Domestic sewerage of buildings

Watch products by Brands

The internal sewerage system is one of the most important engineering systems of the building, and for its installation it is necessary to use high-quality pipes and fittings.

We supply products only from brands that have been proven over the years, producing pipes and fittings made of PVC, PP, cast iron and steel. All products meet all sanitary requirements, are made only from high-quality raw materials and are distinguished by reliability and durability.

This section presents not only pipes with fittings, but also additional equipment needed for sewerage installation:

plumbing siphons;
traps;
shower trays;
pipes for toilet bowls;
non-return valves;
air valves.

Photo Name Article Price

Hutterer & Lechner Air admittance valve DN110 with integrated double insulation and reduction DN50/75 [Code number: HL 900N] (Russia)

Details

HL900N

5 443 rub

Application purpose:

For non-ventilated sewer risers
To reduce the likelihood of a hydraulic seal failure in sanitary appliances
To prevent sewer air from entering the premises

Characteristics:

the body is made of PP (double wall thermally insulated), and the membrane is made of rubber;
equipped with adapter for DN 50/75;
there is a special removable insect net;
mounted vertically, located in the upper part of the riser (the valve must be located above the connection point of the highest floor outlet - at least 300 mm);
installation in residential premises is possible;
corresponds to GOST 23289-94;
operation is possible at temperatures from -50°С to +100°С;
warranty period: 1 year;
service life: 50 years.

Equipment:

a special insect net;
heat-insulated wall;
rubber membrane.

Produced in Russia.

Operating principle

Mounting diagram

Technical characteristics

Diameter	Material	Capacity	Weight
DN, mm		l/s	gr
50 75 110	polypropylene	37	550

Documentation

Download data sheet: HL 900N Air admittance valve

Hutterer & Lechner Air admittance valve with integrated double insulation, DN110 [Code number: HL 900NECO] (Russia)

Details

HL900NECO

4 424 rub

Application purpose:

For non-ventilated sewer risers
To reduce the likelihood of a hydraulic seal failure in sanitary appliances
To prevent sewer air from entering the premises

Characteristics:

the body is made of PP (double wall thermally insulated), and the membrane is made of rubber;
there is a special insect net;
mounted vertically, located in the upper part of the riser (the valve must be located above the connection point of the highest floor outlet - at least 300 mm);
installation in residential premises is possible;
corresponds to GOST 23289-94;
operation is possible at temperatures from -50°С to +100°С;
warranty period: 1 year;
service life: 50 years.

Equipment:

a special insect net;
heat-insulated wall;
rubber membrane.

Produced in Russia.

Operating principle

Mounting diagram

Technical characteristics

Diameter	Material	Capacity	Weight
DN, mm		l/s	gr
110	polypropylene	37	470

Documentation

Download data sheet: HL 900NECO Air admittance valve

Hutterer & Lechner Ventpipe with integrated thermal insulation and massive lip-seal, DN75/90/110 [Code number: HL 901]

Details

HL 901

6 437 rub

Ventpipe HL 900NECO is designed for installation in unventilated sewer risers. The device does not allow polluted air penetrate into the room. This ventpipe is equipped with a removable insect screen, it is made of polypropylene. Diameter of the ventpipe is 75/90/110 mm. Also, it has a rubber membrane and integrated double insulation. Capacity is 32 l/s. It is installed vertically on top of riser.

Diameter	Material	Capacity	Weight
DN, mm		l/s	gr
75 90 110	polypropylene	32	362

Download data sheet: Ventpipe HL 901

Hutterer & Lechner Air admittance valve, 1' [Code number: HL 902]

Details

HL 902

2 226 rub

Air admittance valve HL 902 is designed for installation in unventilated sewer risers. It can help you prevent a possible disruption of water trap in sanitary devices, the device also does not allow polluted air penetrate into the room. It is made of polypropylene. Diameter of the air admittance valve is 1". It is designed for HL 404 model.

Diameter	Material	Weight
inch		gr
1"	polypropylene	30

Hutterer & Lechner Balcony and terrace drain with flange, frost-and drought-proof flap seal, horizontal, DN40/50 [Code number: HL 90.2] (Russia)

Details

HL 90.2

5 239 rub

Balcony and terrace drain HL 90.2 comes with lot cover. The drain is equipped with grate 115 x 115 mm and grate frame 123 x 123 mm. Also the drain has flange, horizontal outlet DN40/50 and frost-and drought-proof flap seal. Capacity is 0,50 l/s.

Diameter	Capacity	Load	Weight
DN, mm	l/s	kg	gr
40/50	0,50	300	425

Material of spare parts

Grate	Grate frame	Flap cartridge	Body

stainless steel	polypropylene	polypropylene	polyethylene

Packaging data (carton)

Height	Width	Depth	Weight	Volume
mm	mm	mm	kg	m3
155	225	295	0,612	0,010288125

Download data sheet: Balcony and terrace drain HL 90.2

Hutterer & Lechner Balcony and terrace drain as HL 90.2, but with extension KLICK-KLACK [Code number: HL 90.2-3000]

Details

HL 90.2-3000

8 401 rub

Balcony and terrace drain HL 90.2-3000 is used for derivation of meltwater and rainwater to drainage system. The drain has grate 115*115 mm - it is made of stainless steel. Size of grate frame is 121*121 mm. Capacity is 0,50 l/s. Weight of the drain is 425 gr. The drain can endure load up to 300 kg. Also the drain is equipped with a frost- and drought-proof flap seal.

Diameter	Capacity	Load	Weight
DN, mm	l/s	kg	gr
40/50	0,50	300	425

Material of spare parts

Grate	Flap cartridge	Grate frame	Body

stainless steel	polypropylene	stainless steel	polyethene

Packaging data (carton)

Height	Width	Depth	Weight	Volume
mm	mm	mm	kg	m3
155	225	295	0,9	0,010288125

Hutterer & Lechner Balcony and terrace drain, horizontal, with flange, frost-proof stench flap and extension, DN40/50 [Code number: HL 90.2-3020]

Details

HL90.2-3020

16 899 rub

Application purpose:

For draining rain and melt water into the sewer system from balconies and terraces

Characteristics:

release type: horizontal;
the ladder is equipped with a "plate" for picking up waterproofing;
there is an extension with a subframe (size 132x132 mm) made of stainless steel;
it is possible to glue ceramic tiles - for this there is an insert measuring 112x112 mm;
the temperature of the drains should not exceed +85°C (it is possible to increase up to +100°C for a short period of time - no more than 200 liters);
suitable for installation with socket pipes made of PVC and PP;
the slope to the wall must be at least 2°;
service life: 50 years.

Equipment:

Housing made of PE
Extension element made of polypropylene
Extension subframe made of V4A stainless steel
O-ring (rubber)
Mechanical odor lock (made of PP)
Insert for ceramic tiles (stainless steel V4A)

Technical characteristics

Diameter	Capacity	Load	Weight
DN, mm	l/s	kg	gr
40/50	0,5	300	580

Packaging data (carton)

Height	Width	Depth	Weight	Volume
mm	mm	mm	kg	m3
175	292	392	0,877	0,0200312

Documentation

Download example of use: Balcony and terrace drain HL 90.2-3020

Hutterer & Lechner Floor drain with cast iron grate and cast iron frame, with flap cartridge, horizontal, DN40/50 [Code number: HL 90.2G]

Details

HL 90.2G

10 986 rub

Floor drain HL 90.2G has grate 137*137 mm - it is made of cast iron. Size of grate frame is 150*150 mm. Capacity is 0,50 l/s. The drain can endure load up to 300 kg. Also the drain is equipped with a frost- and drought-proof flap seal.

Diameter	Capacity	Load
DN, mm	l/s	kg
40/50	0,50	1500

Material of spare parts

Grate	Flap cartridge	Grate frame	Body

cast iron	polypropylene	cast iron	polyethene

Packaging data (carton)

Height	Width	Depth	Weight	Volume
mm	mm	mm	kg	m3
155	225	295

Hutterer & Lechner Air admittance valve 1' with tee DN32x1 1/4' [Code number: HL 902T/30]

Details

HL 902T/30

3 769 rub

Hutterer & Lechner Air admittance valve 1' with tee DN32 [Code number: HL 902T/32]

Details

HL 902T/32

3 769 rub

Air admittance valve HL 902T/32 with DN32 is installed on non-ventilated sewer risers. The valve protects the room against polluted air. Also, the air admittance valve protects sanitary devices against disruption of water trap. It is equipped with T-connection with two locking nuts.

Diameter	Material	Weight
DN, mm		gr
32	polypropylene	75

Hutterer & Lechner Air admittance valve 1' with tee DN40 [Code number: HL 902T/40]

Details

HL 902T/40

3 769 rub

Air admittance valve HL 902T/40 with DN40 is installed on non-ventilated sewer risers. The device protects the room against polluted air. Also, the air admittance valve protects sanitary devices against disruption of water trap. It is equipped with T-connection with two locking nuts.

Diameter	Material	Weight
DN, mm		gr
40	polypropylene	80

Hutterer & Lechner Drain for balcony HL 90.2, with grate HL 037N.1E, horizontal [Code number: HL 90.2(X)]

Details

HL 90.2(X)

5 239 rub

Hutterer & Lechner Air admittance valve, DN50 [Code number: HL 903]

Details

HL 903

3 553 rub

Air admittance valve HL 903 is designed for installation in unventilated sewer risers. The valve protects sanitary devices against disruption of water trap and the room against polluted air. It can be installed on risers with diameters of 32, 40 and 50 mm. Capacity is 8 l/s. You can mount this air admittance valve on a long horizontal pipe, but pipe length must be greater 4 meters.

Diameter	Material	Capacity	Weight
DN, mm		l/s	gr
32 40 50	ABS/ polypropylene	8	139

Download data sheet: Air admittance valve HL 903

Hutterer & Lechner Balcony and terrace drain with KLICK-KLACK system, horizontal, DN40/50 [Code number: HL 90-3000]

Details

HL 90-3000

7 499 rub

Balcony- and terrace drain HL 90-3000 is equipped with a strainer. The drain has grate 115*115 mm - it is made of stainless steel. Size of grate frame is 121*121. Capacity is 0,56 l/s. The drain can endure load up to 300 kg.

Diameter	Capacity	Load	Weight
DN, mm	l/s	kg	gr
40/50	0,56	300	425

Material of spare parts

Grate	Strainer	Grate frame	Body

stainless steel	polypropylene	stainless steel	polyethene

Packaging data (carton)

Height	Width	Depth	Weight	Volume
mm	mm	mm	kg	m3
155	225	295	0,9	0,010288125

Hutterer & Lechner Balcony and terrace drain with extension with tilable frame 132x132mm, horizontal, DN40/50 [Code number: HL 90-3020]

Details

HL 90-3020

15 841 rub

Balcony and terrace drain HL 90-3020 comes with pre-installed lot cover. The drain is equipped with grate 112 x 112 mm and grate frame 132 x 132 mm. Also the drain has flange, horizontal outlet DN40/50 and extension. Capacity is 0,56 l/s.

Diameter	Capacity	Load	Weight
DN, mm	l/s	kg	gr
40/50	0,56	300	760

Material of spare parts

Mould for tiles	Grate frame	Strainer	Body

stainless steel polypropylene	stainless steel	polypropylene	polyethylene

Packaging data (carton)

Height	Width	Depth	Weight	Volume
mm	mm	mm	kg	m3
175	292	392	1,054	0,0200312

Download example of use: Balcony and terrace drain HL 90-3020

Hutterer & Lechner Air admittance valve with adapter DN32/50, DN40 [Code number: HL 904]

Details

HL 904

2 562 rub

Air admittance valve HL 904 is designed for installation in unventilated sewer risers with diameters of 32, 40 and 50 mm. The valve protects sanitary devices against disruption of water trap. Capacity is 5,5 l/s. You can mount this air admittance valve on a long horizontal pipe, but pipe length must be greater 4 meters.

Diameter	Material	Capacity	Weight
DN, mm		l/s	gr
32 40 50	polypropylene	5,5	90

Download data sheet: Air admittance valve HL 904

Hutterer & Lechner Air admittance valve with tee DN40x1 1/2', DN40 [Code number: HL 904T]

Details

HL 904T

3 769 rub

Air admittance valve HL 904T is designed for installation in unventilated sewer risers. The valve protects sanitary devices against disruption of water trap. Capacity is 5,5 l/s. You can mount this air admittance valve on a long horizontal pipe, but pipe length must be greater 4 meters. It is equipped with T-connection DN40 x 1 1/2'.

Diameter	Material	Capacity	Weight
DN, mm		l/s	gr
40	polypropylene	5,5	136

Hutterer & Lechner Air admittance valve for in-wall installation, including lot cover [Code number: HL 905]

Details

HL 905

10 359 rub

Air admittance valve HL 905 for in-wall installation is made of ABS. The valve protects sanitary devices against disruption of water trap. You can mount this air admittance valve on a long horizontal pipe, but pipe length must be greater 4 meters. Including lot cover, removable function cartridge and cover.

Diameter	Material	Capacity	Weight
DN, mm		l/s	gr
50 75	ABS		383

Download data sheet: Air admittance valve HL 905

Hutterer & Lechner Air admittance valve for in-wall installation, including lot cover, removable function cartridge [Code number: HL 905.0]

Details

HL 905.0

9 187 rub

Air admittance valve HL 905.0 for in-wall installation is made of ABS. The device protects sanitary devices against disruption of water trap. Including lot cover, removable function cartridge. Without cover!

Material	Diameter	Capacity	Weight
	DN, mm	l/s	gr
ABS	50/75	13	0,336

Packaging data (PE-bag)

Height	Width	Depth	Weight	Volume
mm	mm	mm	kg	m3
0	0	0	0,34	0

Hutterer & Lechner White cover for HL905 [Code number: HL 905.1]

Details

HL 905.1

1 528 rub

Especially for HL 905 model the HL Company produces white cover HL 905.1. Size cover is 125 x 125 mm, it is made of ABS.

Size	Material	Weight
mm		kg
125 x 125	ABS	0,047