Ru|
En
The internal sewerage system is one of the most important engineering systems of the building, and for its installation it is necessary to use high-quality pipes and fittings.
We supply products only from brands that have been proven over the years, producing pipes and fittings made of PVC, PP, cast iron and steel. All products meet all sanitary requirements, are made only from high-quality raw materials and are distinguished by reliability and durability.
This section presents not only pipes with fittings, but also additional equipment needed for sewerage installation:
| Photo | Name | Article | Price | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
![Photo Hutterer & Lechner Shower trap with ball-joint, waste fitting 1 1/2', hair stop HL526 and plug, horizontal, DN40/50x1 1/2' [Code number: HL 514]](/system/products/photos/000/004/689/original/hl_514-photo.jpg?1461296208)
|
Hutterer & Lechner Shower trap with ball-joint, waste fitting 1 1/2', hair stop HL526 and plug, horizontal, DN40/50x1 1/2' [Code number: HL 514]
Details
|
HL 514 | 3 201 rub | |||||||||||||||
|
HL 514 shower trap DN40/50 x 1 1/2' horizontal is designed for shower trays. It is equipped with ball-joint, waste fitting 1 1/2' and hair stop 1 1/2' HL526. Trap is made of polypropylene, weight of trap is 275 g and capacity is 0,58 l/s. Trap is equipped with water seal with 50 mm high.
|
||||||||||||||||||
![Photo Hutterer & Lechner shower trap with ball-joint, waste fitting 1 1/2', hair stop HL526 and plug, horizontal, DN40/50x80 mm [Code number: HL 514-80]](/system/products/photos/000/032/102/original/HL_514-80-photo.jpg?1532122760)
|
Hutterer & Lechner shower trap with ball-joint, waste fitting 1 1/2', hair stop HL526 and plug, horizontal, DN40/50x80 mm [Code number: HL 514-80]
Details
|
HL 514-80 | 3 517 rub | |||||||||||||||
|
HL 514-80 is a shower trap which is installed in shower trays and equipped with ball-joint. The shower trap is horizontal, drain hole d 80 mm for shower tray with drain hole d 60 mm. There is hair stop HL 526 and plug. The mounting height is 95 mm.
|
||||||||||||||||||
![Photo Hutterer & Lechner shower trap as HL 514 but without HL 526 [Code number: HL 514-K]](/system/products/photos/000/032/005/original/HL_514-K-photo.jpg?1532122792)
|
Hutterer & Lechner shower trap as HL 514 but without HL 526 [Code number: HL 514-K]
Details
|
HL 514-K | 2 800 rub | |||||||||||||||
|
HL 514-K is a shower trap which is installed in shower trays and equipped with ball-joint. The shower trap is horizontal.Without a hair stop. Mounting height 95 mm.
|
||||||||||||||||||
![Photo Hutterer & Lechner Shower trap with ball-joint and stainless steel-coverplate d 86mm, horizontal, DN40/50x1 1/2' [Code number: HL 514/SN]](/system/products/photos/000/011/027/original/hl_514_sn-photo.jpg?1461296290)
|
Hutterer & Lechner Shower trap with ball-joint and stainless steel-coverplate d 86mm, horizontal, DN40/50x1 1/2' [Code number: HL 514/SN]
Details
|
HL 514/SN | 3 201 rub | |||||||||||||||
|
HL 514/SN shower trap DN40/50x1 1/2' horizontal is designed for shower trays. It is equipped with ball-joint and stainless steel-coverplate d 86 mm. Color of the decorative coverplate can be different. It is mounted on 85 mm height, capacity is 0.48 l/s.
|
||||||||||||||||||
![Photo Hutterer & Lechner shower trap horizontal with ball-joint, DN40/50x1 1/2' [Code number: HL 514/SN.0]](/system/products/photos/000/032/143/original/HL_514_SN.0-photo.jpg?1532124447)
|
Hutterer & Lechner shower trap horizontal with ball-joint, DN40/50x1 1/2' [Code number: HL 514/SN.0]
Details
|
HL 514/SN.0 | 2 370 rub | |||||||||||||||
|
HL 514/SN.0 is a shower trap which is installed in shower trays and equipped with ball-joint. The shower trap is horizontal, drain hole 6/4". Comes with function lot cover / assembling tool.
|
||||||||||||||||||
![Photo Hutterer & Lechner Shower trap for waste holes d 60 mm, with ball-joint, horizontal, DN40/50 x 80 mm [Code number: HL 514/SN-80]](/system/products/photos/000/004/694/original/hl_514_sn-80-photo.jpg?1461296260)
|
Hutterer & Lechner Shower trap for waste holes d 60 mm, with ball-joint, horizontal, DN40/50 x 80 mm [Code number: HL 514/SN-80]
Details
|
HL 514/SN-80 | 3 201 rub | |||||||||||||||
|
HL 514/SN-80 shower trap DN40/50x80 horizontal is designed for shower trays and is equipped with ball-joint. The HL Company for manufacturing HL 514 / SN-80 uses polypropylene. Capacity of the trap is 0.55 l/s. Diameter of waste holes is 60 mm. Trap is equipped with a stainless steel-coverplate d 86 mm. Trap is self-cleaning, and coverplate can be colored or covered with metal.
|
||||||||||||||||||
![Photo Hutterer & Lechner Shower trap for waste holes 1 1/2', with ball-joint, hose connector 8 - 13 mm, horizontal, DN40/50 x 1 1/2' [Code number: HL 514/SNV]](/system/products/photos/000/004/696/original/hl_514_snv-photo.jpg?1461296354)
|
Hutterer & Lechner Shower trap for waste holes 1 1/2', with ball-joint, hose connector 8 - 13 mm, horizontal, DN40/50 x 1 1/2' [Code number: HL 514/SNV]
Details
|
HL 514/SNV | 4 537 rub | |||||||||||||||
|
HL 514/SNV shower trap DN40/50x1 1/2' horizontal is designed for shower trays and is equipped with ball-joint. The HL Company for manufacturing HL 514/SNV uses polypropylene. Capacity is 0.55 l/s. Diameter of waste holes is 1 1/2'. Trap is equipped with a stainless steel-coverplate d 86 mm and hose connector 8 - 13 mm. Trap is self-cleaning, and coverplate can be colored or covered with metal.
|
||||||||||||||||||
![Photo Hutterer & Lechner shower trap with ball-joint and hose connector 8-13mm, DN40/50 [Code number: HL 514/SNV.0]](/system/products/photos/000/031/977/original/HL_514_SNV.0-photo.jpg?1532130003)
|
Hutterer & Lechner shower trap with ball-joint and hose connector 8-13mm, DN40/50 [Code number: HL 514/SNV.0]
Details
|
HL 514/SNV.0 | 4 366 rub | |||||||||||||||
|
HL 514 / SNV.0 is a shower trap which is installed in shower trays and equipped with ball-joint. The shower trap is horizontal, drain hole 6/4", there is hose connector 8 - 13 mm (for a steam shower). Comes with function lot cover / assembling tool.
|
||||||||||||||||||
![Photo Hutterer & Lechner shower trap with ball-joint and hose connector 9-12 mm [Code number: HL 514/SNV-80]](/system/products/photos/000/031/978/original/HL_514_SNV-80-photo.jpg?1532129985)
|
Hutterer & Lechner shower trap with ball-joint and hose connector 9-12 mm [Code number: HL 514/SNV-80]
Details
|
HL 514/SNV-80 | 4 537 rub | |||||||||||||||
|
HL 514/SNV-80 is a shower trap which is installed in shower trays and equipped with ball-joint. The shower trap is horizontal, drain hole 6/4", there is hose connector 9-12 mm (for a steam shower).
|
||||||||||||||||||
![Photo Hutterer & Lechner stand pipe (Н=1500 mm) for HL80.2 (price on request) [Code number: HL 515-1500]](/system/products/photos/000/032/103/original/HL_515-1500-photo.jpg?1532122772)
|
Hutterer & Lechner stand pipe (Н=1500 mm) for HL80.2 (price on request) [Code number: HL 515-1500]
Details
|
HL 515-1500 | 38 453 rub | |||||||||||||||
|
|
||||||||||||||||||
![Photo Hutterer & Lechner Shower trap for waste holes d 90mm, with coverplate d 113mm, with ball-joint, DN50 [Code number: HL 520]](/system/products/photos/000/004/700/original/HL_520-photo.jpg?1461296319)
|
Hutterer & Lechner Shower trap for waste holes d 90mm, with coverplate d 113mm, with ball-joint, DN50 [Code number: HL 520]
Details
|
HL 520 | 9 027 rub | |||||||||||||||
|
HL 520 Shower trap DN50 is intended for installation in a shower tray and is equipped with a waste hole d 90mm and cleanable hair strainer. Also shower trap is equipped with a removable sifon. Stainless steel cover plate 112 mm can paint in different colors. Capacity is 0,90 l/s.
|
||||||||||||||||||
![Photo Hutterer & Lechner Shower trap for shower trays with waste holes d 90mm, without cover plate, DN50 [Code number: HL 520.0]](/system/products/photos/000/004/701/original/HL_520.0-photo.jpg?1461296207)
|
Hutterer & Lechner Shower trap for shower trays with waste holes d 90mm, without cover plate, DN50 [Code number: HL 520.0]
Details
|
HL 520.0 | 4 486 rub | |||||||||||||||
|
HL 520.0 Shower trap DN50 is intended for installation in a shower tray and is equipped with a waste hole d 90mm and cleanable hair strainer, but without cover plate. Also shower trap is equipped with a removable sifon and ball-joint. Capacity is 0,90 l/s.
|
||||||||||||||||||
![Photo Hutterer & Lechner Flat shower trap for waste holes d 90mm, with stainless steel coverplate d 113mm, with ball-joint, DN40/50 [Code number: HL 520F]](/system/products/photos/000/011/048/original/HL_520f-photo.jpg?1484793869)
|
Hutterer & Lechner Flat shower trap for waste holes d 90mm, with stainless steel coverplate d 113mm, with ball-joint, DN40/50 [Code number: HL 520F]
Details
|
HL 520F | 9 027 rub | |||||||||||||||
|
Flat shower trap HL 520F has a low mounting height. The diameter of the drain hole is 90 mm. There is a hair strainer, a removable trap seal cartridge and a stainless steel cover DN 112 mm.
|
||||||||||||||||||
![Photo Hutterer & Lechner Flat shower trap with ball-joint for waste holes d 90mm [Code number: HL 520F.0]](/system/products/photos/000/032/006/original/HL_520F.0-photo.jpg?1532122747)
|
Hutterer & Lechner Flat shower trap with ball-joint for waste holes d 90mm [Code number: HL 520F.0]
Details
|
HL 520F.0 | 4 722 rub | |||||||||||||||
|
HL 520F.0 is a shower trap which is installed in shower trays. The shower trap is horizontal, drain hole d 90 mm.
|
||||||||||||||||||
![Photo Hutterer & Lechner Siphon for shower tray flat, with ball-joint outlet for hole d 90mm, Q=0,42 l/s, DN 40 [Code number: HL 521]](/system/products/photos/000/031/876/original/HL_521-photo.jpg?1532122758)
|
Hutterer & Lechner Siphon for shower tray flat, with ball-joint outlet for hole d 90mm, Q=0,42 l/s, DN 40 [Code number: HL 521]
Details
|
HL 521 | 10 019 rub | |||||||||||||||
|
HL 521 is a shower trap which is installed in shower trays and equipped with ball-joint. The shower trap is flat, drain hole d 90 mm. Trap can be removed, there is stainless steel cover plate d 113 mm also. Mounting height is 60 mm.
|
||||||||||||||||||
![Photo Hutterer & Lechner Shower trap for waste holes d 90mm and with stainless steel-coverplate d 113mm, ball-joint, DN40/50 [Code number: HL 522]](/system/products/photos/000/004/702/original/hl_522-photo.jpg?1461296250)
|
Hutterer & Lechner Shower trap for waste holes d 90mm and with stainless steel-coverplate d 113mm, ball-joint, DN40/50 [Code number: HL 522]
Details
|
HL 522 | 9 501 rub | |||||||||||||||
|
HL 522 Shower trap DN40/50 is intended for installation in a shower tray and is equipped with a waste hole d 90mm and ball-joint for horizontal or vertical use. Also shower trap is equipped with a removable trap seal insert. Stainless steel coverplate 113 mm can paint in different colors. Capacity is 0,50 l/s. Mounting height is 83 mm.
|
||||||||||||||||||
![Photo Hutterer & Lechner Shower trap body for waste holes d 90mm, with ball-joint, DN40/50 [Code number: HL 522.0]](/system/products/photos/000/004/703/original/hl_522.0-photo.jpg?1461296352)
|
Hutterer & Lechner Shower trap body for waste holes d 90mm, with ball-joint, DN40/50 [Code number: HL 522.0]
Details
|
HL 522.0 | 4 722 rub | |||||||||||||||
|
HL 522.0 Shower trap body DN40/50 is intended for installation in a shower tray and is equipped with a waste hole d 90mm and ball-joint for horizontal or vertical use. Also shower trap is equipped with a removable trap seal insert. Capacity is 0,50 l/s. Mounting height is 83 mm.
|
||||||||||||||||||
![Photo Hutterer Lechner Outlet for shower gutter HL 50FV.0 [Code number HL 522856]](/system/products/photos/000/033/746/original/hl_522856-photo.jpg?1546114879)
|
Hutterer Lechner Outlet for shower gutter HL 50FV.0 [Code number HL 522856]
Details
|
HL 522856 | 14 124 rub | |||||||||||||||
|
|
||||||||||||||||||
![Photo Hutterer & Lechner Shower drain with grate frame 121 x 121 mm, for prefabricated shower floors, ball-joint, DN40/50 [Code number: HL 522KE]](/system/products/photos/000/004/708/original/HL_522KE-photo.jpg?1461296354)
|
Hutterer & Lechner Shower drain with grate frame 121 x 121 mm, for prefabricated shower floors, ball-joint, DN40/50 [Code number: HL 522KE]
Details
|
HL 522KE | 11 364 rub | |||||||||||||||
|
|
||||||||||||||||||
![Photo Hutterer & Lechner shower trap for prefabricated shower floors 13-33mm with ball-joint, ball-joint, DN 40/50 [Code number: HL 522KE.L]](/system/products/photos/000/031/999/original/HL_522KE.L-photo.jpg?1532122788)
|
Hutterer & Lechner shower trap for prefabricated shower floors 13-33mm with ball-joint, ball-joint, DN 40/50 [Code number: HL 522KE.L]
Details
|
HL 522KE.L | 11 364 rub | |||||||||||||||
|
HL 522KE.L is a shower trap for prefabricated shower floors which is equipped with ball-joint. There is a tile collar 145 x 145 mm - 9 mm high. Grate 115 x 115 mm is made of stainless steel. Comes with function lot cover / assembling tool. The mounting height is 83 mm.
|
||||||||||||||||||
![Draft Hutterer & Lechner Shower trap with ball-joint, waste fitting 1 1/2', hair stop HL526 and plug, horizontal, DN40/50x1 1/2' [Code number: HL 514]](/system/products/drafts/000/004/689/original/hl_514-draft.jpg?1461294097)
![Draft Hutterer & Lechner Shower trap with ball-joint and stainless steel-coverplate d 86mm, horizontal, DN40/50x1 1/2' [Code number: HL 514/SN]](/system/products/drafts/000/011/027/original/HL_514_SN-draft.jpg?1461294175)
![Draft Hutterer & Lechner Shower trap for waste holes d 60 mm, with ball-joint, horizontal, DN40/50 x 80 mm [Code number: HL 514/SN-80]](/system/products/drafts/000/004/694/original/hl_514_sn-80-draft.jpg?1461294144)
![Draft Hutterer & Lechner Shower trap for waste holes 1 1/2', with ball-joint, hose connector 8 - 13 mm, horizontal, DN40/50 x 1 1/2' [Code number: HL 514/SNV]](/system/products/drafts/000/004/696/original/hl_514_snv-draft.jpg?1461294234)
![Draft Hutterer & Lechner Shower trap for waste holes d 90mm, with coverplate d 113mm, with ball-joint, DN50 [Code number: HL 520]](/system/products/drafts/000/004/700/original/HL_520-draft.jpg?1461294206)
![Draft Hutterer & Lechner Shower trap for shower trays with waste holes d 90mm, without cover plate, DN50 [Code number: HL 520.0]](/system/products/drafts/000/004/701/original/hl_520.0-draft.jpg?1461294095)
![Draft Hutterer & Lechner Flat shower trap for waste holes d 90mm, with stainless steel coverplate d 113mm, with ball-joint, DN40/50 [Code number: HL 520F]](/system/products/drafts/000/011/048/original/HL_520f-draft.jpg?1427155136)
![Draft Hutterer & Lechner Shower trap for waste holes d 90mm and with stainless steel-coverplate d 113mm, ball-joint, DN40/50 [Code number: HL 522]](/system/products/drafts/000/004/702/original/hl_522-draft.jpg?1461294132)
![Draft Hutterer & Lechner Shower trap body for waste holes d 90mm, with ball-joint, DN40/50 [Code number: HL 522.0]](/system/products/drafts/000/004/703/original/HL_522.0-draft.jpg?1461294232)
![Draft Hutterer & Lechner Shower drain with grate frame 121 x 121 mm, for prefabricated shower floors, ball-joint, DN40/50 [Code number: HL 522KE]](/system/products/drafts/000/004/708/original/hl_522ke-draft.jpg?1461294234)