Logo
Ru| En

Domestic sewerage

Home→ Catalog→ Sewerage→ Domestic sewerage

The internal sewerage system is one of the most important engineering systems of the building, and for its installation it is necessary to use high-quality pipes and fittings.

We supply products only from brands that have been proven over the years, producing pipes and fittings made of PVC, PP, cast iron and steel. All products meet all sanitary requirements, are made only from high-quality raw materials and are distinguished by reliability and durability.

This section presents not only pipes with fittings, but also additional equipment needed for sewerage installation:

  • plumbing siphons;
  • traps;
  • shower trays;
  • pipes for toilet bowls;
  • non-return valves;
  • air valves.
Photo Name Article Price
Photo
Photo Hutterer & Lechner Electronic control unit with interface for HL 710.2ЕPC [Code number: HL 0710E.0EPC]
Hutterer & Lechner Electronic control unit with interface for HL 710.2ЕPC [Code number: HL 0710E.0EPC]
Details 		HL 0710E.0EPC 260 673 rub

Application purposes:

  • For anti-flood valves

Weight: 1,357 kg
Photo Draft
Photo Hutterer & Lechner Concealed trap assembly, consisting of HL134.0, HL44, 2 water feeds solid brass and HL42, DN50 [Code number: HL 134/50] Draft Hutterer & Lechner Concealed trap assembly, consisting of HL134.0, HL44, 2 water feeds solid brass and HL42, DN50 [Code number: HL 134/50]
Hutterer & Lechner Concealed trap assembly, consisting of HL134.0, HL44, 2 water feeds solid brass and HL42, DN50 [Code number: HL 134/50]
Details 		HL 134/50 10 010 rub

HL 134/50 concealed trap assembly DN50 is embedded into the wall. Capacity of HL 134/50 is 0,38 l/s. Trap insert can be removed if necessary. There is a mounting plate HL 44 in which are fixed mounting angles 1/2"B. Also, the trap has test plugs HL 42.B and HL 42.R.

Diameter Material Capacity Weight
DN, mm   l/s gr
50 polypropylene 0,38 885
Photo Draft
Photo Hutterer & Lechner Rosette elastic, DN32 [Code number: HL 8EL/30] Draft Hutterer & Lechner Rosette elastic, DN32 [Code number: HL 8EL/30]
Hutterer & Lechner Rosette elastic, DN32 [Code number: HL 8EL/30]
Details 		HL 8EL/30 452 rub

Rosette elastic HL 8EL/30 is designed for using with HL traps. Diameter is 32 mm, height is 39 mm. It is made of PE.

Diameter Material Weight
DN, mm   gr
32 PE 8
Photo Draft
Photo [NO LONGER PRODUCED] - Hutterer & Lechner Elongation element for HL530F - flat shower block, 30cm (price on request) [Code number: HL 530VF-30] Draft [NO LONGER PRODUCED] - Hutterer & Lechner Elongation element for HL530F - flat shower block, 30cm (price on request) [Code number: HL 530VF-30]
[NO LONGER PRODUCED] - Hutterer & Lechner Elongation element for HL530F - flat shower block, 30cm (price on request) [Code number: HL 530VF-30]
Details 		HL 530VF-30

The HL Company produces special extension element for shower block HL 530F.0. Extension element HL 530VF-30 has a waterproof coating, and it can increase shower block to 300 mm. Extension element is made of EPS, and it weighs a little - just 1010 grams.

Size Material Weight
mm   gr
300 х 256 х 85 EPS  
 
Packaging data (carton)
Height Width Depth Weight Volume
mm mm mm kg m3
0 0 0 0 0
Photo Draft
Photo PAM-GLOBAL® S Offset bends 65, 130, 200 mm Draft PAM-GLOBAL® S Offset bends 65, 130, 200 mm
PAM-GLOBAL® S Offset bends 65, 130, 200 mm
Details
Nominal internal diameter L H W b c Weight Code number
DN mm mm mm mm mm kg  
50 133 185 58 75 35 1.1 156386
75 158 200 83 75 39 1.5 156478
75 233 230 83 150 45 2.3 156482
100 175 205 110 65 70 2 155812
100 185 215 110 75 41 2.5 156596
100 240 270 110 130 70 3.7 155821
100 260 250 110 150 47 3.3 156604
100 310 340 110 200 70 4.2 155822
125 210 236 135 75 46 3.7 156759
125 285 270 135 150 48 4.8 156764
150 235 255 160 75 51 5.1 156853
150 310 300 160 150 56 6.7 156858
200 285 295 210 75 61 8.3 156972
200 360 350 210 150 64 10.8 156976
Photo Draft
Photo PAM-GLOBAL® Plus Offset bend 130 mm Draft PAM-GLOBAL® Plus Offset bend 130 mm
PAM-GLOBAL® Plus Offset bend 130 mm
Details
Nominal internal diameter X L Weight Code number
DN mm mm kg  
100 70 270 3,7 155241
Photo Draft
Photo Corner branch PAM-GLOBAL® S 68˚ with elongated side Photo Corner branch PAM-GLOBAL® S 68˚ with elongated side Draft Corner branch PAM-GLOBAL® S 68˚ with elongated side
Corner branch PAM-GLOBAL® S 68˚ with elongated side
Details
Nominal internal diameter L H W b c d p q r Weight Code number
DN                   kg  
100x100x100 195 414 195 130 130 284 383 244 281 5,1 176943

Dimensions are presented in mm
Photo Draft
Photo (DISCONTINUED FROM PRODUCTION) - REHAU RAUPIANO PLUS bend 90° for connection to WC, d - 110 [Code number: 11216241001 / 121 624 001] Draft (DISCONTINUED FROM PRODUCTION) - REHAU RAUPIANO PLUS bend 90° for connection to WC, d - 110 [Code number: 11216241001 / 121 624 001]
(DISCONTINUED FROM PRODUCTION) - REHAU RAUPIANO PLUS bend 90° for connection to WC, d - 110 [Code number: 11216241001 / 121 624 001]
Details 		11216241001 968 rub

Rehau RAUPIANO PLUS bend is designed fot connection the domestic drainage system to WC. The connection is made at angle of 90°. Diameter is 110 mm. The bend is equipped with a sealing lip.

It is made of specially designed polypropylene which is reinforced with minerals, so that the material has improved sound-absorbing characteristics, also it is strong and durable.

Colour: RAL 9003 white.

Dy а b Weight
mm mm mm kg/pc
110/90° 230 160 0,391
Photo Draft
Photo (TEMPORARILY NOT SUPPLIED) - REHAU RAUTITAN support connection for bend or siphon [Code number: 11373451001 / 137 345 001] Draft (TEMPORARILY NOT SUPPLIED) - REHAU RAUTITAN support connection for bend or siphon [Code number: 11373451001 / 137 345 001]
(TEMPORARILY NOT SUPPLIED) - REHAU RAUTITAN support connection for bend or siphon [Code number: 11373451001 / 137 345 001]
Details 		11373451001 1 034 rub

Rehau RAUTITAN support connection for bend or siphon is used in case when you need to make a siphon or bend to the REHAU brackets. Comes with three nuts, washer and screw M8. It is made of galvanized steel.

a b Weight
mm mm kg/pc
40 40 0,099
Photo
Photo Hutterer & Lechner Waste valve core, 3-23mm [Code number: HL 0522.1E]
Hutterer & Lechner Waste valve core, 3-23mm [Code number: HL 0522.1E]
Details 		HL 0522.1E 1 551 rub
Photo
Photo Hutterer & Lechner Engine electric drive of the valve [Code number: HL 0710E.4EN]
Hutterer & Lechner Engine electric drive of the valve [Code number: HL 0710E.4EN]
Details 		HL 0710E.4EN 145 419 rub
Photo Draft
Photo Hutterer & Lechner Concealed trap assembly, consisting of HL134.0, HL44, DN40 [Code number: HL 134.2/40] Draft Hutterer & Lechner Concealed trap assembly, consisting of HL134.0, HL44, DN40 [Code number: HL 134.2/40]
Hutterer & Lechner Concealed trap assembly, consisting of HL134.0, HL44, DN40 [Code number: HL 134.2/40]
Details 		HL 134.2/40 4 636 rub

Application area:

  • For wash basins

Characteristics:

  • Material: PP
  • Dimension: DN40
  • Capacity: 0,38 l/sec

Weight: 0,56 kg

 
Packaging data (PE-bag)
Height Width Depth Weight Volume
mm mm mm kg m3
140 200 270 0,574 0,007560000
Photo Draft
Photo Hutterer & Lechner Stainless steel grate (V4A) 115x115mm 'Primus Design' [Code number: HL 3127] Draft Hutterer & Lechner Stainless steel grate (V4A) 115x115mm 'Primus Design' [Code number: HL 3127]
Hutterer & Lechner Stainless steel grate (V4A) 115x115mm 'Primus Design' [Code number: HL 3127]
Details 		HL 3127 21 576 rub

HL 3127 - it is special grate «Primus Design» for improving of extension «Klik-Klak». It is made of stainless steel, size of grate is 115*115*5 mm. It can withstand high load - up to 1.5 tonnes.

Size Material Weight
mm   gr
115*115*5 stainless steel 430
 
Packaging data (carton)
Height Width Depth Weight Volume
mm mm mm kg m3
13 27 0 0,45 0
Photo
Photo Hutterer & Lechner Recessed washing device trap with decorative connector, DN40/50 [Code number: HL 400.C]
Hutterer & Lechner Recessed washing device trap with decorative connector, DN40/50 [Code number: HL 400.C]
Details 		HL 400.C 4 463 rub
Photo Draft
Photo Hutterer & Lechner Rosette elastic, DN40 [Code number: HL 8EL/40] Draft Hutterer & Lechner Rosette elastic, DN40 [Code number: HL 8EL/40]
Hutterer & Lechner Rosette elastic, DN40 [Code number: HL 8EL/40]
Details 		HL 8EL/40 452 rub

Rosette elastic HL 8EL/40 is designed for using with HL traps. Diameter is 40 mm, height is 39 mm.

Diameter Material Weight
DN, mm   gr
40 PE 10
Photo Draft
Photo PAM-GLOBAL® Plus Object connection bend 90° for wash-basins, sinks and urinal units Draft PAM-GLOBAL® Plus Object connection bend 90° for wash-basins, sinks and urinal units
PAM-GLOBAL® Plus Object connection bend 90° for wash-basins, sinks and urinal units
Details
Nominal internal diameter X1 X2 K1 K2 Weight Code number
DN mm mm mm mm kg  
50 x 50 200 110 120 25 1,4 155205
50 x 60 200 110 120 30 1,6 155206
Photo Draft
Photo Long radius bend PAM-GLOBAL® S 88˚ Draft Long radius bend PAM-GLOBAL® S 88˚
Long radius bend PAM-GLOBAL® S 88˚
Details
Nominal internal diameter L H W a b Weight Code number
DN mm mm mm mm mm kg  
100 324 324 110 269 230 4,2 156606
150 349 349 160 274 210 8 156860
Photo Draft
Photo (NO LONGER PRODUCED) - REHAU RAUTITAN mounting rail, 2 m [Code number: 11370551001 / 137 055 001] Draft (NO LONGER PRODUCED) - REHAU RAUTITAN mounting rail, 2 m [Code number: 11370551001 / 137 055 001]
(NO LONGER PRODUCED) - REHAU RAUTITAN mounting rail, 2 m [Code number: 11370551001 / 137 055 001]
Details 		11370551001
Attention! The article is discontinued!

Two-meter REHAU mounting rail is used forcreating an individual bracket or mounting cantilever which are necessary when the installation of Rehau piping systems. The mounting rail is made of galvanized steel. Holes is universal.

Length: 2005 mm.

a b c Weight
mm mm mm kg/pc
2005 40 75 1,893
Photo Draft
Photo Wavin PVC Pressure Pipe systems Flange, PVC-U, d - 90 [Code number: 20140034] Draft Wavin PVC Pressure Pipe systems Flange, PVC-U, d - 90 [Code number: 20140034]
Wavin PVC Pressure Pipe systems Flange, PVC-U, d - 90 [Code number: 20140034]
Details 		20140034

ATTENTION! This product is temporarily unavailable for order!

d1 d2 d3 Z N x D DN
mm mm mm mm   mm
110 160 200 20 8x18 90
Photo
Photo Hutterer & Lechner Unction lot cover / assembling tool for HL520-series [Code number: HL 0520.0E]
Hutterer & Lechner Unction lot cover / assembling tool for HL520-series [Code number: HL 0520.0E]
Details 		HL 0520.0E 343 rub

Application area:

  • For shower trays

Characteristics:

  • Material: PP

Weight: 0,038 kg

It suitable for use with HL520F, HL520F.0, HL0523N.1E, HL523N-100x100, HL523N-120x120, HL523N-90x90, HL520FE, HL522V.0, HL522V.

 
Packaging data (PE-bag)
Height Width Depth Weight Volume
mm mm mm kg m3
50 100 100 0,042 0,000500000

© Inrusstrade.ru 1999-2024. "Inrusstrade" Ltd. Copying and quoting is prohibited