Logo
Ru| En

Office: M. Baumanskaya

Warehouse: Lenin Hills

Domestic sewerage

Home→ Catalog→ Sewerage→ Domestic sewerage

The internal sewerage system is one of the most important engineering systems of the building, and for its installation it is necessary to use high-quality pipes and fittings.

We supply products only from brands that have been proven over the years, producing pipes and fittings made of PVC, PP, cast iron and steel. All products meet all sanitary requirements, are made only from high-quality raw materials and are distinguished by reliability and durability.

This section presents not only pipes with fittings, but also additional equipment needed for sewerage installation:

  • plumbing siphons;
  • traps;
  • shower trays;
  • pipes for toilet bowls;
  • non-return valves;
  • air valves.
Photo Наименование Article Цена
Photo Draft
Photo SINIKON Standart T-piece 45°, PP, d - 32*32 [Code number: 508001.R] Draft SINIKON Standart T-piece 45°, PP, d - 32*32 [Code number: 508001.R]
SINIKON Standart T-piece 45°, PP, d - 32*32 [Code number: 508001.R]
Details 		508001.R 99 rub

Application purposes:

  • For domestic drainage system
  • For branching of the pipeline

Material: Polypropylene (PP)

Warranty: 20 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d d2 Angle Weight Colour
mm mm   kg  
32 32 45° 0,040 Gray
Photo Draft
Photo SINIKON Standart T-piece 87°, PP, d - 32*32 [Code number: 508005.R] Draft SINIKON Standart T-piece 87°, PP, d - 32*32 [Code number: 508005.R]
SINIKON Standart T-piece 87°, PP, d - 32*32 [Code number: 508005.R]
Details 		508005.R 99 rub

Application purposes:

  • For domestic drainage system
  • For branching of the pipeline

Material: Polypropylene (PP)

Warranty: 20 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d d2 Angle Weight Colour
mm mm   kg  
32 32 87° 0,040 Gray
Photo Draft
Photo SINIKON Comfort Plus T-piece 45°, PP, d - 40x40 [Code number: 508007.K] Draft SINIKON Comfort Plus T-piece 45°, PP, d - 40x40 [Code number: 508007.K]
SINIKON Comfort Plus T-piece 45°, PP, d - 40x40 [Code number: 508007.K]
Details 		508007.K 139 rub

Application purposes:

  • For domestic drainage system
  • For buildings with increased noise insulation requirements

Material: homopolymer of propylene PP-H with mineral additives

Warranty: 20 years

Coefficient of linear expansion: 0,11 mm/m °С

Maximum operating temperature: +80 °C (may increase to +95 °C)

Main advantages of the SINIKON Comfort Plus system:

  • Reduced noise level
  • Resistance to silting
  • Resistance to corrosion
  • Tightness of connections
  • Ease of installation
  • Service life - at least 50 years

Technical specifications

d d2 Angle Wall thickness Colour
mm mm   mm  
40 40 45° 2,7 white
Photo Draft
Photo SINIKON Standart T-piece 45°, PP, d - 40*40 [Code number: 508007.R] Draft SINIKON Standart T-piece 45°, PP, d - 40*40 [Code number: 508007.R]
SINIKON Standart T-piece 45°, PP, d - 40*40 [Code number: 508007.R]
Details 		508007.R 99 rub

Application purposes:

  • For domestic drainage system
  • For branching of the pipeline

Material: Polypropylene (PP)

Warranty: 20 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d d2 Angle Weight Colour
mm mm   kg  
40 40 45° 0,065 Gray
Photo Draft
Photo SINIKON Comfort Plus T-piece 87°, PP, d - 40x40 [Code number: 508011.K] Draft SINIKON Comfort Plus T-piece 87°, PP, d - 40x40 [Code number: 508011.K]
SINIKON Comfort Plus T-piece 87°, PP, d - 40x40 [Code number: 508011.K]
Details 		508011.K 139 rub

Application purposes:

  • For domestic drainage system
  • For buildings with increased noise insulation requirements

Material: homopolymer of propylene PP-H with mineral additives

Warranty: 20 years

Coefficient of linear expansion: 0,11 mm/m °С

Maximum operating temperature: +80 °C (may increase to +95 °C)

Main advantages of the SINIKON Comfort Plus system:

  • Reduced noise level
  • Resistance to silting
  • Resistance to corrosion
  • Tightness of connections
  • Ease of installation
  • Service life - at least 50 years

Technical specifications

d d2 Angle Wall thickness Colour
mm mm   mm  
40 40 87° 2,7 white
Photo Draft
Photo SINIKON Standart T-piece 87°, PP, d - 40*40 [Code number: 508011.R] Draft SINIKON Standart T-piece 87°, PP, d - 40*40 [Code number: 508011.R]
SINIKON Standart T-piece 87°, PP, d - 40*40 [Code number: 508011.R]
Details 		508011.R 99 rub

Application purposes:

  • For domestic drainage system
  • For branching of the pipeline

Material: Polypropylene (PP)

Warranty: 20 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d d2 Angle Weight Colour
mm mm   kg  
40 40 87° 0,065 Gray
Photo Draft
Photo SINIKON Comfort Plus T-piece 45°, PP, d - 50*50 [Code number: 508013.K] Draft SINIKON Comfort Plus T-piece 45°, PP, d - 50*50 [Code number: 508013.K]
SINIKON Comfort Plus T-piece 45°, PP, d - 50*50 [Code number: 508013.K]
Details 		508013.K 154 rub

Application purposes:

  • For domestic drainage system
  • For buildings with increased noise insulation requirements

Material: homopolymer of propylene PP-H with mineral additives

Warranty: 20 years

Coefficient of linear expansion: 0,11 mm/m °С

Maximum operating temperature: +80 °C (may increase to +95 °C)

Main advantages of the SINIKON Comfort Plus system:

  • Reduced noise level
  • Resistance to silting
  • Resistance to corrosion
  • Tightness of connections
  • Ease of installation
  • Service life - at least 50 years

Technical specifications

d d2 Angle Wall thickness Colour
mm mm   mm  
50 50 45° 2,7 white
Photo Draft
Photo SINIKON Standart T-piece 45°, PP, d - 50*50 [Code number: 508013.R] Draft SINIKON Standart T-piece 45°, PP, d - 50*50 [Code number: 508013.R]
SINIKON Standart T-piece 45°, PP, d - 50*50 [Code number: 508013.R]
Details 		508013.R 110 rub

Application purposes:

  • For domestic drainage system
  • For branching of the pipeline

Material: Polypropylene (PP)

Warranty: 20 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d d2 Angle Weight Colour
mm mm   kg  
50 50 45° 0,080 Gray
Photo Draft
Photo SINIKON Standart T-piece 67°, PP, d - 50, d1 - 50 [Code number: 508015CR] Draft SINIKON Standart T-piece 67°, PP, d - 50, d1 - 50 [Code number: 508015CR]
SINIKON Standart T-piece 67°, PP, d - 50, d1 - 50 [Code number: 508015CR]
Details 		508015CR 243 rub

Application purposes:

  • For domestic drainage system
  • For branching the pipeline

Material: PP-H polypropylene.

Material density: 0.9-0.95 g/cm3.

Maximum operating temperature: +80 °C (short-term up to +95 °C).

Melting point: +160 °С.

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d Angle Colour
mm    
50x50 67˚ Gray
Photo Draft
Photo SINIKON Comfort Plus T-piece 87°, PP, d - 50*50 [Code number: 508017.K] Draft SINIKON Comfort Plus T-piece 87°, PP, d - 50*50 [Code number: 508017.K]
SINIKON Comfort Plus T-piece 87°, PP, d - 50*50 [Code number: 508017.K]
Details 		508017.K 154 rub

Application purposes:

  • For domestic drainage system
  • For buildings with increased noise insulation requirements

Material: homopolymer of propylene PP-H with mineral additives

Warranty: 20 years

Coefficient of linear expansion: 0,11 mm/m °С

Maximum operating temperature: +80 °C (may increase to +95 °C)

Main advantages of the SINIKON Comfort Plus system:

  • Reduced noise level
  • Resistance to silting
  • Resistance to corrosion
  • Tightness of connections
  • Ease of installation
  • Service life - at least 50 years

Technical specifications

d d2 Angle Wall thickness Colour
mm mm   mm  
50 50 87° 2,7 white
Photo Draft
Photo SINIKON Standart T-piece 87°, PP, d - 50*50 [Code number: 508017.R] Draft SINIKON Standart T-piece 87°, PP, d - 50*50 [Code number: 508017.R]
SINIKON Standart T-piece 87°, PP, d - 50*50 [Code number: 508017.R]
Details 		508017.R 110 rub

Application purposes:

  • For domestic drainage system
  • For branching of the pipeline

Material: Polypropylene (PP)

Warranty: 20 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d d2 Angle Weight Colour
mm mm   kg  
50 50 87° 0,070 Gray
Photo Draft
Photo SINICON Standard T-piece 45°, PP, d - 75, d1 - 75 [Code number: 508019CR] Draft SINICON Standard T-piece 45°, PP, d - 75, d1 - 75 [Code number: 508019CR]
SINICON Standard T-piece 45°, PP, d - 75, d1 - 75 [Code number: 508019CR]
Details 		508019CR 371 rub

Application purposes:

  • For domestic drainage system
  • For branching the pipeline

Material: PP-H polypropylene.

Material density: 0.9-0.95 g/cm3.

Maximum operating temperature: +80 °C (short-term up to +95 °C).

Melting point: +160 °С.

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d Angle Colour
mm    
75x75 45˚ Gray
Photo Draft
Photo SINIKON Standart T-piece 67˚, PP, d - 75x75 [Code number: 508021.C] Draft SINIKON Standart T-piece 67˚, PP, d - 75x75 [Code number: 508021.C]
SINIKON Standart T-piece 67˚, PP, d - 75x75 [Code number: 508021.C]
Details 		508021.C 274 rub

Application purposes:

  • For domestic drainage system
  • For branching of the pipeline

Material: Polypropylene (PP)

Warranty: 20 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d d1 Angle Colour
mm mm    
75 75 67˚ Gray
Photo Draft
Photo SINICON Standard T-piece 87°, d - 75, d1 - 75 [Code number: 508023CR] Draft SINICON Standard T-piece 87°, d - 75, d1 - 75 [Code number: 508023CR]
SINICON Standard T-piece 87°, d - 75, d1 - 75 [Code number: 508023CR]
Details 		508023CR 371 rub
Photo Draft
Photo SINIKON Standart T-piece 87°, PP, d - 75, d1 - 75 [Code number: 508023.R] Draft SINIKON Standart T-piece 87°, PP, d - 75, d1 - 75 [Code number: 508023.R]
SINIKON Standart T-piece 87°, PP, d - 75, d1 - 75 [Code number: 508023.R]
Details 		508023.R 245 rub

Application purposes:

  • For domestic drainage system
  • For branching of the pipeline

Material: Polypropylene (PP)

Warranty: 20 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d d2 Angle Weight Colour
mm mm   kg  
75 75 87° 0,141 Gray
Photo Draft
Photo SINIKON Comfort Plus T-piece 45°, PP, d - 110*110 [Code number: 508025.K] Draft SINIKON Comfort Plus T-piece 45°, PP, d - 110*110 [Code number: 508025.K]
SINIKON Comfort Plus T-piece 45°, PP, d - 110*110 [Code number: 508025.K]
Details 		508025.K 400 rub

Application purposes:

  • For domestic drainage system
  • For buildings with increased noise insulation requirements

Material: homopolymer of propylene PP-H with mineral additives

Warranty: 20 years

Coefficient of linear expansion: 0,11 mm/m °С

Maximum operating temperature: +80 °C (may increase to +95 °C)

Reinforced fitting with increased wall thickness.

Main advantages of the SINIKON Comfort Plus system:

  • Reduced noise level
  • Resistance to silting
  • Resistance to corrosion
  • Tightness of connections
  • Ease of installation
  • Service life - at least 50 years

Technical specifications

d d2 Angle Wall thickness Colour
mm mm   mm  
110 110 45° 3,4 white
Photo Draft
Photo SINIKON Standart T-piece 45°, PP, d - 110*110 [Code number: 508025.R] Draft SINIKON Standart T-piece 45°, PP, d - 110*110 [Code number: 508025.R]
SINIKON Standart T-piece 45°, PP, d - 110*110 [Code number: 508025.R]
Details 		508025.R 285 rub

Application purposes:

  • For domestic drainage system
  • For branching of the pipeline

Material: Polypropylene (PP)

Warranty: 20 years

Coefficient of linear expansion: 0,15 mm/m °С

Minimum operating temperature: -10 °C

Maximum working temperature: +90 °С

The main advantages of the SINIKON Standard system

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d d2 Angle Weight Colour
mm mm   kg  
110 110 45° 0,385 Gray
Photo
Photo SINIKON Universal T-piece 45° for outdoor sewage, PP, d - 110*110 [Code number: 508025.U]
SINIKON Universal T-piece 45° for outdoor sewage, PP, d - 110*110 [Code number: 508025.U]
Details 		508025.U 334 rub

Application purposes:

  • For domestic drainage system
  • For outdoor drainage system
  • For storm water drainage system
  • For branching the pipeline

Material: homopolymer of propylene PP-H

Warranty: 20 years

Maximum continuous temperature of waste water: +80 °С

Maximum short-term of waste water: +95 °С

Service life: not less than 50 years

The main advantages of the SINIKON Universal system:

  • High chemical resistance
  • Corrosion resistance
  • Does not conduct electricity
  • Tightness of connections
  • Low roughness coefficient
  • Resistance to hydroabrasive wear
  • Resistance to impact (including at low temperatures)
  • Ease of installation
  • Service life - at least 50 years

Technical specifications

d Angle Colour
mm    
110*110 45° brown
Photo Draft
Photo SINICON Standard T-piece 67°, PP, d - 110, d1 - 110 [Code number: 508027CR] Draft SINICON Standard T-piece 67°, PP, d - 110, d1 - 110 [Code number: 508027CR]
SINICON Standard T-piece 67°, PP, d - 110, d1 - 110 [Code number: 508027CR]
Details 		508027CR 374 rub

Application purposes:

  • For domestic drainage system
  • For changing direction of the pipeline

Material: PP-H polypropylene.

Material density: 0.9-0.95 g/cm3.

Maximum operating temperature: +80 °C (short-term up to +95 °C).

Melting point: +160 °С.

Main advantages of the SINIKON Standard system:

  • Smooth inner surface
  • Corrosion resistance
  • Tightness of connections
  • Frost resistance
  • Low weight
  • Economy
  • Easy installation
  • Lifetime at least 50 years
d Angle Colour
mm    
110x110 67˚ Metallic grey
Photo Draft
Photo SINIKON Comfort Plus T-piece 87°, PP, d - 110*110 [Code number: 508029.K] Draft SINIKON Comfort Plus T-piece 87°, PP, d - 110*110 [Code number: 508029.K]
SINIKON Comfort Plus T-piece 87°, PP, d - 110*110 [Code number: 508029.K]
Details 		508029.K 400 rub

Application purposes:

  • For domestic drainage system
  • For buildings with increased noise insulation requirements

Material: homopolymer of propylene PP-H with mineral additives

Warranty: 20 years

Coefficient of linear expansion: 0,11 mm/m °С

Maximum operating temperature: +80 °C (may increase to +95 °C)

Reinforced fitting with increased wall thickness.

Main advantages of the SINIKON Comfort Plus system:

  • Reduced noise level
  • Resistance to silting
  • Resistance to corrosion
  • Tightness of connections
  • Ease of installation
  • Service life - at least 50 years

Technical specifications

d d2 Angle Wall thickness Colour
mm mm   mm  
110 110 87° 3,4 white
© Inrusstrade.ru 1999-2026. "Inrusstrade" Ltd. Copying and quoting is prohibited