Logo
Ru| En

Office: M. Baumanskaya

Warehouse: Leninsky urban district

Loading

Domestic sewerage

The internal sewerage system is one of the most important engineering systems of the building, and for its installation it is necessary to use high-quality pipes and fittings.

We supply products only from brands that have been proven over the years, producing pipes and fittings made of PVC, PP, cast iron and steel. All products meet all sanitary requirements, are made only from high-quality raw materials and are distinguished by reliability and durability.

This section presents not only pipes with fittings, but also additional equipment needed for sewerage installation:

  • plumbing siphons;
  • traps;
  • shower trays;
  • pipes for toilet bowls;
  • non-return valves;
  • air valves.
Photo Наименование Article Цена
RTP BETA T-piece 45° for non-pressure domestic sewage, for socket, PP, d - 110, d1 - 50 [Code number: 36573]
Details
36573 (RTP) 198 rub
Geberit HDPE Complete Screw-Threaded Joint, d75 [Code number: 365.740.16.1]
Details
365.740.16.1

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For building drainage

Characteristics:

  • UV-resistant
  • Seal made of EPDM
  • Compression ring made of PP
  • Union nut made of PP

Scope of delivery:

  • Protective cap

Material: PE-HD

d Rg D H h h1 h2
mm " cm cm cm cm cm
75 95 x 1/6 11.2 9.6 4.5 7.5 2.5
Geberit HDPE loose flange, d75 [Code number: 365.745.00.1]
Details
365.745.00.1

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For building drainage
  • For combining with Geberit HDPE weld-neck collars

Characteristics:

  • Plastic coated

Material: Steel

d D k m H n PN
mm cm cm cm cm Pc. bar
75 18.5 14.5 1.8 1.2 4 10
Geberit HDPE blind flange, d75 [Code number: 365.748.00.1]
Details
365.748.00.1

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For building drainage

Characteristics:

  • Plastic coated

Material: Steel

d D k m H n PN
mm cm cm cm cm Pc. bar
75 18.5 14.5 1.8 1.2 4 10
RTP BETA T-piece 87° for non-pressure domestic sewage, for socket, PP, d - 110, d1 - 110 [Code number: 36574]
Details
36574 (RTP) 264 rub
Geberit HDPE Threaded connector with screw cap, d75 [Code number: 365.750.16.1]
Details
365.750.16.1

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For building drainage

Characteristics:

  • UV-resistant
  • With seal made of EPDM
  • Screw cap made of PP

Material: PE-HD

d Rg D H h h1 h2
mm " cm cm cm cm cm
75 95 x 1/6 11.2 9.6 4.5 7.5 2.5
RTP BETA T-piece 45° for sewer, d - 110, d1 - 110 [Code number: 36575]
Details
36575 (RTP) 293 rub
RTP BETA Drain horizontal with dry lock (with float), white, d - 110 (150х150 mm) [Code number: 36576]
Details
36576 (RTP) 608 rub
Geberit HDPE Flange bushing, d75 [Code number: 365.772.16.1]
Details
365.772.16.1

ATTENTION! This product is temporarily unavailable for order!

Application purpose:

  • For all drainage pipes

Characteristics:

  • UV-resistant

Material: PE-HD

d D H h
mm cm cm cm
75 9 7,2 3,4
Geberit HDPE Screw cap, d75 [Code number: 365.781.16.1]
Details
365.781.16.1

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For building drainage

Characteristics:

  • With seal made of EPDM

Material: PP

d Rg D H
mm " cm cm
75 95 x 1/6 11.2 4.5
RTP BETA Drain horizontal with dry lock (with float), white, d - 50 (150х150 mm) [Code number: 36578]
Details
36578 (RTP) 253 rub
RTP BETA Drain horizontal with dry lock (with float), grey, d - 50 (100х100 mm) [Code number: 36579]
Details
36579 (RTP) 210 rub
Geberit HDPE Protective cap for pipe end, d75 [Code number: 365.802.92.1]
Details
365.802.92.1

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For building drainage
  • For protecting pipe ends

Material: PE-LD

d D H Colour / Surface
mm cm cm  
75 7.8 3.5 yellow
RTP BETA Drain horizontal, white, d - 110 (150х150 mm) [Code number: 36580]
Details
36580 (RTP) 358 rub
Geberit HDPE Weld-on cap, d75 [Code number: 365.812.16.1]
Details
365.812.16.1

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For building drainage
  • For butt welding

Characteristics:

  • UV-resistant

Material: PE-HD

d Colour / Surface
mm  
75 black
RTP BETA Drain horizontal, white, d - 50 (150х150 mm) [Code number: 36581]
Details
36581 (RTP) 189 rub
RTP BETA Drain vertical, white, d - 110 (150х150 mm) [Code number: 36583]
Details
36583 (RTP) 243 rub
RTP BETA Drain vertical, white, d - 50 (150х150 mm) [Code number: 36584]
Details
36584 (RTP) 189 rub
RTP BETA Drain vertical with dry lock (with float), white, d - 110 (150х150 mm) [Code number: 36585]
Details
36585 (RTP) 413 rub

Purpose of application:

  • For domestic sewage
  • For drains with a constant temperature up to +80ºС
  • For drainage from floor level

Characteristics:

  • production material - polypropylene and propylene copolymers;
  • resistance to high temperatures;
  • corrosion resistance;
  • good soundproofing properties;
  • high sanitary and hygienic properties;
  • resistance to chemical compounds;
  • smooth, not changing over time, the inner sides of the walls;
  • light weight;
  • simple mounting;
  • high thermal insulation properties;
  • service life: 50 years.

Technical characteristics

D1 D2 Z L L1
mm mm mm mm mm
110 138 146 116 50

Weight: 0,261 kg.

Documentation

Download product datasheet: RTP Internal Sewerage

RTP BETA Drain vertical with dry lock (with float), white, d - 50 (150х150 mm) [Code number: 36586]
Details
36586 (RTP) 236 rub