Pressing of pipes

Set of compression jaws for installation tool RAUTOOL H1 / H2, E2, A3, A-light2 is used for compression of fittings in Rehau piping systems. Compression connection is reliable and sealed. The compression jaws is resistant to deformation and corrosion. They can be used for installation pipes with diameter of 16/20 mm.

The compression jaws consist of long clamping jaw and short clamping jaw.

Rehau expander head is designed for expander tool RO. The expander head is used when installation of PE-X pipes in size 16х2,2 mm.

You can see the appearance of the expander head in the photo.

Weight: 0,120 kg.

Expander head is designed for expander tool RO, it can be used with PE-X pipe DN20.

You can see the appearance of the expander head in the photo.

Weight: 0.170 kg.

Expander head for expander tool RO is used with pipes DN25.

You can see the appearance of the expander head in the photo.

Weight: 0.130 kg.

Expander head for expander tool RO is used when installation of PE-X pipes. For pipes with diameter of 32 mm.

You can see the appearance of the expander head in the photo.

Weight: 0,200 kg.

Rehau expander heads facilitate and expedite the installation of polyethylene pipes. The expander heads are designed for RO expander, they are suitable for pipes in size 17х2,0.

You can see the appearance of the expander heads in the photo.

Weight: 0.160 kg.

Rehau expander head RO is used when installation of Rehau pipe systems. It is suitable for expander tool RO, RAUTOOL Xpand and for universal expander bit. It is used with pipes DN20.

You can see the appearance of the expander head in the photo.

Weight: 0.170 kg.

Rehau expander head is designed for RO expander. For pipes in size 25х2,3.

You can see the appearance of the expander head in the photo.

Weight: 0,180 kg.

Rehau expander heads are used when the installation PE-X pipes. The expander head is designed for RAUTOOL G2, E/G1, H/G1, H/G1 (F), it is suitable dor pipes with diameter of 40 mm.

You can see the appearance of the expander head in the photo.

Weight: 0,490 kg.

Expander head is used with RAUTOOL G2, E/G1, H/G1, H/G1 (F). For pipes in size 50х6,9.

You can see the appearance of the expander head in the photo.

Weight: 0,550 kg.

Expander head is used for expansion of PE-X pipes in size 63х8,6 mm. It can be used with installation tools RAUTOOL G2, E/G1, H/G1, H/G1 (F).

You can see the appearance of the expander head in the photo.

Weight: 0,670 kg.

Cleanser Tangit is used to remove fats, dust, and other contaminants from Rehau fittings and pipes wich are made of cross-linked polyethylene. It is used before the start of welding with the FUSAPEX electro-welded couplings.

Volume: 1 liter.

Weight: 0.900 kg.

Set of compression jaws is suitable for installation tool RAUTOOL M1. It is designed for polypropylene pipes with diameter of 40 mm. The compression jaws are required for compression of fittings.

The compression jaws consist of long clamping jaw and short clamping jaw. The double clamping jaws on one side should be inserted for one diameter of pipes.

The compression jaws are replaced when the tool is in the starting position - the tool levers should be maximum deflected.

Black compression jaws are used for installation of REHAU pipelines. For installation tools RAUTOOL H1 / H2, E2, A3 and A-light2. The set of compression jaws is used for maling tight connection of pipes and fittings with diameter of 40 mm.

The compression jaws consist of long clamping jaw and short clamping jaw.

Set of compression jaws is used when the installation of REHAU piping systems. It is used with installation tool RAUTOOL G2, E / G1, H / G1, H / G1 (F). The compression jaws is used for compression pipes DN40. The compression jaws are made of a material which is resistant to deformation and corrosion. They painted in black.

The compression jaws consist of long clamping jaw and short clamping jaw.

Hydraulic-mechanical tool RAUTOOL H2 is suited for the installation of REHAU piping systems REHAU, it can be used in areas without electricity.

The advantages of using the installation tool RAUTOOL H2:

• Due to the double compression jaw, two dimensions can be processed without alteration;
• Easy to install even in tight spots due to the compact design and the ergonomic joint to the compression cylinder;
• Big lift cylinder increases the speed of operation;
• Foot pump is equipped with two-way mechanism drain valve, so that RAUTOOL H2 more convenient to use;
• The tool can be used for the installation of pipes with diameter of 16-40 mm;
• Tool RAUTOOL H2 is robust and durable;
• Maintenance-free;
• Easy to operate.

The kit includes:

• Tool RAUTOOL H2:
• Hydraulic hose 3.5 m;
• 2 mounting pins;
• REHAU 40 stabil pipe cutter;
• Expanding pliers RO;
• Cleaning brush;
• Lubricant;
• Transport case;
• Operating instructions.

If necessary, the kit RAUTOOL H2 can be supplemented with the following expansion sets and accessories:

• RAUTITAN stabil 16 - 32 expansion set, RAUTITAN flex 16 - 32 expansion set and RAUTITAN flex 40 expansion set;
• Single and double compression jaws;
• Internal spiral spring for RAUTITAN stabil pipe;
• Expander bits for expanding pipes;
• Pipe shears for cutting pipes.

Battery-hydraulic tool RAUTOOL A3 is used for installation of REHAU pipes which are connected by compression sleeves. It can be used with pipes and fittings DN12-40. There is a built-in flashlight.

Technical data

Maximum operating pressure: 450 bar.

Maximum shearing force: 18 kN (linear).

Battery type: lithium-ion.

Battery capacity: 18 V / 3.0 Ah.

Compressions with one battery charge: over 200.

Battery charge time: approx. 22 minutes.

Mains voltage for charging: 230 V / 50 Hz.

Ambient temperature: from -10°С to +45°С.

Weight: 4 kg (tool and battery).

The kit includes:

• Tool RAUTOOL A3;
• 2 dowels;
• Charging station 230V;
• Lithium-ion battery, 18 V / 3 Ah;
• REHAU 40 stabil pipe cutter;
• Expanding Pliers RO;
• Lubricant;
• Cleaning brush;
• Transport case;
• Operating instructions.

The RAUTOOL A3 kit can be supplemented with the following expansion sets and accessories:

• Expander heads for manual expansion of pipes;
• Expander heads for hydraulic expansion of pipes;
• Spare battery;
• Network adapter which is used to connect the tool to the network;
• Internal spiral spring for RAUTITAN stabil pipe;
• Pipe shears for cutting of pipes.

Small, light battery-hydraulic-powered installation tool RAUTOOL A-light2 is used for installation of REHAU pipes which are connected with compression sleeves.

Maximum operating pressure: 450 bar.

Maximum shearing force: 18 kN (linear).

Battery type: lithium-ion.

Battery capacity: 18 V / 1.5 Ah.

Battery charge time: approx. 22 minutes.

Compressions with one battery charge: approx. 180.

Mains voltage for charging: 230 V / 50 Hz.

Ambient temperature: from -10°С to +45°С.

The kit includes:

• Tool RAUTOOL A-light2;
• Lithium-ion battery;
• Charging station;
• Pipe cutters 40 stabil;
• Expander tool QC;
• Lubricant;
• Cleaning brush;
• Transport case;
• Operating instructions.

The tool RAUTOOL A-light2 can be equipped with the following expansion sets and accessories:

• Expansion sets for manual/hydraulic expansion;
• Spare battery;
• Network adapter which is required to connect the tool to the network;
• Internal spiral spring for RAUTITAN stabil pipe;
• Pipe shears.

Electro-hydraulic tool RAUTOOL G2 kit is suitable for the installation of REHAU pipe systems with diameters of 50-63 mm.

The kit includes:

• Tool RAUTOOL G2;
• Set of compression jaws G1 50 and G1 63 (for SDR 7,4 and SDR 11);
• Pipe cutters 63;
• Cleaning brush;
• Burr remover;
• Transport case;
• Operating instructions.