Logo
Ru| En

Fittings for gas supply

Home→ Catalog→ Gas supply systems→ Fittings for gas supply

Gas fittings must meet special requirements:

  • be as tight as possible - any slightest gas leak can lead to serious consequences, for example, accidents and poisoning;
  • withstand pressure drops;
  • withstand pressure up to 2.3 MPa;
  • have increased resistance to corrosion from the outside.

All fittings presented in this section meet these requirements.

Photo Name Article Price
Photo Draft
Photo [NO LONGER PRODUCED. REPLACEMENT: 23938] - Geberit Mapress Carbon Steel axial expansion fitting with pressing sockets, d 54 [Code number: 23928] Draft [NO LONGER PRODUCED. REPLACEMENT: 23938] - Geberit Mapress Carbon Steel axial expansion fitting with pressing sockets, d 54 [Code number: 23928]
[NO LONGER PRODUCED. REPLACEMENT: 23938] - Geberit Mapress Carbon Steel axial expansion fitting with pressing sockets, d 54 [Code number: 23928]
Details 		23928

ATTENTION! This product is temporarily unavailable for order!

Application purpose:

  • Not suitable for drinking water

Characteristics:

  • Leaky if unpressed
  • Stainless steel bellows

Scope of delivery:

  • Seal rings CIIR black

Download the installation instructions: Installation of Geberit Mapress Geberit Mapress system

d D La L
mm cm cm cm
54 7,2 +/- 1,4 17,6
Photo Draft
Photo [NO LONGER PRODUCED] - Geberit Mapress Carbon Steel axial expansion fitting with pressing sockets, d76,1 [Code number: 23929] Draft [NO LONGER PRODUCED] - Geberit Mapress Carbon Steel axial expansion fitting with pressing sockets, d76,1 [Code number: 23929]
[NO LONGER PRODUCED] - Geberit Mapress Carbon Steel axial expansion fitting with pressing sockets, d76,1 [Code number: 23929]
Details 		23929

ATTENTION! This product is temporarily unavailable for order!

Application purpose:

  • Not suitable for drinking water

Characteristics:

  • Leaky if unpressed
  • Stainless steel bellows

Scope of delivery:

  • Seal rings CIIR black

Download the installation instructions: Installation of Geberit Mapress Geberit Mapress system

d D La L
mm cm cm cm
76,1 9,4 +/- 2,2 26,2
Photo Draft
Photo [NO LONGER PRODUCED] - Geberit Mapress Carbon Steel axial expansion fitting with pressing sockets, d88,9 [Code number: 23930] Draft [NO LONGER PRODUCED] - Geberit Mapress Carbon Steel axial expansion fitting with pressing sockets, d88,9 [Code number: 23930]
[NO LONGER PRODUCED] - Geberit Mapress Carbon Steel axial expansion fitting with pressing sockets, d88,9 [Code number: 23930]
Details 		23930

ATTENTION! This product is temporarily unavailable for order!

Application purpose:

  • Not suitable for drinking water

Characteristics:

  • Leaky if unpressed
  • Stainless steel bellows

Scope of delivery:

  • Seal rings CIIR black

Download the installation instructions: Installation of Geberit Mapress Geberit Mapress system

d D La L
mm cm cm cm
88,9 10,5 +/- 2,3 28,6
Photo Draft
Photo [NO LONGER PRODUCED] - Geberit Mapress Carbon Steel axial expansion fitting with pressing sockets, d108 [Code number: 23931] Draft [NO LONGER PRODUCED] - Geberit Mapress Carbon Steel axial expansion fitting with pressing sockets, d108 [Code number: 23931]
[NO LONGER PRODUCED] - Geberit Mapress Carbon Steel axial expansion fitting with pressing sockets, d108 [Code number: 23931]
Details 		23931

ATTENTION! This product is temporarily unavailable for order!

Application purpose:

  • Not suitable for drinking water

Characteristics:

  • Leaky if unpressed
  • Stainless steel bellows

Scope of delivery:

  • Seal rings CIIR black

Download the installation instructions: Installation of Geberit Mapress Geberit Mapress system

d D La L
mm cm cm cm
108 13,6 +/- 2,3 54,2
Photo Draft
Photo [NO LONGER PRODUCED] - Geberit union connector for Euro cone, d 15-G 3/4" [Code number: 25072] Draft [NO LONGER PRODUCED] - Geberit union connector for Euro cone, d 15-G 3/4" [Code number: 25072]
[NO LONGER PRODUCED] - Geberit union connector for Euro cone, d 15-G 3/4" [Code number: 25072]
Details 		25072

ATTENTION! This product is temporarily unavailable for order!

Application Purpose

  • For copper pipes blank, nickel-plated and chrome-plated
  • For Mapress Carbon Steel system pipes
  • For Mapress Stainless Steel 1.4401 system pipes
  • For manifolds and radiator valves to Euro cone G3/4"
  • Not suitable for drinking water

Characteristics

  • Union nut nickel-plated
d G
mm ''
15 3/4
Photo Draft
Photo [NO LONGER PRODUCED. REPLACEMENT: 30089] - Geberit Mapress Stainless Steel bend 90° with plain ends, d76,1 (old) [Code number: 30409] Draft [NO LONGER PRODUCED. REPLACEMENT: 30089] - Geberit Mapress Stainless Steel bend 90° with plain ends, d76,1 (old) [Code number: 30409]
[NO LONGER PRODUCED. REPLACEMENT: 30089] - Geberit Mapress Stainless Steel bend 90° with plain ends, d76,1 (old) [Code number: 30409]
Details 		30409

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For drinking water and industrial applications
  • For heating installations

Material: CrNiMo steel 1.4401 (EN 10088)

Angle: 90°

d H H1 K K1
mm cm cm cm cm
76,1 25 25 6,2 6,2
Photo Draft
Photo [NO LONGER PRODUCED. REPLACEMENT: 30090] - Geberit Mapress Stainless Steel bend 90° with plain ends, d88,9 (old) [Code number: 30410] Draft [NO LONGER PRODUCED. REPLACEMENT: 30090] - Geberit Mapress Stainless Steel bend 90° with plain ends, d88,9 (old) [Code number: 30410]
[NO LONGER PRODUCED. REPLACEMENT: 30090] - Geberit Mapress Stainless Steel bend 90° with plain ends, d88,9 (old) [Code number: 30410]
Details 		30410

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For drinking water and industrial applications
  • For heating installations

Material: CrNiMo steel 1.4401 (EN 10088)

Angle: 90°

d H H1 K K1
mm cm cm cm cm
88,9 29,1 29,1 9 9
Photo Draft
Photo [NO LONGER PRODUCED. REPLACEMENT: 30091] - Geberit Mapress Stainless Steel bend 90° with plain end, d108 (old) [Code number: 30411] Draft [NO LONGER PRODUCED. REPLACEMENT: 30091] - Geberit Mapress Stainless Steel bend 90° with plain end, d108 (old) [Code number: 30411]
[NO LONGER PRODUCED. REPLACEMENT: 30091] - Geberit Mapress Stainless Steel bend 90° with plain end, d108 (old) [Code number: 30411]
Details 		30411

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For drinking water and industrial applications
  • For heating installations

Material: CrNiMo steel 1.4401 (EN 10088)

Angle: 90°

d H H1 K K1
mm cm cm cm cm
108 36,4 36,4 4,5 4,5
Photo Draft
Photo [NO LONGER PRODUCED. REPLACEMENT: 30049] - Geberit Mapress Stainless Steel bend 45° with plain ends, d76,1 (old) [Code number: 30879] Draft [NO LONGER PRODUCED. REPLACEMENT: 30049] - Geberit Mapress Stainless Steel bend 45° with plain ends, d76,1 (old) [Code number: 30879]
[NO LONGER PRODUCED. REPLACEMENT: 30049] - Geberit Mapress Stainless Steel bend 45° with plain ends, d76,1 (old) [Code number: 30879]
Details 		30879

ATTENTION! This product is temporarily unavailable for order!

Application purposes

  • For sanitary and industrial applications
  • For heating installations
  • For gas installations with natural gases (NG) and liquefied gases (LPG)

Material: CrNiMo steel 1.4401 (EN 10088)

Angle: 45°

d H H1 K K1
mm cm cm cm cm
76,1 22,5 22,5 6,9 6,9
Photo Draft
Photo [NO LONGER PRODUCED. REPLACEMENT: 30050] - Geberit Mapress Stainless Steel bend with plain ends 45°, d88,9 (old) [Code number: 30880] Draft [NO LONGER PRODUCED. REPLACEMENT: 30050] - Geberit Mapress Stainless Steel bend with plain ends 45°, d88,9 (old) [Code number: 30880]
[NO LONGER PRODUCED. REPLACEMENT: 30050] - Geberit Mapress Stainless Steel bend with plain ends 45°, d88,9 (old) [Code number: 30880]
Details 		30880

ATTENTION! This product is temporarily unavailable for order!

Application purposes

  • For sanitary and industrial applications
  • For heating installations
  • For gas installations with natural gases (NG) and liquefied gases (LPG)

Technical data

Material: CrNiMo steel 1.4401 (EN 10088)

Angle: 45°

d H H1 K K1
mm cm cm cm cm
88,9 26,7 26,7 10,3 10,3
Photo Draft
Photo [NO LONGER PRODUCED. REPLACEMENT: 30051] - Geberit Mapress Stainless Steel bend 45° with plain ends, d108 (old) [Code number: 30881] Draft [NO LONGER PRODUCED. REPLACEMENT: 30051] - Geberit Mapress Stainless Steel bend 45° with plain ends, d108 (old) [Code number: 30881]
[NO LONGER PRODUCED. REPLACEMENT: 30051] - Geberit Mapress Stainless Steel bend 45° with plain ends, d108 (old) [Code number: 30881]
Details 		30881

ATTENTION! This product is temporarily unavailable for order!

Application purposes

  • For sanitary and industrial applications
  • For heating installations
  • For gas installations with natural gases (NG) and liquefied gases (LPG)

Material: CrNiMo steel 1.4401 (EN 10088)

Angle: 45°

d H H1 K K1
mm cm cm cm cm
108 29,3 29,3 6,6 6,6
Photo Draft
Photo [NO LONGER PRODUCED. REPLACEMENT: 30009] - Geberit Mapress Stainless Steel bend 15° with plain ends, d76,1 (old) [Code number: 30909] Draft [NO LONGER PRODUCED. REPLACEMENT: 30009] - Geberit Mapress Stainless Steel bend 15° with plain ends, d76,1 (old) [Code number: 30909]
[NO LONGER PRODUCED. REPLACEMENT: 30009] - Geberit Mapress Stainless Steel bend 15° with plain ends, d76,1 (old) [Code number: 30909]
Details 		30909

ATTENTION! This product is temporarily unavailable for order!

Application purposes

  • For sanitary and industrial applications
  • For heating installations
  • For gas installations with natural gases (NG) and liquefied gases (LPG)

Material: CrNiMo steel 1.4401 (EN 10088)

Angle: 15°

d H H1 K K1
mm cm cm cm cm
76,1 22,8 22,8 6,5 6,5
Photo Draft
Photo [NO LONGER PRODUCED. REPLACEMENT: 30010] - Geberit Mapress Stainless Steel bend 15° with plain ends, d88,9 (old) [Code number: 30910] Draft [NO LONGER PRODUCED. REPLACEMENT: 30010] - Geberit Mapress Stainless Steel bend 15° with plain ends, d88,9 (old) [Code number: 30910]
[NO LONGER PRODUCED. REPLACEMENT: 30010] - Geberit Mapress Stainless Steel bend 15° with plain ends, d88,9 (old) [Code number: 30910]
Details 		30910

ATTENTION! This product is temporarily unavailable for order!

Application purposes

  • For sanitary and industrial applications
  • For heating installations
  • For gas installations with natural gases (NG) and liquefied gases (LPG)

Material: CrNiMo steel 1.4401 (EN 10088)

Angle: 15°

d H H1 K K1
mm cm cm cm cm
88,9 24 24 8 8
Photo Draft
Photo [NO LONGER PRODUCED. REPLACEMENT: 30011] - Geberit Mapress CuNiFe bend 15°, FKM, d108 (old) [Code number: 30911] Draft [NO LONGER PRODUCED. REPLACEMENT: 30011] - Geberit Mapress CuNiFe bend 15°, FKM, d108 (old) [Code number: 30911]
[NO LONGER PRODUCED. REPLACEMENT: 30011] - Geberit Mapress CuNiFe bend 15°, FKM, d108 (old) [Code number: 30911]
Details 		30911

ATTENTION! This product is temporarily unavailable for order!

Application purposes

  • For sanitary and industrial applications
  • For heating installations
  • For gas installations with natural gases (NG) and liquefied gases (LPG)

Material: CrNiMo steel 1.4401 (EN 10088)

Angle: 15°

d H H1 K K1
mm cm cm cm cm
108 24,9 24,9 9,5 9,5
Photo Draft
Photo [NO LONGER PRODUCED. REPLACEMENT: 30029] - Geberit Mapress Stainless Steel bend 30° with plain ends, d76,1 (old) [Code number: 30939] Draft [NO LONGER PRODUCED. REPLACEMENT: 30029] - Geberit Mapress Stainless Steel bend 30° with plain ends, d76,1 (old) [Code number: 30939]
[NO LONGER PRODUCED. REPLACEMENT: 30029] - Geberit Mapress Stainless Steel bend 30° with plain ends, d76,1 (old) [Code number: 30939]
Details 		30939

ATTENTION! This product is temporarily unavailable for order!

Application purposes

  • For sanitary and industrial applications
  • For heating installations
  • For gas installations with natural gases (NG) and liquefied gases (LPG)

Material: CrNiMo steel 1.4401 (EN 10088)

Angle: 30°

d H H1 K K1
mm cm cm cm cm
76,1 20,1 20,1 6,6 6,6
Photo Draft
Photo [NO LONGER PRODUCED] - Geberit Mapress Stainless Steel bend 30° with plain ends, d88,9 (old) [Code number: 30940] Draft [NO LONGER PRODUCED] - Geberit Mapress Stainless Steel bend 30° with plain ends, d88,9 (old) [Code number: 30940]
[NO LONGER PRODUCED] - Geberit Mapress Stainless Steel bend 30° with plain ends, d88,9 (old) [Code number: 30940]
Details 		30940

ATTENTION! This product is temporarily unavailable for order!

Application purposes

  • For sanitary and industrial applications
  • For heating installations
  • For gas installations with natural gases (NG) and liquefied gases (LPG)

Material: CrNiMo steel 1.4401 (EN 10088)

Angle: 30°

d H H1 K K1
mm cm cm cm cm
88,9 24,1 24,1 8 8
Photo Draft
Photo [NO LONGER PRODUCED. REPLACEMENT: 30031] - Geberit Mapress CuNiFe bend 30°, FKM, d108 (old) [Code number: 30941 (G)] Draft [NO LONGER PRODUCED. REPLACEMENT: 30031] - Geberit Mapress CuNiFe bend 30°, FKM, d108 (old) [Code number: 30941 (G)]
[NO LONGER PRODUCED. REPLACEMENT: 30031] - Geberit Mapress CuNiFe bend 30°, FKM, d108 (old) [Code number: 30941 (G)]
Details 		30941 (G)

ATTENTION! This product is temporarily unavailable for order!

Application purposes

  • For sanitary and industrial applications
  • For heating installations
  • For gas installations with natural gases (NG) and liquefied gases (LPG)

Technical data

Material: CrNiMo steel 1.4401 (EN 10088)

Angle: 30°

d H H1 K K1
mm cm cm cm cm
108 26,3 26,3 9,5 9,5
Photo Draft
Photo [NO LONGER PRODUCED. REPLACEMENT: 30069] - Geberit Mapress Stainless Steel bend 60° with plain ends, d76,1 (old) [Code number: 30959] Draft [NO LONGER PRODUCED. REPLACEMENT: 30069] - Geberit Mapress Stainless Steel bend 60° with plain ends, d76,1 (old) [Code number: 30959]
[NO LONGER PRODUCED. REPLACEMENT: 30069] - Geberit Mapress Stainless Steel bend 60° with plain ends, d76,1 (old) [Code number: 30959]
Details 		30959

ATTENTION! This product is temporarily unavailable for order!

Application purposes

  • For sanitary and industrial applications
  • For heating installations
  • For gas installations with natural gases (NG) and liquefied gases (LPG)

Material: CrNiMo steel 1.4401 (EN 10088)

Angle: 60°

d H H1 K K1
mm cm cm cm cm
76,1 21,5 21,5 6,5 6,5
Photo Draft
Photo [NO LONGER PRODUCED. REPLACEMENT: 30070] - Geberit Mapress Stainless Steel bend 60° with plain ends, d88,9 (old) [Code number: 30960] Draft [NO LONGER PRODUCED. REPLACEMENT: 30070] - Geberit Mapress Stainless Steel bend 60° with plain ends, d88,9 (old) [Code number: 30960]
[NO LONGER PRODUCED. REPLACEMENT: 30070] - Geberit Mapress Stainless Steel bend 60° with plain ends, d88,9 (old) [Code number: 30960]
Details 		30960

ATTENTION! This product is temporarily unavailable for order!

Application purposes

  • For sanitary and industrial applications
  • For heating installations
  • For gas installations with natural gases (NG) and liquefied gases (LPG)

Material: CrNiMo steel 1.4401 (EN 10088)

Angle: 60°

d H H1 K K1
mm cm cm cm cm
88,9 25,6 25,6 8 8
Photo Draft
Photo [NO LONGER PRODUCED. REPLACEMENT: 30071] - Geberit Mapress CuNiFe bend 60°, d108 (old) [Code number: 30961] Draft [NO LONGER PRODUCED. REPLACEMENT: 30071] - Geberit Mapress CuNiFe bend 60°, d108 (old) [Code number: 30961]
[NO LONGER PRODUCED. REPLACEMENT: 30071] - Geberit Mapress CuNiFe bend 60°, d108 (old) [Code number: 30961]
Details 		30961

ATTENTION! This product is temporarily unavailable for order!

Application purposes

  • For sanitary and industrial applications
  • For heating installations
  • For gas installations with natural gases (NG) and liquefied gases (LPG)

Material: CrNiMo steel 1.4401 (EN 10088)

Angle: 60°

d H H1 K K1
mm cm cm cm cm
108 29,2 29,2 9,5 9,5

© Inrusstrade.ru 1999-2024. "Inrusstrade" Ltd. Copying and quoting is prohibited