Connecting and transition elements for sewerage

Attention! The article is discontinued!

Rehau RAUTITAN fire protection sleeve will prevent smoke and fire arising in the room, move to the next room. It is made of foamed polystyrene.

The fire protection sleeves are suitable for RAUTITAN flex, RAUPEX and RAUTHERM S pipes with diameter of 63 mm.

It consists of two segments, the kit includes two straps for binding.

Rehau RAUTITAN fire protection sleeve is installed in both the horizontal and vertical position.

Purpose of application:

• For domestic and drinking water supply
• For residential and industrial buildings, as well as agricultural enterprises
• For industrial pipelines intended for the transportation of gases and technical liquids, semi-finished products, raw materials, industrial waste and other materials to which PVC-U is chemically resistant
• For vertical internal gutters
• For pressure sewerage (if it is not possible to divert sewage by gravity)

Characteristics:

• High resistance to UV radiation - under the influence of ultraviolet, the physical and mechanical properties of the material do not change;
• Resistance to microorganisms, fungi and bacteria;
• Fast installation;
• Made of uPVC;
• High resistance to alkalis, acids and surfactants;
• The temperature of transported liquids can vary from the freezing point of the effluents themselves to +60 °C (a short-term increase to +95 °C is possible);
• The ignition temperature is +482 ° C - it does not melt, the material is almost non-toxic, does not form burning drops, practically does not emit smoke;
• Refers to the flammability class G1 (GOST 30244-94);
• Warranty period: 2 years from the date of manufacture (if the rules of transportation and storage are observed);
• Service life: up to 100 years.

It is painted in grey.

The working pressure is 1,0 MPa.

Technical characteristics

Documentation

Download: Chemical resistance

Download: Methodological recommendations for project design

Purpose of application:

• For domestic and drinking water supply
• For residential and industrial buildings, as well as agricultural enterprises
• For industrial pipelines intended for the transportation of gases and technical liquids, semi-finished products, raw materials, industrial waste and other materials to which PVC-U is chemically resistant
• For vertical internal gutters
• For pressure sewerage (if it is not possible to divert sewage by gravity)

Characteristics:

• High resistance to UV radiation - under the influence of ultraviolet, the physical and mechanical properties of the material do not change;
• Resistance to microorganisms, fungi and bacteria;
• Fast installation;
• Made of uPVC;
• High resistance to alkalis, acids and surfactants;
• The temperature of transported liquids can vary from the freezing point of the effluents themselves to +60 °C (a short-term increase to +95 °C is possible);
• The ignition temperature is +482 ° C - it does not melt, the material is almost non-toxic, does not form burning drops, practically does not emit smoke;
• Refers to the flammability class G1 (GOST 30244-94);
• Warranty period: 2 years from the date of manufacture (if the rules of transportation and storage are observed);
• Service life: up to 100 years.

It is painted in grey.

The working pressure is 1,0 MPa.

Technical characteristics

Documentation

Download: Chemical resistance

Download: Methodological recommendations for project design

Purpose of application:

• For domestic and drinking water supply
• For residential and industrial buildings, as well as agricultural enterprises
• For industrial pipelines intended for the transportation of gases and technical liquids, semi-finished products, raw materials, industrial waste and other materials to which PVC-U is chemically resistant
• For vertical internal gutters
• For pressure sewerage (if it is not possible to divert sewage by gravity)

Characteristics:

• High resistance to UV radiation - under the influence of ultraviolet, the physical and mechanical properties of the material do not change;
• Resistance to microorganisms, fungi and bacteria;
• Fast installation;
• Made of uPVC;
• High resistance to alkalis, acids and surfactants;
• The temperature of transported liquids can vary from the freezing point of the effluents themselves to +60 °C (a short-term increase to +95 °C is possible);
• The ignition temperature is +482 ° C - it does not melt, the material is almost non-toxic, does not form burning drops, practically does not emit smoke;
• Refers to the flammability class G1 (GOST 30244-94);
• Warranty period: 2 years from the date of manufacture (if the rules of transportation and storage are observed);
• Service life: up to 100 years.

It is painted in grey.

The working pressure is 1,0 MPa.

Technical characteristics

Documentation

Download: Chemical resistance

Download: Methodological recommendations for project design

Purpose of application:

• For domestic and drinking water supply
• For residential and industrial buildings, as well as agricultural enterprises
• For industrial pipelines intended for the transportation of gases and technical liquids, semi-finished products, raw materials, industrial waste and other materials to which PVC-U is chemically resistant
• For vertical internal gutters
• For pressure sewerage (if it is not possible to divert sewage by gravity)

Characteristics:

• High resistance to UV radiation - under the influence of ultraviolet, the physical and mechanical properties of the material do not change;
• Resistance to microorganisms, fungi and bacteria;
• Fast installation;
• Made of uPVC;
• High resistance to alkalis, acids and surfactants;
• The temperature of transported liquids can vary from the freezing point of the effluents themselves to +60 °C (a short-term increase to +95 °C is possible);
• The ignition temperature is +482 ° C - it does not melt, the material is almost non-toxic, does not form burning drops, practically does not emit smoke;
• Refers to the flammability class G1 (GOST 30244-94);
• Warranty period: 2 years from the date of manufacture (if the rules of transportation and storage are observed);
• Service life: up to 100 years.

It is painted in grey.

The working pressure is 1,0 MPa.

Technical characteristics

Documentation

Download: Chemical resistance

Download: Methodological recommendations for project design

Purpose of application:

• For domestic and drinking water supply
• For residential and industrial buildings, as well as agricultural enterprises
• For industrial pipelines intended for the transportation of gases and technical liquids, semi-finished products, raw materials, industrial waste and other materials to which PVC-U is chemically resistant
• For vertical internal gutters
• For pressure sewerage (if it is not possible to divert sewage by gravity)

Characteristics:

• High resistance to UV radiation - under the influence of ultraviolet, the physical and mechanical properties of the material do not change;
• Resistance to microorganisms, fungi and bacteria;
• Fast installation;
• Made of uPVC;
• High resistance to alkalis, acids and surfactants;
• The temperature of transported liquids can vary from the freezing point of the effluents themselves to +60 °C (a short-term increase to +95 °C is possible);
• The ignition temperature is +482 ° C - it does not melt, the material is almost non-toxic, does not form burning drops, practically does not emit smoke;
• Refers to the flammability class G1 (GOST 30244-94);
• Warranty period: 2 years from the date of manufacture (if the rules of transportation and storage are observed);
• Service life: up to 100 years.

It is painted in grey.

The working pressure is 1,0 MPa.

Technical characteristics

Documentation

Download: Chemical resistance

Download: Methodological recommendations for project design

Purpose of application:

• For domestic and drinking water supply
• For residential and industrial buildings, as well as agricultural enterprises
• For industrial pipelines intended for the transportation of gases and technical liquids, semi-finished products, raw materials, industrial waste and other materials to which PVC-U is chemically resistant
• For vertical internal gutters
• For pressure sewerage (if it is not possible to divert sewage by gravity)

Characteristics:

• High resistance to UV radiation - under the influence of ultraviolet, the physical and mechanical properties of the material do not change;
• Resistance to microorganisms, fungi and bacteria;
• Fast installation;
• Made of uPVC;
• High resistance to alkalis, acids and surfactants;
• The temperature of transported liquids can vary from the freezing point of the effluents themselves to +60 °C (a short-term increase to +95 °C is possible);
• The ignition temperature is +482 ° C - it does not melt, the material is almost non-toxic, does not form burning drops, practically does not emit smoke;
• Refers to the flammability class G1 (GOST 30244-94);
• Warranty period: 2 years from the date of manufacture (if the rules of transportation and storage are observed);
• Service life: up to 100 years.

It is painted in grey.

The working pressure is 1,0 MPa.

Technical characteristics

Documentation

Download: Chemical resistance

Download: Methodological recommendations for project design

Purpose of application:

• For domestic and drinking water supply
• For residential and industrial buildings, as well as agricultural enterprises
• For industrial pipelines intended for the transportation of gases and technical liquids, semi-finished products, raw materials, industrial waste and other materials to which PVC-U is chemically resistant
• For vertical internal gutters
• For pressure sewerage (if it is not possible to divert sewage by gravity)

Characteristics:

• High resistance to UV radiation - under the influence of ultraviolet, the physical and mechanical properties of the material do not change;
• Resistance to microorganisms, fungi and bacteria;
• Fast installation;
• Made of uPVC;
• High resistance to alkalis, acids and surfactants;
• The temperature of transported liquids can vary from the freezing point of the effluents themselves to +60 °C (a short-term increase to +95 °C is possible);
• The ignition temperature is +482 ° C - it does not melt, the material is almost non-toxic, does not form burning drops, practically does not emit smoke;
• Refers to the flammability class G1 (GOST 30244-94);
• Warranty period: 2 years from the date of manufacture (if the rules of transportation and storage are observed);
• Service life: up to 100 years.

It is painted in grey.

The working pressure is 1,0 MPa.

Technical characteristics

Documentation

Download: Chemical resistance

Download: Methodological recommendations for project design

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

• For pipe feed-throughs 0°–90° in wall or ceiling
• For installation in ceilings and walls with fire resistance F 30 to F 90, partly or completely mortared in place
• For inclined installation in ceilings and walls of fire resistance class F 30 to F 90, partly or completely mortared in place
• For later installation in ceilings and walls with fire resistance class F 30 to F 90
• For protection against the spread of smoke and fire

Characteristics:

• Fire resistance class R 30, R 60 and R 90 in accordance with DIN 4102-11
• Sound-absorbing
• National technical approval no. Z-19.17-1927

Scope of delivery

• Concrete screws
• Structure-borne sound insulation
• Adhesive strip
• Information sign

Material: Stainless steel

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

• For pipe feed-throughs 0°–90° in wall or ceiling
• For installation in ceilings and walls with fire resistance F 30 to F 90, partly or completely mortared in place
• For inclined installation in ceilings and walls of fire resistance class F 30 to F 90, partly or completely mortared in place
• For later installation in ceilings and walls with fire resistance class F 30 to F 90
• For protection against the spread of smoke and fire

Characteristics:

• Fire resistance class R 30, R 60 and R 90 in accordance with DIN 4102-11
• Sound-absorbing
• National technical approval no. Z-19.17-1927

Scope of delivery:

• Concrete screws
• Structure-borne sound insulation
• Adhesive strip
• Information sign

Material: Stainless steel

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

• For pipe feed-throughs 0°–90° in wall or ceiling
• For installation in ceilings and walls with fire resistance F 30 to F 90, partly or completely mortared in place
• For inclined installation in ceilings and walls of fire resistance class F 30 to F 90, partly or completely mortared in place
• For later installation in ceilings and walls with fire resistance class F 30 to F 90
• For protection against the spread of smoke and fire

Characteristics:

• Fire resistance class R 30, R 60 and R 90 in accordance with DIN 4102-11
• Sound-absorbing
• National technical approval no. Z-19.17-1927

Scope of delivery:

• Concrete screws
• Structure-borne sound insulation
• Adhesive strip
• Information sign

Material: Stainless steel

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

• For pipe feed-throughs 0°–90° in wall or ceiling
• For installation in ceilings and walls with fire resistance F 30 to F 90, partly or completely mortared in place
• For inclined installation in ceilings and walls of fire resistance class F 30 to F 90, partly or completely mortared in place
• For later installation in ceilings and walls with fire resistance class F 30 to F 90
• For protection against the spread of smoke and fire

Characteristics:

• Fire resistance class R 30, R 60 and R 90 in accordance with DIN 4102-11
• Sound-absorbing
• National technical approval no. Z-19.17-1927

Scope of delivery:

• Concrete screws
• Structure-borne sound insulation
• Adhesive strip
• Information sign

Material: Stainless steel

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

• For pipe feed-throughs 0°–90° in wall or ceiling
• For installation in ceilings and walls with fire resistance F 30 to F 90, partly or completely mortared in place
• For inclined installation in ceilings and walls of fire resistance class F 30 to F 90, partly or completely mortared in place
• For later installation in ceilings and walls with fire resistance class F 30 to F 90
• For protection against the spread of smoke and fire

Characteristics:

• Fire resistance class R 30, R 60 and R 90 in accordance with DIN 4102-11
• Sound-absorbing
• National technical approval no. Z-19.17-1927

Scope of delivery:

• Concrete screws
• Structure-borne sound insulation
• Adhesive strip
• Information sign

Material: Stainless steel

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

• For pipe feed-throughs 0°–90° in wall or ceiling
• For installation in ceilings and walls with fire resistance F 30 to F 90, partly or completely mortared in place
• For inclined installation in ceilings and walls of fire resistance class F 30 to F 90, partly or completely mortared in place
• For later installation in ceilings and walls with fire resistance class F 30 to F 90
• For protection against the spread of smoke and fire

Characteristics:

• Fire resistance class R 30, R 60 and R 90 in accordance with DIN 4102-11
• Sound-absorbing
• National technical approval no. Z-19.17-1927

Scope of delivery:

• Concrete screws
• Structure-borne sound insulation
• Adhesive strip
• Information sign

Material: Stainless steel

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

• For pipe feed-throughs 0°–90° in wall or ceiling
• For installation in ceilings and walls with fire resistance F 30 to F 90, partly or completely mortared in place
• For inclined installation in ceilings and walls of fire resistance class F 30 to F 90, partly or completely mortared in place
• For later installation in ceilings and walls with fire resistance class F 30 to F 90
• For protection against the spread of smoke and fire

Characteristics:

• Fire resistance class R 30, R 60 and R 90 in accordance with DIN 4102-11
• Sound-absorbing
• National technical approval no. Z-19.17-1927

Scope of delivery:

• Concrete screws
• Structure-borne sound insulation
• Adhesive strip
• Information sign

Material: Stainless steel

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

• For pipe feed-throughs 0°–90° in wall or ceiling
• For discharge pipes with pipe dimensions ø 40–200 mm
• For direct installation in ceilings, drywalls or solid walls in new installations
• For later installation in ceilings, drywalls and solid walls
• For protection against the spread of smoke and fire
• Not suitable for passing other parts or aids through

Characteristics:

• Sound-absorbing
• Approval in accordance with EN
• Fire resistance class S 90, R 90, EI 90

Scope of delivery:

• Concrete screws
• Structure-borne sound insulation
• Adhesive strip

Material: Steel

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

• For pipe feed-throughs 0°–90° in wall or ceiling
• For discharge pipes with pipe dimensions ø 40–200 mm
• For direct installation in ceilings, drywalls or solid walls in new installations
• For later installation in ceilings, drywalls and solid walls
• For protection against the spread of smoke and fire
• Not suitable for passing other parts or aids through

Characteristics:

• Sound-absorbing
• Approval in accordance with EN
• Fire resistance class S 90, R 90, EI 90

Scope of delivery:

• Concrete screws
• Structure-borne sound insulation
• Adhesive strip

Material: Steel

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

• For pipe feed-throughs 0°–90° in wall or ceiling
• For discharge pipes with pipe dimensions ø 40–200 mm
• For direct installation in ceilings, drywalls or solid walls in new installations
• For later installation in ceilings, drywalls and solid walls
• For protection against the spread of smoke and fire
• Not suitable for passing other parts or aids through

Characteristics:

• Sound-absorbing
• Approval in accordance with EN
• Fire resistance class S 90, R 90, EI 90

Scope of delivery:

• Concrete screws
• Structure-borne sound insulation
• Adhesive strip

Material: Steel

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

• For pipe feed-throughs 0°–90° in wall or ceiling
• For discharge pipes with pipe dimensions ø 40–200 mm
• For direct installation in ceilings, drywalls or solid walls in new installations
• For later installation in ceilings, drywalls and solid walls
• For protection against the spread of smoke and fire
• Not suitable for passing other parts or aids through

Characteristics:

• Sound-absorbing
• Approval in accordance with EN
• Fire resistance class S 90, R 90, EI 90

Scope of delivery:

• Concrete screws
• Structure-borne sound insulation
• Adhesive strip

Material: Steel

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

• For pipe feed-throughs 0°–90° in wall or ceiling
• For discharge pipes with pipe dimensions ø 40–200 mm
• For direct installation in ceilings, drywalls or solid walls in new installations
• For later installation in ceilings, drywalls and solid walls
• For protection against the spread of smoke and fire
• Not suitable for passing other parts or aids through

Characteristics:

• Sound-absorbing
• Approval in accordance with EN
• Fire resistance class S 90, R 90, EI 90

Scope of delivery:

• Concrete screws
• Structure-borne sound insulation
• Adhesive strip

Material: Steel