Logo
Ru| En

Office: M. Baumanskaya

Warehouse: Lenin Hills

Domestic sewerage

Home→ Catalog→ Sewerage→ Domestic sewerage

The internal sewerage system is one of the most important engineering systems of the building, and for its installation it is necessary to use high-quality pipes and fittings.

We supply products only from brands that have been proven over the years, producing pipes and fittings made of PVC, PP, cast iron and steel. All products meet all sanitary requirements, are made only from high-quality raw materials and are distinguished by reliability and durability.

This section presents not only pipes with fittings, but also additional equipment needed for sewerage installation:

  • plumbing siphons;
  • traps;
  • shower trays;
  • pipes for toilet bowls;
  • non-return valves;
  • air valves.
Photo Наименование Article Цена
Photo Draft
Photo SINIKON Standart Double branch fitting 45°, PP, d - 110*110*110 [Code number: 506016.R] Draft SINIKON Standart Double branch fitting 45°, PP, d - 110*110*110 [Code number: 506016.R]
SINIKON Standart Double branch fitting 45°, PP, d - 110*110*110 [Code number: 506016.R]
Details 		506016.R 557 rub

Application purposes:

  • For domestic drainage system
  • For branching of the pipeline

Material: Polypropylene (PP)

Warranty: 20 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d d1 d2 Angle Colour
mm mm mm    
110 110 110 45° Gray
Photo Draft
Photo (ARTICLE AMENDED BY 508001.R) - SINIKON Standart T-piece 45°, PP, d - 32, d1 - 32 [Code number: 508001.C] Draft (ARTICLE AMENDED BY 508001.R) - SINIKON Standart T-piece 45°, PP, d - 32, d1 - 32 [Code number: 508001.C]
(ARTICLE AMENDED BY 508001.R) - SINIKON Standart T-piece 45°, PP, d - 32, d1 - 32 [Code number: 508001.C]
Details 		508001.C

Application purposes:

  • For domestic drainage system
  • For changing direction of the pipeline

Material: PP-H polypropylene.

Material density: 0.9-0.95 g/cm3.

Maximum operating temperature: +80 °C (short-term up to +95 °C).

Melting point: +160 °С.

Main advantages of the SINIKON Standard system:

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d Angle Colour
mm    
32x32 45˚ Metallic grey
Photo Draft
Photo SINIKON Standart T-piece 45°, PP, d - 32*32 [Code number: 508001.R] Draft SINIKON Standart T-piece 45°, PP, d - 32*32 [Code number: 508001.R]
SINIKON Standart T-piece 45°, PP, d - 32*32 [Code number: 508001.R]
Details 		508001.R 90 rub

Application purposes:

  • For domestic drainage system
  • For branching of the pipeline

Material: Polypropylene (PP)

Warranty: 20 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d d2 Angle Weight Colour
mm mm   kg  
32 32 45° 0,040 Gray
Photo Draft
Photo (ARTICLE REPLACED BY Trojnik 32/67) - SINIKON Standart T-piece 67°, PP, d - 32*32 [Code number: 508003.R] Draft (ARTICLE REPLACED BY Trojnik 32/67) - SINIKON Standart T-piece 67°, PP, d - 32*32 [Code number: 508003.R]
(ARTICLE REPLACED BY Trojnik 32/67) - SINIKON Standart T-piece 67°, PP, d - 32*32 [Code number: 508003.R]
Details 		508003.R

Application purposes:

  • For domestic drainage system
  • For branching of the pipeline

Material: Polypropylene (PP)

Warranty: 20 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d d2 Angle Weight Colour
mm mm   kg  
32 32 67° 0,040 Gray
Photo Draft
Photo (ARTICLE AMENDED BY 508005.R) - SINIKON Standart T-piece 87°, PP, d - 32, d1 - 32 [Code number: 508005.C] Draft (ARTICLE AMENDED BY 508005.R) - SINIKON Standart T-piece 87°, PP, d - 32, d1 - 32 [Code number: 508005.C]
(ARTICLE AMENDED BY 508005.R) - SINIKON Standart T-piece 87°, PP, d - 32, d1 - 32 [Code number: 508005.C]
Details 		508005.C

Application purposes:

  • For domestic drainage system
  • For branching the pipeline

Material: Polypropylene (PP)

Warranty: 20 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d Angle Colour
mm    
32x32 87˚ Gray
Photo Draft
Photo SINIKON Standart T-piece 87°, PP, d - 32*32 [Code number: 508005.R] Draft SINIKON Standart T-piece 87°, PP, d - 32*32 [Code number: 508005.R]
SINIKON Standart T-piece 87°, PP, d - 32*32 [Code number: 508005.R]
Details 		508005.R 90 rub

Application purposes:

  • For domestic drainage system
  • For branching of the pipeline

Material: Polypropylene (PP)

Warranty: 20 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d d2 Angle Weight Colour
mm mm   kg  
32 32 87° 0,040 Gray
Photo Draft
Photo SINIKON Comfort Plus T-piece 45°, PP, d - 40x40 [Code number: 508007.K] Draft SINIKON Comfort Plus T-piece 45°, PP, d - 40x40 [Code number: 508007.K]
SINIKON Comfort Plus T-piece 45°, PP, d - 40x40 [Code number: 508007.K]
Details 		508007.K 126 rub

Application purposes:

  • For domestic drainage system
  • For buildings with increased noise insulation requirements

Material: homopolymer of propylene PP-H with mineral additives

Warranty: 20 years

Coefficient of linear expansion: 0,11 mm/m °С

Maximum operating temperature: +80 °C (may increase to +95 °C)

Main advantages of the SINIKON Comfort Plus system:

  • Reduced noise level
  • Resistance to silting
  • Resistance to corrosion
  • Tightness of connections
  • Ease of installation
  • Service life - at least 50 years

Technical specifications

d d2 Angle Wall thickness Colour
mm mm   mm  
40 40 45° 2,7 white
Photo Draft
Photo SINIKON Standart T-piece 45°, PP, d - 40*40 [Code number: 508007.R] Draft SINIKON Standart T-piece 45°, PP, d - 40*40 [Code number: 508007.R]
SINIKON Standart T-piece 45°, PP, d - 40*40 [Code number: 508007.R]
Details 		508007.R 90 rub

Application purposes:

  • For domestic drainage system
  • For branching of the pipeline

Material: Polypropylene (PP)

Warranty: 20 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d d2 Angle Weight Colour
mm mm   kg  
40 40 45° 0,065 Gray
Photo Draft
Photo (ARTICLE REPLACED BY Trojnik 40/67) - SINIKON Standart T-piece 67°, PP, d - 40*40 [Code number: 508009.R] Draft (ARTICLE REPLACED BY Trojnik 40/67) - SINIKON Standart T-piece 67°, PP, d - 40*40 [Code number: 508009.R]
(ARTICLE REPLACED BY Trojnik 40/67) - SINIKON Standart T-piece 67°, PP, d - 40*40 [Code number: 508009.R]
Details 		508009.R

Application purposes:

  • For domestic drainage system
  • For branching of the pipeline

Material: Polypropylene (PP)

Warranty: 20 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d d2 Angle Weight Colour
mm mm   kg  
40 40 67° 0,065 Gray
Photo Draft
Photo SINIKON Comfort Plus T-piece 87°, PP, d - 40x40 [Code number: 508011.K] Draft SINIKON Comfort Plus T-piece 87°, PP, d - 40x40 [Code number: 508011.K]
SINIKON Comfort Plus T-piece 87°, PP, d - 40x40 [Code number: 508011.K]
Details 		508011.K 126 rub

Application purposes:

  • For domestic drainage system
  • For buildings with increased noise insulation requirements

Material: homopolymer of propylene PP-H with mineral additives

Warranty: 20 years

Coefficient of linear expansion: 0,11 mm/m °С

Maximum operating temperature: +80 °C (may increase to +95 °C)

Main advantages of the SINIKON Comfort Plus system:

  • Reduced noise level
  • Resistance to silting
  • Resistance to corrosion
  • Tightness of connections
  • Ease of installation
  • Service life - at least 50 years

Technical specifications

d d2 Angle Wall thickness Colour
mm mm   mm  
40 40 87° 2,7 white
Photo Draft
Photo SINIKON Standart T-piece 87°, PP, d - 40*40 [Code number: 508011.R] Draft SINIKON Standart T-piece 87°, PP, d - 40*40 [Code number: 508011.R]
SINIKON Standart T-piece 87°, PP, d - 40*40 [Code number: 508011.R]
Details 		508011.R 90 rub

Application purposes:

  • For domestic drainage system
  • For branching of the pipeline

Material: Polypropylene (PP)

Warranty: 20 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d d2 Angle Weight Colour
mm mm   kg  
40 40 87° 0,065 Gray
Photo Draft
Photo SINIKON Comfort Plus T-piece 45°, PP, d - 50*50 [Code number: 508013.K] Draft SINIKON Comfort Plus T-piece 45°, PP, d - 50*50 [Code number: 508013.K]
SINIKON Comfort Plus T-piece 45°, PP, d - 50*50 [Code number: 508013.K]
Details 		508013.K 140 rub

Application purposes:

  • For domestic drainage system
  • For buildings with increased noise insulation requirements

Material: homopolymer of propylene PP-H with mineral additives

Warranty: 20 years

Coefficient of linear expansion: 0,11 mm/m °С

Maximum operating temperature: +80 °C (may increase to +95 °C)

Main advantages of the SINIKON Comfort Plus system:

  • Reduced noise level
  • Resistance to silting
  • Resistance to corrosion
  • Tightness of connections
  • Ease of installation
  • Service life - at least 50 years

Technical specifications

d d2 Angle Wall thickness Colour
mm mm   mm  
50 50 45° 2,7 white
Photo Draft
Photo SINIKON Standart T-piece 45°, PP, d - 50*50 [Code number: 508013.R] Draft SINIKON Standart T-piece 45°, PP, d - 50*50 [Code number: 508013.R]
SINIKON Standart T-piece 45°, PP, d - 50*50 [Code number: 508013.R]
Details 		508013.R 100 rub

Application purposes:

  • For domestic drainage system
  • For branching of the pipeline

Material: Polypropylene (PP)

Warranty: 20 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d d2 Angle Weight Colour
mm mm   kg  
50 50 45° 0,080 Gray
Photo Draft
Photo SINIKON Standart T-piece 67°, PP, d - 50, d1 - 50 [Code number: 508015CR] Draft SINIKON Standart T-piece 67°, PP, d - 50, d1 - 50 [Code number: 508015CR]
SINIKON Standart T-piece 67°, PP, d - 50, d1 - 50 [Code number: 508015CR]
Details 		508015CR 217 rub

Application purposes:

  • For domestic drainage system
  • For branching the pipeline

Material: PP-H polypropylene.

Material density: 0.9-0.95 g/cm3.

Maximum operating temperature: +80 °C (short-term up to +95 °C).

Melting point: +160 °С.

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d Angle Colour
mm    
50x50 67˚ Gray
Photo Draft
Photo (ARTICLE REPLACEMENT: 508015CR) - SINIKON Standart T-piece 67°, PP, d - 50*50 [Code number: 508015.R] Draft (ARTICLE REPLACEMENT: 508015CR) - SINIKON Standart T-piece 67°, PP, d - 50*50 [Code number: 508015.R]
(ARTICLE REPLACEMENT: 508015CR) - SINIKON Standart T-piece 67°, PP, d - 50*50 [Code number: 508015.R]
Details 		508015.R
ARTICLE REPLACEMENT: 508015CR

Application purposes:

  • For domestic drainage system
  • For branching of the pipeline

Material: Polypropylene (PP)

Warranty: 20 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d d2 Angle Weight Colour
mm mm   kg  
50 50 67° 0,075 Gray
Photo Draft
Photo SINIKON Comfort Plus T-piece 87°, PP, d - 50*50 [Code number: 508017.K] Draft SINIKON Comfort Plus T-piece 87°, PP, d - 50*50 [Code number: 508017.K]
SINIKON Comfort Plus T-piece 87°, PP, d - 50*50 [Code number: 508017.K]
Details 		508017.K 140 rub

Application purposes:

  • For domestic drainage system
  • For buildings with increased noise insulation requirements

Material: homopolymer of propylene PP-H with mineral additives

Warranty: 20 years

Coefficient of linear expansion: 0,11 mm/m °С

Maximum operating temperature: +80 °C (may increase to +95 °C)

Main advantages of the SINIKON Comfort Plus system:

  • Reduced noise level
  • Resistance to silting
  • Resistance to corrosion
  • Tightness of connections
  • Ease of installation
  • Service life - at least 50 years

Technical specifications

d d2 Angle Wall thickness Colour
mm mm   mm  
50 50 87° 2,7 white
Photo Draft
Photo SINIKON Standart T-piece 87°, PP, d - 50*50 [Code number: 508017.R] Draft SINIKON Standart T-piece 87°, PP, d - 50*50 [Code number: 508017.R]
SINIKON Standart T-piece 87°, PP, d - 50*50 [Code number: 508017.R]
Details 		508017.R 100 rub

Application purposes:

  • For domestic drainage system
  • For branching of the pipeline

Material: Polypropylene (PP)

Warranty: 20 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d d2 Angle Weight Colour
mm mm   kg  
50 50 87° 0,070 Gray
Photo Draft
Photo SINIKON Standart T-piece 45˚, PP, d - 75x75 [Code number: 508019.C] Draft SINIKON Standart T-piece 45˚, PP, d - 75x75 [Code number: 508019.C]
SINIKON Standart T-piece 45˚, PP, d - 75x75 [Code number: 508019.C]
Details 		508019.C

Application purposes:

  • For domestic drainage system
  • For branching of the pipeline

Material: Polypropylene (PP)

Warranty: 20 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d d1 Angle Colour
mm mm    
75 75 45˚ Gray
Photo Draft
Photo SINICON Standard T-piece 45°, PP, d - 75, d1 - 75 [Code number: 508019CR] Draft SINICON Standard T-piece 45°, PP, d - 75, d1 - 75 [Code number: 508019CR]
SINICON Standard T-piece 45°, PP, d - 75, d1 - 75 [Code number: 508019CR]
Details 		508019CR 332 rub

Application purposes:

  • For domestic drainage system
  • For branching the pipeline

Material: PP-H polypropylene.

Material density: 0.9-0.95 g/cm3.

Maximum operating temperature: +80 °C (short-term up to +95 °C).

Melting point: +160 °С.

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d Angle Colour
mm    
75x75 45˚ Gray
Photo Draft
Photo (REPLACEMENT: 508019.C) - SINIKON Standart T-piece 45°, PP, d - 75x75 [Code number: 508019.R] Draft (REPLACEMENT: 508019.C) - SINIKON Standart T-piece 45°, PP, d - 75x75 [Code number: 508019.R]
(REPLACEMENT: 508019.C) - SINIKON Standart T-piece 45°, PP, d - 75x75 [Code number: 508019.R]
Details 		508019.R

Application purposes:

  • For domestic drainage system
  • For branching of the pipeline

Material: Polypropylene (PP)

Warranty: 10 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d d2 Angle Weight Colour
mm mm   kg  
75 75 45° 0,182 Gray
© Inrusstrade.ru 1999-2025. "Inrusstrade" Ltd. Copying and quoting is prohibited