperature range during operation: -20 - +70 °C

Angle: 90°

Download the installation instructions: Geberit Mapress system

d L Z
mm cm cm
54 10 6,5
Photo Draft
Photo Geberit Mapress Stainless Steel bend 90° with plain end, gas, d 35 [Code number: 34190] Draft Geberit Mapress Stainless Steel bend 90° with plain end, gas, d 35 [Code number: 34190]
Geberit Mapress Stainless Steel bend 90° with plain end, gas, d 35 [Code number: 34190]
Details 		34190

ATTENTION! This product is temporarily unavailable for order!

Application purpose:

  • For gas installations with natural gases (NG) and liquefied gases (LPG)

Characteristics:

  • Marked in yellow
  • Leaky if unpressed
  • Plain end

Scope of delivery:

  • Seal rings HNBR yellow

Technical data

Material: Stainless Cr-Ni-Mo steel 1.4401 BS 316

Temperature range during operation: -20 - +70 °C

Angle: 90°

Download the installation instructions: Geberit Mapress system

d H L Z
mm cm cm cm
35 7,7 6,8 4,2
Photo Draft
Photo Geberit Mapress Stainless Steel bend 90° with plain end, gas, d 42 [Code number: 34191] Draft Geberit Mapress Stainless Steel bend 90° with plain end, gas, d 42 [Code number: 34191]
Geberit Mapress Stainless Steel bend 90° with plain end, gas, d 42 [Code number: 34191]
Details 		34191

ATTENTION! This product is temporarily unavailable for order!

Application purpose:

  • For gas installations with natural gases (NG) and liquefied gases (LPG)

Characteristics:

  • Marked in yellow
  • Leaky if unpressed
  • Plain end

Scope of delivery:

  • Seal rings HNBR yellow

Technical data

Material: Stainless Cr-Ni-Mo steel 1.4401 BS 316

Temperature range during operation: -20 - +70 °C

Angle: 90°

Download the installation instructions: Geberit Mapress system

d H L Z
mm cm cm cm
42 9 8 5
Photo Draft
Photo Geberit Mapress Stainless Steel bend 90° with plain end, gas, d 54 [Code number: 34192] Draft Geberit Mapress Stainless Steel bend 90° with plain end, gas, d 54 [Code number: 34192]
Geberit Mapress Stainless Steel bend 90° with plain end, gas, d 54 [Code number: 34192]
Details 		34192

ATTENTION! This product is temporarily unavailable for order!

Application purpose:

  • For gas installations with natural gases (NG) and liquefied gases (LPG)

Characteristics:

  • Marked in yellow
  • Leaky if unpressed
  • Plain end

Scope of delivery:

  • Seal rings HNBR yellow

Material: Stainless Cr-Ni-Mo steel 1.4401 BS 316

Temperature range during operation: -20 - +70 °C

Angle: 90°

Download the installation instructions: Geberit Mapress system

d H L Z
mm cm cm cm
54 11,1 10 6,5
Photo Draft
Photo Geberit Mapress Stainless Steel bend 45°, gas, d 35 [Code number: 34193] Draft Geberit Mapress Stainless Steel bend 45°, gas, d 35 [Code number: 34193]
Geberit Mapress Stainless Steel bend 45°, gas, d 35 [Code number: 34193]
Details 		34193

ATTENTION! This product is temporarily unavailable for order!

Application purpose:

  • For gas installations with natural gases (NG) and liquefied gases (LPG)

Characteristics:

  • Marked in yellow
  • Leaky if unpressed

Scope of delivery:

  • Seal rings HNBR yellow

Technical data

Material: Stainless Cr-Ni-Mo steel 1.4401 BS 316

Temperature range during operation: -20 - +70 °C

Angle: 45°

Download the installation instructions: Geberit Mapress system

d L Z
mm cm cm
35 4,3 1,7
Photo Draft
Photo Geberit Mapress Stainless Steel bend 45°, gas, d 42 [Code number: 34194] Draft Geberit Mapress Stainless Steel bend 45°, gas, d 42 [Code number: 34194]
Geberit Mapress Stainless Steel bend 45°, gas, d 42 [Code number: 34194]
Details 		34194

ATTENTION! This product is temporarily unavailable for order!

Application purpose:

  • For gas installations with natural gases (NG) and liquefied gases (LPG)

Characteristics:

  • Marked in yellow
  • Leaky if unpressed

Scope of delivery:

  • Seal rings HNBR yellow

Material: Stainless Cr-Ni-Mo steel 1.4401 BS 316

Temperature range during operation: -20 - +70 °C

Angle: 45°

Download the installation instructions: Geberit Mapress system

d L Z
mm cm cm
42 5,1 2,1
Photo Draft
Photo Geberit Mapress Stainless Steel bend 45°, gas, d 54 [Code number: 34195] Draft Geberit Mapress Stainless Steel bend 45°, gas, d 54 [Code number: 34195]
Geberit Mapress Stainless Steel bend 45°, gas, d 54 [Code number: 34195]
Details 		34195

ATTENTION! This product is temporarily unavailable for order!

Application purpose:

  • For gas installations with natural gases (NG) and liquefied gases (LPG)

Characteristics:

  • Marked in yellow
  • Leaky if unpressed

Scope of delivery:

  • Seal rings HNBR yellow

Material: Stainless Cr-Ni-Mo steel 1.4401 BS 316

Temperature range during operation: -20 - +70 °C

Angle: 45°

Download the installation instructions: Geberit Mapress system

d L Z
mm cm cm
54 6,2 2,7
Photo Draft
Photo Geberit Mapress Stainless Steel bend 45° with plain end, gas, d 35 [Code number: 34196] Draft Geberit Mapress Stainless Steel bend 45° with plain end, gas, d 35 [Code number: 34196]
Geberit Mapress Stainless Steel bend 45° with plain end, gas, d 35 [Code number: 34196]
Details 		34196 (G)

ATTENTION! This product is temporarily unavailable for order!

Application purpose:

  • For gas installations with natural gases (NG) and liquefied gases (LPG)

Characteristics:

  • Marked in yellow
  • Leaky if unpressed
  • Plain end

Scope of delivery:

  • Seal rings HNBR yellow

Technical data

Material: Stainless Cr-Ni-Mo steel 1.4401 BS 316

Temperature range during operation: -20 - +70 °C

Angle: 45°

Download the installation instructions: Geberit Mapress system

d H L Z
mm cm cm cm
35 5,3 4,3 1,7
Photo Draft
Photo Geberit Mapress Stainless Steel bend 45° with plain end, gas, d 42 [Code number: 34197] Draft Geberit Mapress Stainless Steel bend 45° with plain end, gas, d 42 [Code number: 34197]
Geberit Mapress Stainless Steel bend 45° with plain end, gas, d 42 [Code number: 34197]
Details 		34197

ATTENTION! This product is temporarily unavailable for order!

Application purpose:

  • For gas installations with natural gases (NG) and liquefied gases (LPG)

Characteristics:

  • Marked in yellow
  • Leaky if unpressed
  • Plain end

Scope of delivery:

  • Seal rings HNBR yellow

Material: Stainless Cr-Ni-Mo steel 1.4401 BS 316

Temperature range during operation: -20 - +70 °C

Angle: 45°

Download the installation instructions: Geberit Mapress system

d H L Z
mm cm cm cm
42 6,1 5,1 2,1
Photo Draft
Photo Geberit Mapress Stainless Steel bend 45° with plain end, gas, d 54 [Code number: 34198] Draft Geberit Mapress Stainless Steel bend 45° with plain end, gas, d 54 [Code number: 34198]
Geberit Mapress Stainless Steel bend 45° with plain end, gas, d 54 [Code number: 34198]
Details 		34198

ATTENTION! This product is temporarily unavailable for order!

Application purpose:

  • For gas installations with natural gases (NG) and liquefied gases (LPG)

Characteristics:

  • Marked in yellow
  • Leaky if unpressed
  • Plain end

Scope of delivery:

  • Seal rings HNBR yellow

Material: Stainless Cr-Ni-Mo steel 1.4401 BS 316

Temperature range during operation: -20 - +70 °C

Angle: 45°

Download the installation instructions: Geberit Mapress system

d H L Z
mm cm cm cm
54 7,3 6,2 2,7
Photo Draft
Photo Geberit Mapress Stainless Steel Flange, gas, PN 10/16, with pressing socket, d 22 [Code number: 34204] Draft Geberit Mapress Stainless Steel Flange, gas, PN 10/16, with pressing socket, d 22 [Code number: 34204]
Geberit Mapress Stainless Steel Flange, gas, PN 10/16, with pressing socket, d 22 [Code number: 34204]
Details 		34204

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For natural and liquefied gases

Characteristics:

  • Pressing indicator
  • Leaky if unpressed
  • Marked in yellow
  • Seal ring made of HNBR, yellow
  • Pressing socket with transparent protection plug
  • Design B1 (raised sealing strip with standard sealing strip), EN 1092-1

Material: CrNiMo steel 1.4401 (EN 10088)

Download the installation instructions: Geberit Mapress system

d di D k m L l Z n PN
mm mm cm mm mm cm cm cm pc. bar
22 19 11.5 85 14 6.1 1.8 4 4 10 / 16
© Inrusstrade.ru 1999-2026. "Inrusstrade" Ltd. Copying and quoting is prohibited