Tool

Rehau expander head is designed for RO expander. For pipes in size 25х2,3.

You can see the appearance of the expander head in the photo.

Weight: 0,180 kg.

Hydraulic-mechanical tool RAUTOOL H2 is suited for the installation of REHAU piping systems REHAU, it can be used in areas without electricity.

The advantages of using the installation tool RAUTOOL H2:

• Due to the double compression jaw, two dimensions can be processed without alteration;
• Easy to install even in tight spots due to the compact design and the ergonomic joint to the compression cylinder;
• Big lift cylinder increases the speed of operation;
• Foot pump is equipped with two-way mechanism drain valve, so that RAUTOOL H2 more convenient to use;
• The tool can be used for the installation of pipes with diameter of 16-40 mm;
• Tool RAUTOOL H2 is robust and durable;
• Maintenance-free;
• Easy to operate.

The kit includes:

• Tool RAUTOOL H2:
• Hydraulic hose 3.5 m;
• 2 mounting pins;
• REHAU 40 stabil pipe cutter;
• Expanding pliers RO;
• Cleaning brush;
• Lubricant;
• Transport case;
• Operating instructions.

If necessary, the kit RAUTOOL H2 can be supplemented with the following expansion sets and accessories:

• RAUTITAN stabil 16 - 32 expansion set, RAUTITAN flex 16 - 32 expansion set and RAUTITAN flex 40 expansion set;
• Single and double compression jaws;
• Internal spiral spring for RAUTITAN stabil pipe;
• Expander bits for expanding pipes;
• Pipe shears for cutting pipes.

Battery-hydraulic tool RAUTOOL A3 is used for installation of REHAU pipes which are connected by compression sleeves. It can be used with pipes and fittings DN12-40. There is a built-in flashlight.

Technical data

Maximum operating pressure: 450 bar.

Maximum shearing force: 18 kN (linear).

Battery type: lithium-ion.

Battery capacity: 18 V / 3.0 Ah.

Compressions with one battery charge: over 200.

Battery charge time: approx. 22 minutes.

Mains voltage for charging: 230 V / 50 Hz.

Ambient temperature: from -10°С to +45°С.

Weight: 4 kg (tool and battery).

The kit includes:

• Tool RAUTOOL A3;
• 2 dowels;
• Charging station 230V;
• Lithium-ion battery, 18 V / 3 Ah;
• REHAU 40 stabil pipe cutter;
• Expanding Pliers RO;
• Lubricant;
• Cleaning brush;
• Transport case;
• Operating instructions.

The RAUTOOL A3 kit can be supplemented with the following expansion sets and accessories:

• Expander heads for manual expansion of pipes;
• Expander heads for hydraulic expansion of pipes;
• Spare battery;
• Network adapter which is used to connect the tool to the network;
• Internal spiral spring for RAUTITAN stabil pipe;
• Pipe shears for cutting of pipes.

Electro-hydraulic tool RAUTOOL G2 kit is suitable for the installation of REHAU pipe systems with diameters of 50-63 mm.

The kit includes:

• Tool RAUTOOL G2;
• Set of compression jaws G1 50 and G1 63 (for SDR 7,4 and SDR 11);
• Pipe cutters 63;
• Cleaning brush;
• Burr remover;
• Transport case;
• Operating instructions.

Spare battery charger 230V is intended for tools RAUTOOL A-light2 / A3 / E3 / G2 / Xpand. There is a plug EU, EN 50075 standard.

Spare battery is designed specially for tools RAUTOOL A-light2/ A3 /E3 /G2 / Xpand.

You can see the appearance of the battery in the photo.

Rehau mains adapter is designed for tools RAUTOOL А3, G2, A-light2, Xpand.

Spare battery REHAU may be required in cases when the battery, included in the basic equipment of the REHAU tool, can not be used. The spare battery is suitable for installation tools RAUTOOL A-light2 / A3 / E3 / G2 / Xpand.

You can see the appearance of the battery in the photo.

Application:

• For pipes made of cross-linked polyethylene

Set of compression jaws and expander head is used for mounting of polymer and metal-polymer pipes with compression sleeves. ehau G XL electro-hydraulic rechargeable battery is required for mounting.

It is suitable for pipes with diameter 125/160 mm.

Application:

• For pipes made of cross-linked polyethylene

The set includes:

• Hydraulic tool with lithium-ion battery;
• Cylinder G with hydraulic hose 4 m long;
• Cylinder E3 with hydraulic hose length of 4 m;
• Expansion tip;
• Expansion heads G2 50x4,6 and 63x5,8;
• Expander heads (diameters 125 and 160 mm);
• Compression jaws set G1 50 and G1 63;
• Expansion heads 20 x 1.9; 25 x 2.3; 32 x 2.9;
• Expander 40x3,7;
• Compression jaws set 20/25 + 32/40;
• Charger;
• Pipe shears 40 and 63 mm;
• Tool for deburring;
• RO Expander;
• Suitcase.

Application:

• For pipes made of cross-linked polyethylene

Set of compression jaws and expander head is used for mounting of polymer and metal-polymer pipes with compression sleeves. ehau G XL electro-hydraulic rechargeable battery is required for mounting.

It is suitable for pipes with diameter 140x12.7 mm.

Weight: 17 kg.

Attention! The article is discontinued!

Hydraulic expander tool RAUTOOL Xpand is equipped with a battery, it is used for installing the REHAU pipes.The expander tool is used for installation of pipes with diameters of 16-40 mm.

The kit uncludes:

• Tool RAUTOOL Xpand;
• Lithium-ion battery;
• Lubricant;
• Cleaning brush.

Case is designed for the transportation of installation tool RAUTOOL Xpand and its accessories.

You can see the appearance of the battery in the photo.

Set of terminal screws for fastening pipe joints using electro-welded couplings. The range in diameter from 20 to 63 mm.

The terminal screws are suitable for fixing equal connections.

Weight: 2,0 kg.

Pipe cutters are used for cutting polymer pipes. Do not leave any burrs.

Main advantages:

• Simplicity of work;
• Fast cutting of pipes;
• Durability;
• Trouble-free operation.

Size: DN 110-160.

You can see the appearance of the pipe cutter in the photo.

Application:

• For pipes made of cross-linked polyethylene

Spare blade is used with mechanical cutter Rehau.

Application:

• For pipes made of cross-linked polyethylene

The kit with epoxy resin is designed for sealing concrete. The kit includes:

• Two-component epoxy resin with drinking water;
• Brush length 40 cm;
• Latex gloves (1 pair);
• Instructions.

Work area: 3.5 m2.

Weight: 1,40 kg.

Set of cleaning napkins Tangit is used to remove fats, dust, and other contaminants from Rehau fittings and pipes wich are made of cross-linked polyethylene. It is used before the start of welding with the FUSAPEX electro-welded couplings.

Quantity: 100 pieces / pack.

Weight: 0.350 kg.

Rehau expander head is used for installation of Stabil pipes wich are mounted with using compression sleeves. For pipes in size 16,2х2,6. It is designed for RO expander.

You can see the appearance of the expander heads in the photo.

Weight: 0,150 kg.

Rehau expander head is used for facilitation of installation Stabil pipes. The expander head is designed for RO expander, for pipes with diameter of 20 mm.

You can see the appearance of the expander head in the photo.

Weight: 0,150 kg.