Logo
Ru| En

Sealing systems

Home→ Catalog→ Sealing systems

Sealing systems from the Unitek company are used for the safe and hermetic entry of various communications into the building (gas pipelines, pipelines for hot and cold water supply, electrical networks).

The main advantages of using:

  • no special tools required for installation;
  • maximum tightness;
  • resistance to various aggressive environments;
  • high level of fire resistance;
  • explosion protection;
  • resistance to seismic activity;
  • due to the detachable design, the sealing modules can be installed on already laid communications;
  • the quality of installation is easy to check during installation, as there are no hidden works;
  • no additional maintenance required;
  • wide size range;
  • reusable is possible.

All products are certified and fully comply with safety requirements. Our company supplies only original products, and our managers will help you choose the most suitable sealing system for you.

Photo Name Article Price
Photo Draft
Photo Sleeve Unix-9200 with medium welded flange, length 100 mm, DN 80х1,5 (price on request) [Code number: SFSS9200-80/100] Draft Sleeve Unix-9200 with medium welded flange, length 100 mm, DN 80х1,5 (price on request) [Code number: SFSS9200-80/100]
Sleeve Unix-9200 with medium welded flange, length 100 mm, DN 80х1,5 (price on request) [Code number: SFSS9200-80/100]
Details 		SFSS9200-80/100

Application purposes:

  • For sealing the cable and pipeline entries through walls and foundations of waterproof concrete without waterproofing diaphragm or without the use of thick bituminous coatings
  • For pressure and non-pressure water
  • For high loads

Material:

  • AISI 304 stainless steel

Characteristics:

  • Gas tightness
  • Simplicity and reliability of installation
  • Water resistant
  • Corrosion resistance
  • Long service life
  • Sleeve length from 200 to 500 mm

      • The final price may vary depending on the volume and composition of the order. Request an invoice.

    Sleeve size Length Inner diameter Pipe / Cable Diameter Inner sleeve diameter Flange Diameter Flange Thickness Unix-RS single seal
    mm mm mm mm mm mm mm mm
    83х1,5 100 80 40 80 280 2,0 RS 80

    Download product installation instruction: Sleeve Unix-9200 Sleeve Unix-9200
Photo Draft
Photo Sleeve Unix-9200 with medium welded flange, length 200 mm, DN 80х1,5 (price on request) [Code number: SFSS9200-80/200] Draft Sleeve Unix-9200 with medium welded flange, length 200 mm, DN 80х1,5 (price on request) [Code number: SFSS9200-80/200]
Sleeve Unix-9200 with medium welded flange, length 200 mm, DN 80х1,5 (price on request) [Code number: SFSS9200-80/200]
Details 		SFSS9200-80/200

Application purposes:

  • For sealing the cable and pipeline entries through walls and foundations of waterproof concrete without waterproofing diaphragm or without the use of thick bituminous coatings
  • For pressure and non-pressure water
  • For high loads

Material:

  • AISI 304 stainless steel

Characteristics:

  • Gas tightness
  • Simplicity and reliability of installation
  • Water resistant
  • Corrosion resistance
  • Long service life
  • Sleeve length from 200 to 500 mm

      • The final price may vary depending on the volume and composition of the order. Request an invoice.

    Sleeve size Length Inner diameter Pipe / Cable Diameter Inner sleeve diameter Flange Diameter Flange Thickness Unix-RS single seal
    mm mm mm mm mm mm mm mm
    83х1,5 200 80 40 80 280 2,0 RS 80

    Download product installation instruction: Sleeve Unix-9200 Sleeve Unix-9200
Photo Draft
Photo Sleeve Unix-9200 with medium welded flange, length 300 mm, DN 80х1,5 (price on request) [Code number: SFSS9200-80/300] Draft Sleeve Unix-9200 with medium welded flange, length 300 mm, DN 80х1,5 (price on request) [Code number: SFSS9200-80/300]
Sleeve Unix-9200 with medium welded flange, length 300 mm, DN 80х1,5 (price on request) [Code number: SFSS9200-80/300]
Details 		SFSS9200-80/300

Application purposes:

  • For sealing the cable and pipeline entries through walls and foundations of waterproof concrete without waterproofing diaphragm or without the use of thick bituminous coatings
  • For pressure and non-pressure water
  • For high loads

Material:

  • AISI 304 stainless steel

Characteristics:

  • Gas tightness
  • Simplicity and reliability of installation
  • Water resistant
  • Corrosion resistance
  • Long service life
  • Sleeve length from 200 to 500 mm

      • The final price may vary depending on the volume and composition of the order. Request an invoice.

    Sleeve size Length Inner diameter Pipe / Cable Diameter Inner sleeve diameter Flange Diameter Flange Thickness Unix-RS single seal
    mm mm mm mm mm mm mm mm
    83х1,5 300 80 40 80 280 2,0 RS 80

    Download product installation instruction: Sleeve Unix-9200 Sleeve Unix-9200
Photo Draft
Photo Sleeve Unix-9200 with medium welded flange, length 400 mm, DN 80х1,5 (price on request) [Code number: SFSS9200-80/400] Draft Sleeve Unix-9200 with medium welded flange, length 400 mm, DN 80х1,5 (price on request) [Code number: SFSS9200-80/400]
Sleeve Unix-9200 with medium welded flange, length 400 mm, DN 80х1,5 (price on request) [Code number: SFSS9200-80/400]
Details 		SFSS9200-80/400

Application purposes:

  • For sealing the cable and pipeline entries through walls and foundations of waterproof concrete without waterproofing diaphragm or without the use of thick bituminous coatings
  • For pressure and non-pressure water
  • For high loads

Material:

  • AISI 304 stainless steel

Characteristics:

  • Gas tightness
  • Simplicity and reliability of installation
  • Water resistant
  • Corrosion resistance
  • Long service life
  • Sleeve length from 200 to 500 mm

      • The final price may vary depending on the volume and composition of the order. Request an invoice.

    Sleeve size Length Inner diameter Pipe / Cable Diameter Inner sleeve diameter Flange Diameter Flange Thickness Unix-RS single seal
    mm mm mm mm mm mm mm mm
    83х1,5 400 80 40 80 280 2,0 RS 80

    Download product installation instruction: Sleeve Unix-9200 Sleeve Unix-9200
Photo Draft
Photo Sleeve Unix-9200 with medium welded flange, length 500 mm, DN 80х1,5 (price on request) [Code number: SFSS9200-80/500] Draft Sleeve Unix-9200 with medium welded flange, length 500 mm, DN 80х1,5 (price on request) [Code number: SFSS9200-80/500]
Sleeve Unix-9200 with medium welded flange, length 500 mm, DN 80х1,5 (price on request) [Code number: SFSS9200-80/500]
Details 		SFSS9200-80/500

Application purposes:

  • For sealing the cable and pipeline entries through walls and foundations of waterproof concrete without waterproofing diaphragm or without the use of thick bituminous coatings
  • For pressure and non-pressure water
  • For high loads

Material:

  • AISI 304 stainless steel

Characteristics:

  • Gas tightness
  • Simplicity and reliability of installation
  • Water resistant
  • Corrosion resistance
  • Long service life
  • Sleeve length from 200 to 500 mm

      • The final price may vary depending on the volume and composition of the order. Request an invoice.

    Sleeve size Length Inner diameter Pipe / Cable Diameter Inner sleeve diameter Flange Diameter Flange Thickness Unix-RS single seal
    mm mm mm mm mm mm mm mm
    83х1,5 500 80 40 80 280 2,0 RS 80

    Download product installation instruction: Sleeve Unix-9200 Sleeve Unix-9200
Photo Draft
Photo [NO LONGER PRODUCED] - Sleeve Unix-2200 with average waterproofing collar against pressure and unconfined water, DN 70 (price on request) [Code number: SFSS2200070] Draft [NO LONGER PRODUCED] - Sleeve Unix-2200 with average waterproofing collar against pressure and unconfined water, DN 70 (price on request) [Code number: SFSS2200070]
[NO LONGER PRODUCED] - Sleeve Unix-2200 with average waterproofing collar against pressure and unconfined water, DN 70 (price on request) [Code number: SFSS2200070]
Details 		SFSS2200070

Application purposes:

  • For sealing the cable and pipeline entry through walls, foundations and floors of low-rise buildings
  • Against pressure and non-pressure water
  • For high static loads

Material:

  • Polypropylene (PP) or Polyvinyl Chloride (PVC) sleeve
  • Collar from AISI 304 stainless steel
  • EPDM rubber seal

Characteristics:

  • Water resistant
  • Gas tightness
  • High strength and durability
  • Corrosion resistance

The final price may vary depending on the volume and composition of the order. Request an invoice.

Pipe / Cable Diameter Outer diameter Inner diameter Wall thickness (e) Collar diameter Sleeve length Unix-RS single seal Weight
mm mm mm mm mm mm mm kg
30 75 71 1,8 270 500 RS 70 1,66
Photo Draft
Photo [NO LONGER PRODUCED] - Sleeve Unix-2200 with average waterproofing collar against pressure and unconfined water, DN 100 (price on request) [Code number: SFSS2200100] Draft [NO LONGER PRODUCED] - Sleeve Unix-2200 with average waterproofing collar against pressure and unconfined water, DN 100 (price on request) [Code number: SFSS2200100]
[NO LONGER PRODUCED] - Sleeve Unix-2200 with average waterproofing collar against pressure and unconfined water, DN 100 (price on request) [Code number: SFSS2200100]
Details 		SFSS2200100

Application purposes:

  • For sealing the cable and pipeline entry through walls, foundations and floors of low-rise buildings
  • Against pressure and non-pressure water
  • For high static loads

Material:

  • Polypropylene (PP) or Polyvinyl Chloride (PVC) sleeve
  • Collar from AISI 304 stainless steel
  • EPDM rubber seal

Characteristics:

  • Water resistant
  • Gas tightness
  • High strength and durability
  • Corrosion resistance

The final price may vary depending on the volume and composition of the order. Request an invoice.

Pipe / Cable Diameter Outer diameter Inner diameter Wall thickness (e) Collar diameter Sleeve length Unix-RS single seal Weight
mm mm mm mm mm mm mm kg
60 110 103 3,2 310 500 RS 100 2,54
Photo Draft
Photo [NO LONGER PRODUCED] - Sleeve Unix-2200 with average waterproofing collar against pressure and unconfined water, DN 150 (price on request) [Code number: SFSS2200150] Draft [NO LONGER PRODUCED] - Sleeve Unix-2200 with average waterproofing collar against pressure and unconfined water, DN 150 (price on request) [Code number: SFSS2200150]
[NO LONGER PRODUCED] - Sleeve Unix-2200 with average waterproofing collar against pressure and unconfined water, DN 150 (price on request) [Code number: SFSS2200150]
Details 		SFSS2200150

Application purposes:

  • For sealing the cable and pipeline entry through walls, foundations and floors of low-rise buildings
  • Against pressure and non-pressure water
  • For high static loads

Material:

  • Polypropylene (PP) or Polyvinyl Chloride (PVC) sleeve
  • Collar from AISI 304 stainless steel
  • EPDM rubber seal

Characteristics:

  • Water resistant
  • Gas tightness
  • High strength and durability
  • Corrosion resistance

The final price may vary depending on the volume and composition of the order. Request an invoice.

Pipe / Cable Diameter Outer diameter Inner diameter Wall thickness (e) Collar diameter Sleeve length Unix-RS single seal Weight
mm mm mm mm mm mm mm kg
110 160 152 4,0 360 500 RS 150 4,97
Photo
Photo [NO LONGER PRODUCED] - Unix-3200.1 Sleeve, panel thickness 100 mm, length 130 мм, temperature range from -30°С to +80°С, DN 70 (price on request) [Code number: SFSS3200.1-70/100]
[NO LONGER PRODUCED] - Unix-3200.1 Sleeve, panel thickness 100 mm, length 130 мм, temperature range from -30°С to +80°С, DN 70 (price on request) [Code number: SFSS3200.1-70/100]
Details 		SFSS3200.1-70/100

Application purposes:

  • For sealing the cable and pipeline entries through the sandwich panels
  • For non-pressure water

Material:

  • Stainless steel AISI 304, 316, 321
  • Rubber seal TMCS

Characteristics:

  • Sheet steel plate (lining), which is attached to the sandwich panel with self-tapping screws
  • Tightness
  • Simplicity and reliability of installation
  • High strength and durability
  • Corrosion resistance
  • The length of sleeve can vary from 50 to 330 mm
  • Temperature range: -30 °C to + 80 °C
Sandwich panel thickness Sleeve length Pipe / Cable Diameter Outer diameter Inner diameter Wall thickness (e) Diameter of support flange Diameter of installation hole in the panel Unix-RS single seal
mm mm mm mm mm mm mm mm mm
100 130 30 70 67 1,5 132 112 RS 70

Download product installation instruction: Sleeve Unix-3200 Sleeve Unix-3200
Photo
Photo [NO LONGER PRODUCED] - Unix-3200.1 Sleeve, panel thickness 100 mm, length 130 мм, temperature range from -60°С to +250°С, DN 70 (price on request) [Code number: SFSS3200.1-70/100 (S)]
[NO LONGER PRODUCED] - Unix-3200.1 Sleeve, panel thickness 100 mm, length 130 мм, temperature range from -60°С to +250°С, DN 70 (price on request) [Code number: SFSS3200.1-70/100 (S)]
Details 		SFSS3200.1-70/100 (S)

Application purposes:

  • For sealing the cable and pipeline entries through the sandwich panels
  • For non-pressure water

Material:

  • Stainless steel AISI 304, 316, 321
  • Silicone seal

Characteristics:

  • Sheet steel plate (lining), which is attached to the sandwich panel with self-tapping screws
  • Tightness
  • Simplicity and reliability of installation
  • High strength and durability
  • Corrosion resistance
  • The length of sleeve can vary from 50 to 330 mm
  • Temperature range: -60 °C to + 250°C
Sandwich panel thickness Sleeve length Pipe / Cable Diameter Outer diameter Inner diameter Wall thickness (e) Diameter of support flange Diameter of installation hole in the panel Unix-RS single seal
mm mm mm mm mm mm mm mm mm
100 130 30 70 67 1,5 132 112 RS 70

Download product installation instruction: Sleeve Unix-3200 Sleeve Unix-3200
Photo
Photo [NO LONGER PRODUCED] - Unix-3200.1 Sleeve, panel thickness 100 mm, length 130 мм, temperature range from -45°С to +150°С, DN 70 (price on request) [Code number: SFSS3200.1-70/100 (T)]
[NO LONGER PRODUCED] - Unix-3200.1 Sleeve, panel thickness 100 mm, length 130 мм, temperature range from -45°С to +150°С, DN 70 (price on request) [Code number: SFSS3200.1-70/100 (T)]
Details 		SFSS3200.1-70/100 (T)

Application purposes:

  • For sealing the cable and pipeline entries through the sandwich panels
  • For non-pressure water

Material:

  • Stainless steel AISI 304, 316, 321
  • The seal of the heat-resistant rubber

Characteristics:

  • Sheet steel plate (lining), which is attached to the sandwich panel with self-tapping screws
  • Tightness
  • Simplicity and reliability of installation
  • High strength and durability
  • Corrosion resistance
  • The length of sleeve can vary from 50 to 330 mm
  • Temperature range: -45 °C to + 150°C
Sandwich panel thickness Sleeve length Pipe / Cable Diameter Outer diameter Inner diameter Wall thickness (e) Diameter of support flange Diameter of installation hole in the panel Unix-RS single seal
mm mm mm mm mm mm mm mm mm
100 130 30 70 67 1,5 132 112 RS 70

Download product installation instruction: Sleeve Unix-3200 Sleeve Unix-3200
Photo
Photo [NO LONGER PRODUCED] - Unix-3200.1 Sleeve, panel thickness 120 mm, length 150 мм, temperature range from -30°С to +80°С, DN 70 (price on request) [Code number: SFSS3200.1-70/120]
[NO LONGER PRODUCED] - Unix-3200.1 Sleeve, panel thickness 120 mm, length 150 мм, temperature range from -30°С to +80°С, DN 70 (price on request) [Code number: SFSS3200.1-70/120]
Details 		SFSS3200.1-70/120

Application purposes:

  • For sealing the cable and pipeline entries through the sandwich panels
  • For non-pressure water

Material:

  • Stainless steel AISI 304, 316, 321
  • Rubber seal TMCS

Characteristics:

  • Sheet steel plate (lining), which is attached to the sandwich panel with self-tapping screws
  • Tightness
  • Simplicity and reliability of installation
  • High strength and durability
  • Corrosion resistance
  • The length of sleeve can vary from 50 to 330 mm
  • Temperature range: -30 °C to + 80 °C
Sandwich panel thickness Sleeve length Pipe / Cable Diameter Outer diameter Inner diameter Wall thickness (e) Diameter of support flange Diameter of installation hole in the panel Unix-RS single seal
mm mm mm mm mm mm mm mm mm
120 150 30 70 67 1,5 132 112 RS 70

Download product installation instruction: Sleeve Unix-3200 Sleeve Unix-3200
Photo
Photo [NO LONGER PRODUCED] - Unix-3200.1 Sleeve, panel thickness 120 mm, length 150 мм, temperature range from -60°С to +250°С, DN 70 (price on request) [Code number: SFSS3200.1-70/120 (S)]
[NO LONGER PRODUCED] - Unix-3200.1 Sleeve, panel thickness 120 mm, length 150 мм, temperature range from -60°С to +250°С, DN 70 (price on request) [Code number: SFSS3200.1-70/120 (S)]
Details 		SFSS3200.1-70/120 (S)

Application purposes:

  • For sealing the cable and pipeline entries through the sandwich panels
  • For non-pressure water

Material:

  • Stainless steel AISI 304, 316, 321
  • Silicone seal

Characteristics:

  • Sheet steel plate (lining), which is attached to the sandwich panel with self-tapping screws
  • Tightness
  • Simplicity and reliability of installation
  • High strength and durability
  • Corrosion resistance
  • The length of sleeve can vary from 50 to 330 mm
  • Temperature range: -60 °C to + 250°C
Sandwich panel thickness Sleeve length Pipe / Cable Diameter Outer diameter Inner diameter Wall thickness (e) Diameter of support flange Diameter of installation hole in the panel Unix-RS single seal
mm mm mm mm mm mm mm mm mm
120 150 30 70 67 1,5 132 112 RS 70

Download product installation instruction: Sleeve Unix-3200 Sleeve Unix-3200
Photo
Photo [NO LONGER PRODUCED] - Unix-3200.1 Sleeve, panel thickness 120 mm, length 150 мм, temperature range from -45°С to +150°С, DN 70 (price on request) [Code number: SFSS3200.1-70/120 (T)]
[NO LONGER PRODUCED] - Unix-3200.1 Sleeve, panel thickness 120 mm, length 150 мм, temperature range from -45°С to +150°С, DN 70 (price on request) [Code number: SFSS3200.1-70/120 (T)]
Details 		SFSS3200.1-70/120 (T)

Application purposes:

  • For sealing the cable and pipeline entries through the sandwich panels
  • For non-pressure water

Material:

  • Stainless steel AISI 304, 316, 321
  • The seal of the heat-resistant rubber

Characteristics:

  • Sheet steel plate (lining), which is attached to the sandwich panel with self-tapping screws
  • Tightness
  • Simplicity and reliability of installation
  • High strength and durability
  • Corrosion resistance
  • The length of sleeve can vary from 50 to 330 mm
  • Temperature range: -45 °C to + 150°C
Sandwich panel thickness Sleeve length Pipe / Cable Diameter Outer diameter Inner diameter Wall thickness (e) Diameter of support flange Diameter of installation hole in the panel Unix-RS single seal
mm mm mm mm mm mm mm mm mm
120 150 30 70 67 1,5 132 112 RS 70

Download product installation instruction: Sleeve Unix-3200 Sleeve Unix-3200
Photo
Photo [NO LONGER PRODUCED] - Unix-3200.1 Sleeve, panel thickness 150 mm, length 180 мм, temperature range from -30°С to +80°С, DN 70 (price on request) [Code number: SFSS3200.1-70/150]
[NO LONGER PRODUCED] - Unix-3200.1 Sleeve, panel thickness 150 mm, length 180 мм, temperature range from -30°С to +80°С, DN 70 (price on request) [Code number: SFSS3200.1-70/150]
Details 		SFSS3200.1-70/150

Application purposes:

  • For sealing the cable and pipeline entries through the sandwich panels
  • For non-pressure water

Material:

  • Stainless steel AISI 304, 316, 321
  • Rubber seal TMCS

Characteristics:

  • Sheet steel plate (lining), which is attached to the sandwich panel with self-tapping screws
  • Tightness
  • Simplicity and reliability of installation
  • High strength and durability
  • Corrosion resistance
  • The length of sleeve can vary from 50 to 330 mm
  • Temperature range: -30 °C to + 80 °C
Sandwich panel thickness Sleeve length Pipe / Cable Diameter Outer diameter Inner diameter Wall thickness (e) Diameter of support flange Diameter of installation hole in the panel Unix-RS single seal
mm mm mm mm mm mm mm mm mm
150 180 30 70 67 1,5 132 112 RS 70

Download product installation instruction: Sleeve Unix-3200 Sleeve Unix-3200
Photo
Photo [NO LONGER PRODUCED] - Unix-3200.1 Sleeve, panel thickness 150 mm, length 180 мм, temperature range from -60°С to +250°С, DN 70 (price on request) [Code number: SFSS3200.1-70/150 (S)]
[NO LONGER PRODUCED] - Unix-3200.1 Sleeve, panel thickness 150 mm, length 180 мм, temperature range from -60°С to +250°С, DN 70 (price on request) [Code number: SFSS3200.1-70/150 (S)]
Details 		SFSS3200.1-70/150 (S)

Application purposes:

  • For sealing the cable and pipeline entries through the sandwich panels
  • For non-pressure water

Material:

  • Stainless steel AISI 304, 316, 321
  • Silicone seal

Characteristics:

  • Sheet steel plate (lining), which is attached to the sandwich panel with self-tapping screws
  • Tightness
  • Simplicity and reliability of installation
  • High strength and durability
  • Corrosion resistance
  • The length of sleeve can vary from 50 to 330 mm
  • Temperature range: -60 °C to + 250°C
Sandwich panel thickness Sleeve length Pipe / Cable Diameter Outer diameter Inner diameter Wall thickness (e) Diameter of support flange Diameter of installation hole in the panel Unix-RS single seal
mm mm mm mm mm mm mm mm mm
150 180 30 70 67 1,5 132 112 RS 70

Download product installation instruction: Sleeve Unix-3200 Sleeve Unix-3200
Photo
Photo [NO LONGER PRODUCED] - Unix-3200.1 Sleeve, panel thickness 150 mm, length 180 мм, temperature range from -45°С to +150°С, DN 70 (price on request) [Code number: SFSS3200.1-70/150 (T)]
[NO LONGER PRODUCED] - Unix-3200.1 Sleeve, panel thickness 150 mm, length 180 мм, temperature range from -45°С to +150°С, DN 70 (price on request) [Code number: SFSS3200.1-70/150 (T)]
Details 		SFSS3200.1-70/150 (T)

Application purposes:

  • For sealing the cable and pipeline entries through the sandwich panels
  • For non-pressure water

Material:

  • Stainless steel AISI 304, 316, 321
  • The seal of the heat-resistant rubber

Characteristics:

  • Sheet steel plate (lining), which is attached to the sandwich panel with self-tapping screws
  • Tightness
  • Simplicity and reliability of installation
  • High strength and durability
  • Corrosion resistance
  • The length of sleeve can vary from 50 to 330 mm
  • Temperature range: -45 °C to + 150°C
Sandwich panel thickness Sleeve length Pipe / Cable Diameter Outer diameter Inner diameter Wall thickness (e) Diameter of support flange Diameter of installation hole in the panel Unix-RS single seal
mm mm mm mm mm mm mm mm mm
150 180 30 70 67 1,5 132 112 RS 70

Download product installation instruction: Sleeve Unix-3200 Sleeve Unix-3200
Photo
Photo [NO LONGER PRODUCED] - Unix-3200.1 Sleeve, panel thickness 200 mm, length 230 мм, temperature range from -30°С to +80°С, DN 70 (price on request) [Code number: SFSS3200.1-70/200]
[NO LONGER PRODUCED] - Unix-3200.1 Sleeve, panel thickness 200 mm, length 230 мм, temperature range from -30°С to +80°С, DN 70 (price on request) [Code number: SFSS3200.1-70/200]
Details 		SFSS3200.1-70/200

Application purposes:

  • For sealing the cable and pipeline entries through the sandwich panels
  • For non-pressure water

Material:

  • Stainless steel AISI 304, 316, 321
  • Rubber seal TMCS

Characteristics:

  • Sheet steel plate (lining), which is attached to the sandwich panel with self-tapping screws
  • Tightness
  • Simplicity and reliability of installation
  • High strength and durability
  • Corrosion resistance
  • The length of sleeve can vary from 50 to 330 mm
  • Temperature range: -30 °C to + 80 °C
Sandwich panel thickness Sleeve length Pipe / Cable Diameter Outer diameter Inner diameter Wall thickness (e) Diameter of support flange Diameter of installation hole in the panel Unix-RS single seal
mm mm mm mm mm mm mm mm mm
200 230 30 70 67 1,5 132 112 RS 70

Download product installation instruction: Sleeve Unix-3200 Sleeve Unix-3200
Photo
Photo [NO LONGER PRODUCED] - Unix-3200.1 Sleeve, panel thickness 200 mm, length 230 мм, temperature range from -60°С to +250°С, DN 70 (price on request) [Code number: SFSS3200.1-70/200 (S)]
[NO LONGER PRODUCED] - Unix-3200.1 Sleeve, panel thickness 200 mm, length 230 мм, temperature range from -60°С to +250°С, DN 70 (price on request) [Code number: SFSS3200.1-70/200 (S)]
Details 		SFSS3200.1-70/200 (S)

Application purposes:

  • For sealing the cable and pipeline entries through the sandwich panels
  • For non-pressure water

Material:

  • Stainless steel AISI 304, 316, 321
  • Silicone seal

Characteristics:

  • Sheet steel plate (lining), which is attached to the sandwich panel with self-tapping screws
  • Tightness
  • Simplicity and reliability of installation
  • High strength and durability
  • Corrosion resistance
  • The length of sleeve can vary from 50 to 330 mm
  • Temperature range: -60 °C to + 250°C
Sandwich panel thickness Sleeve length Pipe / Cable Diameter Outer diameter Inner diameter Wall thickness (e) Diameter of support flange Diameter of installation hole in the panel Unix-RS single seal
mm mm mm mm mm mm mm mm mm
200 230 30 70 67 1,5 132 112 RS 70

Download product installation instruction: Sleeve Unix-3200 Sleeve Unix-3200
Photo
Photo [NO LONGER PRODUCED] - Unix-3200.1 Sleeve, panel thickness 200 mm, length 230 мм, temperature range from -45°С to +150°С, DN 70 (price on request) [Code number: SFSS3200.1-70/200 (T)]
[NO LONGER PRODUCED] - Unix-3200.1 Sleeve, panel thickness 200 mm, length 230 мм, temperature range from -45°С to +150°С, DN 70 (price on request) [Code number: SFSS3200.1-70/200 (T)]
Details 		SFSS3200.1-70/200 (T)

Application purposes:

  • For sealing the cable and pipeline entries through the sandwich panels
  • For non-pressure water

Material:

  • Stainless steel AISI 304, 316, 321
  • The seal of the heat-resistant rubber

Characteristics:

  • Sheet steel plate (lining), which is attached to the sandwich panel with self-tapping screws
  • Tightness
  • Simplicity and reliability of installation
  • High strength and durability
  • Corrosion resistance
  • The length of sleeve can vary from 50 to 330 mm
  • Temperature range: -45 °C to + 150°C
Sandwich panel thickness Sleeve length Pipe / Cable Diameter Outer diameter Inner diameter Wall thickness (e) Diameter of support flange Diameter of installation hole in the panel Unix-RS single seal
mm mm mm mm mm mm mm mm mm
200 230 30 70 67 1,5 132 112 RS 70

Download product installation instruction: Sleeve Unix-3200 Sleeve Unix-3200

© Inrusstrade.ru 1999-2024. "Inrusstrade" Ltd. Copying and quoting is prohibited