Logo
Ru| En

Sealing systems

Home→ Catalog→ Sealing systems

Sealing systems from the Unitek company are used for the safe and hermetic entry of various communications into the building (gas pipelines, pipelines for hot and cold water supply, electrical networks).

The main advantages of using:

  • no special tools required for installation;
  • maximum tightness;
  • resistance to various aggressive environments;
  • high level of fire resistance;
  • explosion protection;
  • resistance to seismic activity;
  • due to the detachable design, the sealing modules can be installed on already laid communications;
  • the quality of installation is easy to check during installation, as there are no hidden works;
  • no additional maintenance required;
  • wide size range;
  • reusable is possible.

All products are certified and fully comply with safety requirements. Our company supplies only original products, and our managers will help you choose the most suitable sealing system for you.

Photo Name Article Price
Photo
Photo Unix-3200.1 Sleeve, panel thickness 50 mm, length 80 мм, temperature range from -30°С to +80°С, DN 80 (price on request) [Code number: SFSS3200.1-80/50]
Unix-3200.1 Sleeve, panel thickness 50 mm, length 80 мм, temperature range from -30°С to +80°С, DN 80 (price on request) [Code number: SFSS3200.1-80/50]
Details 		SFSS3200.1-80/50

Application purposes:

  • For sealing the cable and pipeline entries through the sandwich panels
  • For non-pressure water

Material:

  • Stainless steel AISI 304, 316, 321
  • Rubber seal TMCS

Characteristics:

  • Sheet steel plate (lining), which is attached to the sandwich panel with self-tapping screws
  • Tightness
  • Simplicity and reliability of installation
  • High strength and durability
  • Corrosion resistance
  • The length of sleeve can vary from 50 to 330 mm
  • Temperature range: -30 °C to + 80 °C
Sandwich panel thickness Sleeve length Pipe / Cable Diameter Outer diameter Inner diameter Wall thickness (e) Diameter of support flange Diameter of installation hole in the panel Unix-RS single seal
mm mm mm mm mm mm mm mm mm
50 80 40 83 80 1,5 155 128 RS 80

Download product installation instruction: Sleeve Unix-3200 Sleeve Unix-3200
Photo
Photo Unix-3200.1 Sleeve, panel thickness 50 mm, length 80 мм, temperature range from -60°С to +250°С, DN 80 (price on request) [Code number: SFSS3200.1-80/50 (S)]
Unix-3200.1 Sleeve, panel thickness 50 mm, length 80 мм, temperature range from -60°С to +250°С, DN 80 (price on request) [Code number: SFSS3200.1-80/50 (S)]
Details 		SFSS3200.1-80/50 (S)

Application purposes:

  • For sealing the cable and pipeline entries through the sandwich panels
  • For non-pressure water

Material:

  • Stainless steel AISI 304, 316, 321
  • Silicone seal

Characteristics:

  • Sheet steel plate (lining), which is attached to the sandwich panel with self-tapping screws
  • Tightness
  • Simplicity and reliability of installation
  • High strength and durability
  • Corrosion resistance
  • The length of sleeve can vary from 50 to 330 mm
  • Temperature range: -60 °C to + 250°C
Sandwich panel thickness Sleeve length Pipe / Cable Diameter Outer diameter Inner diameter Wall thickness (e) Diameter of support flange Diameter of installation hole in the panel Unix-RS single seal
mm mm mm mm mm mm mm mm mm
50 80 40 83 80 1,5 155 128 RS 80

Download product installation instruction: Sleeve Unix-3200 Sleeve Unix-3200
Photo
Photo Unix-3200.1 Sleeve, panel thickness 50 mm, length 80 мм, temperature range from -45°С to +150°С, DN 80 (price on request) [Code number: SFSS3200.1-80/50 (T)]
Unix-3200.1 Sleeve, panel thickness 50 mm, length 80 мм, temperature range from -45°С to +150°С, DN 80 (price on request) [Code number: SFSS3200.1-80/50 (T)]
Details 		SFSS3200.1-80/50 (T)

Application purposes:

  • For sealing the cable and pipeline entries through the sandwich panels
  • For non-pressure water

Material:

  • Stainless steel AISI 304, 316, 321
  • The seal of the heat-resistant rubber

Characteristics:

  • Sheet steel plate (lining), which is attached to the sandwich panel with self-tapping screws
  • Tightness
  • Simplicity and reliability of installation
  • High strength and durability
  • Corrosion resistance
  • The length of sleeve can vary from 50 to 330 mm
  • Temperature range: -45 °C to + 150°C
Sandwich panel thickness Sleeve length Pipe / Cable Diameter Outer diameter Inner diameter Wall thickness (e) Diameter of support flange Diameter of installation hole in the panel Unix-RS single seal
mm mm mm mm mm mm mm mm mm
50 80 40 83 80 1,5 155 128 RS 80

Download product installation instruction: Sleeve Unix-3200 Sleeve Unix-3200
Photo
Photo Unix-3200.1 Sleeve, panel thickness 60 mm, length 90 мм, temperature range from -30°С to +80°С, DN 80 (price on request) [Code number: SFSS3200.1-80/60]
Unix-3200.1 Sleeve, panel thickness 60 mm, length 90 мм, temperature range from -30°С to +80°С, DN 80 (price on request) [Code number: SFSS3200.1-80/60]
Details 		SFSS3200.1-80/60

Application purposes:

  • For sealing the cable and pipeline entries through the sandwich panels
  • For non-pressure water

Material:

  • Stainless steel AISI 304, 316, 321
  • Rubber seal TMCS

Characteristics:

  • Sheet steel plate (lining), which is attached to the sandwich panel with self-tapping screws
  • Tightness
  • Simplicity and reliability of installation
  • High strength and durability
  • Corrosion resistance
  • The length of sleeve can vary from 50 to 330 mm
  • Temperature range: -30 °C to + 80 °C
Sandwich panel thickness Sleeve length Pipe / Cable Diameter Outer diameter Inner diameter Wall thickness (e) Diameter of support flange Diameter of installation hole in the panel Unix-RS single seal
mm mm mm mm mm mm mm mm mm
60 90 40 83 80 1,5 155 128 RS 80

Download product installation instruction: Sleeve Unix-3200 Sleeve Unix-3200
Photo
Photo Unix-3200.1 Sleeve, panel thickness 60 mm, length 90 мм, temperature range from -60°С to +250°С, DN 80 (price on request) [Code number: SFSS3200.1-80/60 (S)]
Unix-3200.1 Sleeve, panel thickness 60 mm, length 90 мм, temperature range from -60°С to +250°С, DN 80 (price on request) [Code number: SFSS3200.1-80/60 (S)]
Details 		SFSS3200.1-80/60 (S)

Application purposes:

  • For sealing the cable and pipeline entries through the sandwich panels
  • For non-pressure water

Material:

  • Stainless steel AISI 304, 316, 321
  • Silicone seal

Characteristics:

  • Sheet steel plate (lining), which is attached to the sandwich panel with self-tapping screws
  • Tightness
  • Simplicity and reliability of installation
  • High strength and durability
  • Corrosion resistance
  • The length of sleeve can vary from 50 to 330 mm
  • Temperature range: -60 °C to + 250°C
Sandwich panel thickness Sleeve length Pipe / Cable Diameter Outer diameter Inner diameter Wall thickness (e) Diameter of support flange Diameter of installation hole in the panel Unix-RS single seal
mm mm mm mm mm mm mm mm mm
60 90 40 83 80 1,5 155 128 RS 80

Download product installation instruction: Sleeve Unix-3200 Sleeve Unix-3200
Photo
Photo Unix-3200.1 Sleeve, panel thickness 60 mm, length 90 мм, temperature range from -45°С to +150°С, DN 80 (price on request) [Code number: SFSS3200.1-80/60 (T)]
Unix-3200.1 Sleeve, panel thickness 60 mm, length 90 мм, temperature range from -45°С to +150°С, DN 80 (price on request) [Code number: SFSS3200.1-80/60 (T)]
Details 		SFSS3200.1-80/60 (T)

Application purposes:

  • For sealing the cable and pipeline entries through the sandwich panels
  • For non-pressure water

Material:

  • Stainless steel AISI 304, 316, 321
  • The seal of the heat-resistant rubber

Characteristics:

  • Sheet steel plate (lining), which is attached to the sandwich panel with self-tapping screws
  • Tightness
  • Simplicity and reliability of installation
  • High strength and durability
  • Corrosion resistance
  • The length of sleeve can vary from 50 to 330 mm
  • Temperature range: -45 °C to + 150°C
Sandwich panel thickness Sleeve length Pipe / Cable Diameter Outer diameter Inner diameter Wall thickness (e) Diameter of support flange Diameter of installation hole in the panel Unix-RS single seal
mm mm mm mm mm mm mm mm mm
60 90 40 83 80 1,5 155 128 RS 80

Download product installation instruction: Sleeve Unix-3200 Sleeve Unix-3200
Photo
Photo Unix-3200.1 Sleeve, panel thickness 80 mm, length 110 мм, temperature range from -30°С to +80°С, DN 80 (price on request) [Code number: SFSS3200.1-80/80]
Unix-3200.1 Sleeve, panel thickness 80 mm, length 110 мм, temperature range from -30°С to +80°С, DN 80 (price on request) [Code number: SFSS3200.1-80/80]
Details 		SFSS3200.1-80/80

Application purposes:

  • For sealing the cable and pipeline entries through the sandwich panels
  • For non-pressure water

Material:

  • Stainless steel AISI 304, 316, 321
  • Rubber seal TMCS

Characteristics:

  • Sheet steel plate (lining), which is attached to the sandwich panel with self-tapping screws
  • Tightness
  • Simplicity and reliability of installation
  • High strength and durability
  • Corrosion resistance
  • The length of sleeve can vary from 50 to 330 mm
  • Temperature range: -30 °C to + 80 °C
Sandwich panel thickness Sleeve length Pipe / Cable Diameter Outer diameter Inner diameter Wall thickness (e) Diameter of support flange Diameter of installation hole in the panel Unix-RS single seal
mm mm mm mm mm mm mm mm mm
80 110 40 83 80 1,5 155 128 RS 80

Download product installation instruction: Sleeve Unix-3200 Sleeve Unix-3200
Photo
Photo Unix-3200.1 Sleeve, panel thickness 80 mm, length 110 мм, temperature range from -60°С to +250°С, DN 80 (price on request) [Code number: SFSS3200.1-80/80 (S)]
Unix-3200.1 Sleeve, panel thickness 80 mm, length 110 мм, temperature range from -60°С to +250°С, DN 80 (price on request) [Code number: SFSS3200.1-80/80 (S)]
Details 		SFSS3200.1-80/80 (S)

Application purposes:

  • For sealing the cable and pipeline entries through the sandwich panels
  • For non-pressure water

Material:

  • Stainless steel AISI 304, 316, 321
  • Silicone seal

Characteristics:

  • Sheet steel plate (lining), which is attached to the sandwich panel with self-tapping screws
  • Tightness
  • Simplicity and reliability of installation
  • High strength and durability
  • Corrosion resistance
  • The length of sleeve can vary from 50 to 330 mm
  • Temperature range: -60 °C to + 250°C
Sandwich panel thickness Sleeve length Pipe / Cable Diameter Outer diameter Inner diameter Wall thickness (e) Diameter of support flange Diameter of installation hole in the panel Unix-RS single seal
mm mm mm mm mm mm mm mm mm
80 110 40 83 80 1,5 155 128 RS 80

Download product installation instruction: Sleeve Unix-3200 Sleeve Unix-3200
Photo
Photo Unix-3200.1 Sleeve, panel thickness 80 mm, length 110 мм, temperature range from -45°С to +150°С, DN 80 (price on request) [Code number: SFSS3200.1-80/80 (T)]
Unix-3200.1 Sleeve, panel thickness 80 mm, length 110 мм, temperature range from -45°С to +150°С, DN 80 (price on request) [Code number: SFSS3200.1-80/80 (T)]
Details 		SFSS3200.1-80/80 (T)

Application purposes:

  • For sealing the cable and pipeline entries through the sandwich panels
  • For non-pressure water

Material:

  • Stainless steel AISI 304, 316, 321
  • The seal of the heat-resistant rubber

Characteristics:

  • Sheet steel plate (lining), which is attached to the sandwich panel with self-tapping screws
  • Tightness
  • Simplicity and reliability of installation
  • High strength and durability
  • Corrosion resistance
  • The length of sleeve can vary from 50 to 330 mm
  • Temperature range: -45 °C to + 150°C
Sandwich panel thickness Sleeve length Pipe / Cable Diameter Outer diameter Inner diameter Wall thickness (e) Diameter of support flange Diameter of installation hole in the panel Unix-RS single seal
mm mm mm mm mm mm mm mm mm
80 110 40 83 80 1,5 155 128 RS 80

Download product installation instruction: Sleeve Unix-3200 Sleeve Unix-3200
Photo
Photo Unix-3200.3 Sleeve, panel thickness 100 mm, length 130 мм, temperature range from -30°С to +80°С, DN 100 (price on request) [Code number: SFSS3200.3-100/100]
Unix-3200.3 Sleeve, panel thickness 100 mm, length 130 мм, temperature range from -30°С to +80°С, DN 100 (price on request) [Code number: SFSS3200.3-100/100]
Details 		SFSS3200.3-100/100

Application purposes:

  • For sealing the cable and pipeline entries through the sandwich panels
  • For non-pressure water

Material:

  • Stainless steel AISI 304, 316, 321
  • Rubber seal TMCS

Characteristics:

  • With free sealing gasket, consisting of two steel rings, large and small diameters, between which a rubber gland is placed, tightening threaded pairs
  • Tightness
  • Simplicity and reliability of installation
  • High strength and durability
  • Corrosion resistance
  • The length of sleeve can vary from 50 to 330 mm
  • Temperature range: -30 °C to + 80 °C
Sandwich panel thickness Sleeve length Pipe / Cable Diameter Outer diameter Inner diameter Wall thickness Diameter of the support flange Mounting hole diameter Seal Unix RS
mm mm mm mm mm mm mm mm  
100 130 60 102 98,6 1,5 175 148 RS100

Download product installation instruction: Sleeve Unix-3200 Sleeve Unix-3200
Photo
Photo Unix-3200.3 Sleeve, panel thickness 100 mm, length 130 мм, temperature range from -60°С to +250°С, DN 100 (price on request) [Code number: SFSS3200.3-100/100 (S)]
Unix-3200.3 Sleeve, panel thickness 100 mm, length 130 мм, temperature range from -60°С to +250°С, DN 100 (price on request) [Code number: SFSS3200.3-100/100 (S)]
Details 		SFSS3200.3-100/100 (S)

Application purposes:

  • For sealing the cable and pipeline entries through the sandwich panels
  • For non-pressure water

Material:

  • Stainless steel AISI 304, 316, 321
  • Silicone seal

Characteristics:

  • With free sealing gasket, consisting of two steel rings, large and small diameters, between which a rubber gland is placed, tightening threaded pairs
  • Tightness
  • Simplicity and reliability of installation
  • High strength and durability
  • Corrosion resistance
  • The length of sleeve can vary from 50 to 330 mm
  • Temperature range: -60 °C to + 250°C
Sandwich panel thickness Sleeve length Pipe / Cable Diameter Outer diameter Inner diameter Wall thickness Diameter of the support flange Mounting hole diameter Seal Unix RS
mm mm mm mm mm mm mm mm  
100 130 60 102 98,6 1,5 175 148 RS100

Download product installation instruction: Sleeve Unix-3200 Sleeve Unix-3200
Photo
Photo Unix-3200.3 Sleeve, panel thickness 100 mm, length 130 мм, temperature range from -45°С to +150°С, DN 100 (price on request) [Code number: SFSS3200.3-100/100 (T)]
Unix-3200.3 Sleeve, panel thickness 100 mm, length 130 мм, temperature range from -45°С to +150°С, DN 100 (price on request) [Code number: SFSS3200.3-100/100 (T)]
Details 		SFSS3200.3-100/100 (T)

Application purposes:

  • For sealing the cable and pipeline entries through the sandwich panels
  • For non-pressure water

Material:

  • Stainless steel AISI 304, 316, 321
  • The seal of the heat-resistant rubber

Characteristics:

  • With free sealing gasket, consisting of two steel rings, large and small diameters, between which a rubber gland is placed, tightening threaded pairs
  • Tightness
  • Simplicity and reliability of installation
  • High strength and durability
  • Corrosion resistance
  • The length of sleeve can vary from 50 to 330 mm
  • Temperature range: -45 °C to + 150°C
Sandwich panel thickness Sleeve length Pipe / Cable Diameter Outer diameter Inner diameter Wall thickness Diameter of the support flange Mounting hole diameter Seal Unix RS
mm mm mm mm mm mm mm mm  
100 130 60 102 98,6 1,5 175 148 RS100

Download product installation instruction: Sleeve Unix-3200 Sleeve Unix-3200
Photo
Photo Unix-3200.3 Sleeve, panel thickness 120 mm, length 150 мм, temperature range from -30°С to +80°С, DN 100 (price on request) [Code number: SFSS3200.3-100/120]
Unix-3200.3 Sleeve, panel thickness 120 mm, length 150 мм, temperature range from -30°С to +80°С, DN 100 (price on request) [Code number: SFSS3200.3-100/120]
Details 		SFSS3200.3-100/120

Application purposes:

  • For sealing the cable and pipeline entries through the sandwich panels
  • For non-pressure water

Material:

  • Stainless steel AISI 304, 316, 321
  • Rubber seal TMCS

Characteristics:

  • With free sealing gasket, consisting of two steel rings, large and small diameters, between which a rubber gland is placed, tightening threaded pairs
  • Tightness
  • Simplicity and reliability of installation
  • High strength and durability
  • Corrosion resistance
  • The length of sleeve can vary from 50 to 330 mm
  • Temperature range: -30 °C to + 80 °C
Sandwich panel thickness Sleeve length Pipe / Cable Diameter Outer diameter Inner diameter Wall thickness Diameter of the support flange Mounting hole diameter Seal Unix RS
mm mm mm mm mm mm mm mm  
120 150 60 102 98,6 1,5 175 148 RS100

Download product installation instruction: Sleeve Unix-3200 Sleeve Unix-3200
Photo
Photo Unix-3200.3 Sleeve, panel thickness 120 mm, length 150 мм, temperature range from -60°С to +250°С, DN 100 (price on request) [Code number: SFSS3200.3-100/120 (S)]
Unix-3200.3 Sleeve, panel thickness 120 mm, length 150 мм, temperature range from -60°С to +250°С, DN 100 (price on request) [Code number: SFSS3200.3-100/120 (S)]
Details 		SFSS3200.3-100/120 (S)

Application purposes:

  • For sealing the cable and pipeline entries through the sandwich panels
  • For non-pressure water

Material:

  • Stainless steel AISI 304, 316, 321
  • Silicone seal

Characteristics:

  • With free sealing gasket, consisting of two steel rings, large and small diameters, between which a rubber gland is placed, tightening threaded pairs
  • Tightness
  • Simplicity and reliability of installation
  • High strength and durability
  • Corrosion resistance
  • The length of sleeve can vary from 50 to 330 mm
  • Temperature range: -60 °C to + 250°C
Sandwich panel thickness Sleeve length Pipe / Cable Diameter Outer diameter Inner diameter Wall thickness Diameter of the support flange Mounting hole diameter Seal Unix RS
mm mm mm mm mm mm mm mm  
120 150 60 102 98,6 1,5 175 148 RS100

Download product installation instruction: Sleeve Unix-3200 Sleeve Unix-3200
Photo
Photo Unix-3200.3 Sleeve, panel thickness 120 mm, length 150 мм, temperature range from -45°С to +150°С, DN 100 (price on request) [Code number: SFSS3200.3-100/120 (T)]
Unix-3200.3 Sleeve, panel thickness 120 mm, length 150 мм, temperature range from -45°С to +150°С, DN 100 (price on request) [Code number: SFSS3200.3-100/120 (T)]
Details 		SFSS3200.3-100/120 (T)

Application purposes:

  • For sealing the cable and pipeline entries through the sandwich panels
  • For non-pressure water

Material:

  • Stainless steel AISI 304, 316, 321
  • The seal of the heat-resistant rubber

Characteristics:

  • With free sealing gasket, consisting of two steel rings, large and small diameters, between which a rubber gland is placed, tightening threaded pairs
  • Tightness
  • Simplicity and reliability of installation
  • High strength and durability
  • Corrosion resistance
  • The length of sleeve can vary from 50 to 330 mm
  • Temperature range: -45 °C to + 150°C
Sandwich panel thickness Sleeve length Pipe / Cable Diameter Outer diameter Inner diameter Wall thickness Diameter of the support flange Mounting hole diameter Seal Unix RS
mm mm mm mm mm mm mm mm  
120 150 60 102 98,6 1,5 175 148 RS100

Download product installation instruction: Sleeve Unix-3200 Sleeve Unix-3200
Photo
Photo Unix-3200.3 Sleeve, panel thickness 150 mm, length 180 мм, temperature range from -30°С to +80°С, DN 100 (price on request) [Code number: SFSS3200.3-100/150]
Unix-3200.3 Sleeve, panel thickness 150 mm, length 180 мм, temperature range from -30°С to +80°С, DN 100 (price on request) [Code number: SFSS3200.3-100/150]
Details 		SFSS3200.3-100/150

Application purposes:

  • For sealing the cable and pipeline entries through the sandwich panels
  • For non-pressure water

Material:

  • Stainless steel AISI 304, 316, 321
  • Rubber seal TMCS

Characteristics:

  • With free sealing gasket, consisting of two steel rings, large and small diameters, between which a rubber gland is placed, tightening threaded pairs
  • Tightness
  • Simplicity and reliability of installation
  • High strength and durability
  • Corrosion resistance
  • The length of sleeve can vary from 50 to 330 mm
  • Temperature range: -30 °C to + 80 °C
Sandwich panel thickness Sleeve length Pipe / Cable Diameter Outer diameter Inner diameter Wall thickness Diameter of the support flange Mounting hole diameter Seal Unix RS
mm mm mm mm mm mm mm mm  
150 180 60 102 98,6 1,5 175 148 RS100

Download product installation instruction: Sleeve Unix-3200 Sleeve Unix-3200
Photo
Photo Unix-3200.3 Sleeve, panel thickness 150 mm, length 180 мм, temperature range from -60°С to +250°С, DN 100 (price on request) [Code number: SFSS3200.3-100/150 (S)]
Unix-3200.3 Sleeve, panel thickness 150 mm, length 180 мм, temperature range from -60°С to +250°С, DN 100 (price on request) [Code number: SFSS3200.3-100/150 (S)]
Details 		SFSS3200.3-100/150 (S)

Application purposes:

  • For sealing the cable and pipeline entries through the sandwich panels
  • For non-pressure water

Material:

  • Stainless steel AISI 304, 316, 321
  • Silicone seal

Characteristics:

  • With free sealing gasket, consisting of two steel rings, large and small diameters, between which a rubber gland is placed, tightening threaded pairs
  • Tightness
  • Simplicity and reliability of installation
  • High strength and durability
  • Corrosion resistance
  • The length of sleeve can vary from 50 to 330 mm
  • Temperature range: -60 °C to + 250°C
Sandwich panel thickness Sleeve length Pipe / Cable Diameter Outer diameter Inner diameter Wall thickness Diameter of the support flange Mounting hole diameter Seal Unix RS
mm mm mm mm mm mm mm mm  
150 180 60 102 98,6 1,5 175 148 RS100

Download product installation instruction: Sleeve Unix-3200 Sleeve Unix-3200
Photo
Photo Unix-3200.3 Sleeve, panel thickness 150 mm, length 180 мм, temperature range from -45°С to +150°С, DN 100 (price on request) [Code number: SFSS3200.3-100/150 (T)]
Unix-3200.3 Sleeve, panel thickness 150 mm, length 180 мм, temperature range from -45°С to +150°С, DN 100 (price on request) [Code number: SFSS3200.3-100/150 (T)]
Details 		SFSS3200.3-100/150 (T)

Application purposes:

  • For sealing the cable and pipeline entries through the sandwich panels
  • For non-pressure water

Material:

  • Stainless steel AISI 304, 316, 321
  • The seal of the heat-resistant rubber

Characteristics:

  • With free sealing gasket, consisting of two steel rings, large and small diameters, between which a rubber gland is placed, tightening threaded pairs
  • Tightness
  • Simplicity and reliability of installation
  • High strength and durability
  • Corrosion resistance
  • The length of sleeve can vary from 50 to 330 mm
  • Temperature range: -45 °C to + 150°C
Sandwich panel thickness Sleeve length Pipe / Cable Diameter Outer diameter Inner diameter Wall thickness Diameter of the support flange Mounting hole diameter Seal Unix RS
mm mm mm mm mm mm mm mm  
150 180 60 102 98,6 1,5 175 148 RS100

Download product installation instruction: Sleeve Unix-3200 Sleeve Unix-3200
Photo
Photo Unix-3200.3 Sleeve, panel thickness 200 mm, length 230 мм, temperature range from -30°С to +80°С, DN 100 (price on request) [Code number: SFSS3200.3-100/200]
Unix-3200.3 Sleeve, panel thickness 200 mm, length 230 мм, temperature range from -30°С to +80°С, DN 100 (price on request) [Code number: SFSS3200.3-100/200]
Details 		SFSS3200.3-100/200

Application purposes:

  • For sealing the cable and pipeline entries through the sandwich panels
  • For non-pressure water

Material:

  • Stainless steel AISI 304, 316, 321
  • Rubber seal TMCS

Characteristics:

  • With free sealing gasket, consisting of two steel rings, large and small diameters, between which a rubber gland is placed, tightening threaded pairs
  • Tightness
  • Simplicity and reliability of installation
  • High strength and durability
  • Corrosion resistance
  • The length of sleeve can vary from 50 to 330 mm
  • Temperature range: -30 °C to + 80 °C
Sandwich panel thickness Sleeve length Pipe / Cable Diameter Outer diameter Inner diameter Wall thickness Diameter of the support flange Mounting hole diameter Seal Unix RS
mm mm mm mm mm mm mm mm  
200 230 60 102 98,6 1,5 175 148 RS100

Download product installation instruction: Sleeve Unix-3200 Sleeve Unix-3200
Photo
Photo Unix-3200.3 Sleeve, panel thickness 200 mm, length 230 мм, temperature range from -60°С to +250°С, DN 100 (price on request) [Code number: SFSS3200.3-100/200 (S)]
Unix-3200.3 Sleeve, panel thickness 200 mm, length 230 мм, temperature range from -60°С to +250°С, DN 100 (price on request) [Code number: SFSS3200.3-100/200 (S)]
Details 		SFSS3200.3-100/200 (S)

Application purposes:

  • For sealing the cable and pipeline entries through the sandwich panels
  • For non-pressure water

Material:

  • Stainless steel AISI 304, 316, 321
  • Silicone seal

Characteristics:

  • With free sealing gasket, consisting of two steel rings, large and small diameters, between which a rubber gland is placed, tightening threaded pairs
  • Tightness
  • Simplicity and reliability of installation
  • High strength and durability
  • Corrosion resistance
  • The length of sleeve can vary from 50 to 330 mm
  • Temperature range: -60 °C to + 250°C
Sandwich panel thickness Sleeve length Pipe / Cable Diameter Outer diameter Inner diameter Wall thickness Diameter of the support flange Mounting hole diameter Seal Unix RS
mm mm mm mm mm mm mm mm  
200 230 60 102 98,6 1,5 175 148 RS100

Download product installation instruction: Sleeve Unix-3200 Sleeve Unix-3200

© Inrusstrade.ru 1999-2024. "Inrusstrade" Ltd. Copying and quoting is prohibited