Domestic sewerage

Floor drain body is made of polymer with sound disconnected adjusting screws, with fitting for grates, with fiber glass textile and removable sifon, with ball joint outlet DN50, adjustable 0-15° horizontal.

The HL 530 mounting block with an integrated drain. This product is designed for wall-mounted installation and provides linear drainage from floor level. It is used in showers with a concrete structure. The drain, integrated into the mounting plate, can be used to drain wastewater with temperatures below 85°C. The height of the extension can be adjusted by trimming it during installation. The drain body, integrated into the mounting plate, can be rotated 180° if necessary. The dimensions of the block are 1200 x 256 x 115 mm. It is supplied without a grate or subframe.

Application purpose:

• For waste disposal

Characteristics:

• the height of the shower tray is 79 mm;
• built into the mounting element, which is made of extruded polystyrene EPS-40 (size 1200x200x79 mm);
• there is a subframe (size 499x80x13 mm), as well as a grate (size 480x50 mm) made of stainless steel;
• the surface of the mounting casing is covered with Montaplast waterproofing sheet;
• suitable for wall mounting;
• the length is adjusted to the desired trimming (no more than 600 mm);
• element HL531V is used to extend the tray;
• the slope to the wall is 3°;
• it is possible to use wall tiles (thickness with tile adhesive no more than 17 mm) or floor tiles (thickness with tile adhesive no more than 28 mm);
• the drain is equipped with a dry siphon "Primus" (water seal height 25 mm);
• warranty period: 1 year;
• service life: 50 years.

Dimensions and components

Technical characteristics

Shower channel HL 531.0 is integrated in an EPS-installation block. Waterproof, fleece-laminated surface with 3% incline. For direct tiling. You can fine-tune of shower channel. Channel is equipped with PRIMUS-trap - this device allows you forget about the unpleasant smell of sewage. Another important advantage of the shower channel is its capacity - 0.6 l/s. For near-wall installation. Including lot cover, but without stainless steel cover.

Shower channel HL 531.0/18 is integrated in an EPS-installation block. It is also equipped with stainless steel frame, but without cover. Waterproof, fleece-laminated surface with 3% incline. For direct tiling. You can fine-tune of shower channel. Channel is equipped with PRIMUS-trap - this device allows you forget about the unpleasant smell of sewage. Another important advantage of the shower channel is its capacity - 0.6 l/s. For near-wall installation. Including lot cover..

Shower channel HL 531.0/23 is integrated in an EPS-installation block. It is also equipped with stainless steel frame, but without cover. Waterproof, fleece-laminated surface with 3% incline. For direct tiling. You can fine-tune of shower channel. Channel is equipped with PRIMUS-trap - this device allows you forget about the unpleasant smell of sewage. Another important advantage of the shower channel is its capacity - 0.6 l/s. For near-wall installation. Including lot cover..

Shower channel HL 531.0/28 is integrated in an EPS-installation block. It is also equipped with stainless steel frame, but without cover. Waterproof, fleece-laminated surface with 3% incline. For direct tiling. You can fine-tune of shower channel. Channel is equipped with PRIMUS-trap - this device allows you forget about the unpleasant smell of sewage. Another important advantage of the shower channel is its capacity - 0.6 l/s. For near-wall installation. Including lot cover..

Shower channel HL 531/18 is integrated in an EPS-installation block. It is also equipped with stainless steel frame. Waterproof, fleece-laminated surface with 3% incline. For direct tiling. You can fine-tune of shower channel. Channel is equipped with PRIMUS-trap - this device allows you forget about the unpleasant smell of sewage. Another important advantage of the shower channel is its capacity - 0.6 l/s. For near-wall installation. Including lot cover..

Shower channel HL 531/23 is integrated in an EPS-installation block. It is also equipped with stainless steel frame. Waterproof, fleece-laminated surface with 3% incline. For direct tiling. You can fine-tune of shower channel. Channel is equipped with PRIMUS-trap - this device allows you forget about the unpleasant smell of sewage. Another important advantage of the shower channel is its capacity - 0.6 l/s. For near-wall installation. Including lot cover..

Shower channel HL 531/28 is integrated in an EPS-installation block. It is also equipped with stainless steel frame. Waterproof, fleece-laminated surface with 3% incline. For direct tiling. You can fine-tune of shower channel. Channel is equipped with PRIMUS-trap - this device allows you forget about the unpleasant smell of sewage. Another important advantage of the shower channel is its capacity - 0.6 l/s. For near-wall installation. Including lot cover..

Application area:

• For barriere-free showers

Characteristics:

• Material: EPS - 20
• Dimension: 1200 x 185 mm
• installation height: 20 mm

Weight: 0,196 kg

Shower element "Primus-board" of extruded polystyrene foam with built-in shower channel. Outlet: DN50 horizontal, possible in different directions. Capacity: 0.6 l/s.

Shower element "Primus-board" of extruded polystyrene foam with built-in shower channel. Outlet: DN50 horizontal, possible in different directions. Capacity: 0.6 l/s.

Shower element "Primus-board" of extruded polystyrene foam with built-in shower channel. Outlet: DN50 horizontal, possible in different directions. Capacity: 0.6 l/s.

Shower element "Primus-board" of extruded polystyrene foam with built-in shower channel. Outlet: DN50 horizontal, possible in different directions. Capacity: 0.6 l/s.

Shower element "Primus-board" of extruded polystyrene foam with built-in shower channel. Outlet: DN50 horizontal, possible in different directions. Capacity: 0.6 l/s.

Shower element "Primus-board" of extruded polystyrene foam with built-in shower channel. Outlet: DN50 horizontal, possible in different directions. Capacity: 0.6 l/s.

Shower element "Primus-board" of extruded polystyrene foam with built-in shower channel. Outlet: DN50 horizontal, possible in different directions. Capacity: 0.6 l/s.

Shower element "Primus-board" of extruded polystyrene foam with built-in shower channel. Outlet: DN50 horizontal, possible in different directions. Capacity: 0.6 l/s.

Shower element "Primus-board" of extruded polystyrene foam with built-in shower channel. Outlet: DN50 horizontal, possible in different directions. Capacity: 0.6 l/s.