Drains for internal premises can be divided by area of application. So this group of products includes drains for basements, drains for internal premises, drains for shower zones, including drains which are installed into walls or floors.
Drains for internal premises can be connected to plumbing fixtures. These drains have high capacity which, depending on the model, can reach 2.75 l/s. Visible parts of all the drains have the elaborate design. The drains are equipped with additional equipment, for example, strainers, "dry" siphons etc.
The capacity of the drains for basements and technical rooms can be up to 2.5 l/s. The drains are equipped with strainers, additional outlets, check valves etc. They are characterized by an increased permissible load - they withstand load up to 15 tons.
Drains for shower zones are installed in the floor or in the wall, and drains installed in the wall increase the visual space of the shower zone and they do not break pattern tiles.
Also the group of products includes spare parts for drains:
Photo | Name | Article | Price | |||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Hutterer & Lechner Floor drain body with flange, trap seal and cleaning eye, horizontal, DN75 [Code number: HL 72.1K]
Details
|
HL 72.1K | 8 883 rub | ||||||||||||||||||||||||||||||||||||||||||||||
Application area:
Characteristics:
Weight: 0,524 kg Packaging data (carton)
|
||||||||||||||||||||||||||||||||||||||||||||||||
Hutterer & Lechner Floor drain body with bitumen membrane d 500 mm, horizontal, DN75 [Code number: HL 72.1KH]
Details
|
HL 72.1KH | 18 997 rub | ||||||||||||||||||||||||||||||||||||||||||||||
Application area:
Characteristics:
Weight: 1,577 kg Packaging data (carton)
|
||||||||||||||||||||||||||||||||||||||||||||||||
Hutterer & Lechner Floor drain with flange, trap seal, cut-to-size grate frame, horizontal, DN75/110 [Code number: HL 72.1N]
Details
|
HL 72.1N | 12 771 rub | ||||||||||||||||||||||||||||||||||||||||||||||
Floor drain HL 72.1N has horizontal outlet DN75/110. The floor drain is equipped with cut-to-size grate frame plastic 20 - 70 mm, grate 147х147 mm, strainer for catching debris, flange, cleaning eye and trap seal. Depth of trap seal is 60 mm. Capacity is 1.5 l/s. Load class is K - 300 kg.
Material of spare parts
Packaging data (carton)
Download data sheet: |
||||||||||||||||||||||||||||||||||||||||||||||||
Hutterer & Lechner Basement drain body, horizontal, DN110 [Code number: HL 72K/1]
Details
|
HL 72K/1 | 2 279 rub | ||||||||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||||||||||
Hutterer & Lechner Basement drain with trap seal, cut-to-size plastic grate frame, horizontal, DN110 [Code number: HL 72N]
Details
|
HL 72N | 9 872 rub | ||||||||||||||||||||||||||||||||||||||||||||||
Basement drain HL 72N is made of polypropylene. It is installed in the basements and technical areas. The drain is connected to pipes DN110, its capacity is 1,6 l/s. It can withstand load up to 300 kg. The drain is equipped with trap seal, cut-to-size grate frame 19 - 65 mm / 148 x 148 mm and grate 138 x 138 mm. Height of trap seal is 60 mm.
Material of spare parts
Packaging data (carton)
Download data sheet: |
||||||||||||||||||||||||||||||||||||||||||||||||
Hutterer & Lechner Plug-in drain, not socket, DN110 [Code number: HL 73.0]
Details
|
HL 73.0 | 10 684 rub | ||||||||||||||||||||||||||||||||||||||||||||||
Application area:
Characteristics:
It has alternatives: HL 73.2, HL 73Pr. The drain is universal, suitable for installation on balconies and terraces. Connects to any socketless pipes. There is an odor-locking valve, the grill is attached using the "CLICK-CLAK" system. Supplied with an assembly plug. Weight: 0,397 kg Packaging data (carton)
|
||||||||||||||||||||||||||||||||||||||||||||||||
Hutterer & Lechner Plug-in drain with frost-proof stench flap, not socket, DN110 [Code number: HL 73.2]
Details
|
HL 73.2 | 12 054 rub | ||||||||||||||||||||||||||||||||||||||||||||||
Application area:
Characteristics:
It has alternatives: HL 73.0, HL 73Pr. The drain is universal, suitable for installation on balconies and terraces. Connects to any socketless pipes. There is an odor-locking valve, the grill is attached using the "CLICK-CLAK" system. Supplied with an assembly plug. Weight: 0,447 kg Packaging data (carton)
|
||||||||||||||||||||||||||||||||||||||||||||||||
Hutterer & Lechner Plug-in drain Primus, not socket, DN110 [Code number: HL 73Pr]
Details
|
HL 73Pr | 12 451 rub | ||||||||||||||||||||||||||||||||||||||||||||||
Plug-in drain Primus HL 73Pr is designed for installation indoors without waterproofing. Service life of the drain is not less than 50 years. Temperature of waste water should not exceed +85 °C and for a short period of time it can rise up to 100 °C. The drain is equipped with "Primus" trap, stainless steel frame 121 x 121 mm, system "Klick-Klack" and grate 115 x 115 mm. Capacity is 0,46 l/s. The drain can endure load up to 300 kg.
Material of spare parts
Packaging data (carton)
Download example of use: |
||||||||||||||||||||||||||||||||||||||||||||||||
Hutterer & Lechner Basement drain with removable triple anti-flood valve, horizontal, DN110 [Code number: HL 77]
Details
|
HL 77 | 36 558 rub | ||||||||||||||||||||||||||||||||||||||||||||||
Basement drain HL 77 is installed in the basements or technical areas. It connects topipes with diameter of 110 mm. The drain is equipped with removable triple anti-flood valve (2 x automatically, 1 x manual blocking), 2-piece plastic grate 180 x 250 mm and bucket. Capacity is 1,58 l/s. Depth of trap seal is 60 mm. Outlet is horizontal.
Material of spare parts
Packaging data (carton)
Download data sheet: |
||||||||||||||||||||||||||||||||||||||||||||||||
Hutterer & Lechner Basement drain with inlet DN50, removable triple anti-flood valve, horizontal, DN110 [Code number: HL 77.1]
Details
|
HL 77.1 | 44 487 rub | ||||||||||||||||||||||||||||||||||||||||||||||
Basement drain HL 77.1 is installed in the basements or technical areas. Diameter of outlet is 110 mm and diameter of inlet is 50 mm. The drain is equipped with removable triple anti-flood valve (2 x automatically, 1 x manual blocking), 2-piece plastic grate 180 x 250 mm and bucket. Capacity is 1,58 l/s. Depth of trap seal is 60 mm.
Material of spare parts
Packaging data (carton)
Download data sheet: |
||||||||||||||||||||||||||||||||||||||||||||||||
Hutterer & Lechner Drain body for balcony and terrace, without flange, with frost-proof flap seal (Russia) [Code number: HL 80.0K]
Details
|
HL 80.0K | 3 347 rub | ||||||||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||||||||||
Hutterer & Lechner Floor drain with trap seal, ball-joint, DN50/75 [Code number: HL 80.1] (Russia)
Details
|
HL 80.1 | 7 068 rub | ||||||||||||||||||||||||||||||||||||||||||||||
Floor drain HL 80.1 has ball-joint outlet (for horizontal and vertical use). Diameter of the drain is 50/75 mm, its weight is 625 grams.Capacity is 0.5 l/s, device can endure load up to 300 kg. The floor drain have a grate 115*115 mm and plastic grate frame 123*123 mm. Depth of trap seal is 50 mm. The floor drain disposes effluents from the floor level and waterproofing, and temperature of effluents should be below 85 °C. Height of the grate frame can be adjusted from the smallest to largest.
Material of spare parts
Packaging data (carton)
Download example of use: |
||||||||||||||||||||||||||||||||||||||||||||||||
Hutterer & Lechner Floor drain with trap seal, ball-joint, with extension KLICK-KLACK, ball-joint, DN50/75 [Code number: HL 80.1-3000] (Russia)
Details
|
HL 80.1-3000 | 11 403 rub | ||||||||||||||||||||||||||||||||||||||||||||||
Floor drain HL 80.1-3000 is designed for installation inside buildings. It has ball-joint outlet DN50/75. The drain has grate 115*115 mm - it is made of stainless steel. Size of grate frame is 123*123 mm. Capacity is 0,5 l/s. The drain can endure load up to 300 kg. Also the drain is equipped with bitumen membrane trap seal. Operating temperature is +85°С, and it can increase up to.+100°С for short time period.
Material of spare parts
Packaging data (carton)
|
||||||||||||||||||||||||||||||||||||||||||||||||
Hutterer & Lechner Floor drain as #HL80.1, ball-joint, but with KLICK-KLAK [Code number: HL 80.1-3000.3*]
Details
|
HL 80.1-3000.3* | 29 598 rub | ||||||||||||||||||||||||||||||||||||||||||||||
Application area:
Characteristics:
Weight: 0,625 kg Packaging data (carton)
|
||||||||||||||||||||||||||||||||||||||||||||||||
Hutterer & Lechner Floor drain CeraDrain ball-joint with polymer concrete collar and trap seal, DN50/75 [Code number: HL 80.1C]
Details
|
HL 80.1C | 38 685 rub | ||||||||||||||||||||||||||||||||||||||||||||||
Floor drain HL 80.1C has ball-joint outlet (for horizontal and vertical use). Diameter of the drain is 50/75 mm, its weight is 6100 grams.Capacity is 0.5 l/s, device can endure load up to 300 kg. The floor drain is equipped with a grate 115*115 mm and plastic grate frame 123*123 mm, steel mesh and CeraDrain collar with polymer concrete collar. Depth of trap seal is 50 mm.
Material of spare parts
Packaging data (carton)
Download example of use: |
||||||||||||||||||||||||||||||||||||||||||||||||
Hutterer & Lechner Floor drain, ball-joint, with bitumen membrane and trap seal, DN50/75 [Code number: HL 80.1H]
Details
|
HL 80.1H | 14 992 rub | ||||||||||||||||||||||||||||||||||||||||||||||
Floor drain HL 80.1H has ball-joint outlet (for horizontal and vertical use) and bitumen membrane d 420 mm. Diameter of the drain is 50/75 mm, its weight is 1195 grams.Capacity is 0.5 l/s, device can endure load up to 300 kg. The floor drain is equipped with a grate 115*115 mm, grate frame 123*123 mm and trap seal.
Material of spare parts
Packaging data (carton)
Download example of use: |
||||||||||||||||||||||||||||||||||||||||||||||||
Hutterer & Lechner Floor drain as HL 80.1H, but with extension KLICK-KLACK [Code number: HL 80.1H-3000]
Details
|
HL 80.1H-3000 | 18 646 rub | ||||||||||||||||||||||||||||||||||||||||||||||
Floor drain HL 80.1H-3000 is designed for installation inside buildings. It has ball-joint outlet DN50/75. The drain has grate 115*115 mm - it is made of stainless steel. Size of grate frame is 123*123 mm. Capacity is 0,5 l/s. The drain can endure load up to 300 kg. Also the drain is equipped with extension KLICK-KLACK. Height of trap seal is 50 mm.
Material of spare parts
Packaging data (carton)
|
||||||||||||||||||||||||||||||||||||||||||||||||
Hutterer & Lechner Floor drain with bitumen membrane, with decorative grating for tiling, ball-joint, DN50/75 [Code number: HL 80.1H-3020]
Details
|
HL 80.1H-3020 | 24 201 rub | ||||||||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||||||||||
Hutterer & Lechner Floor drain with bitumen membrane and trap seal, ball-joint, DN50/75 [Code number: HL 80.1HR]
Details
|
HL 80.1HR | 17 394 rub | ||||||||||||||||||||||||||||||||||||||||||||||
Floor drain HL 80.1HR has ball-joint outlet (for horizontal and vertical use) and bitumen membrane d 420 mm. Diameter of the drain is 50/75 mm, its weight is 1220 grams.Capacity is 0.5 l/s, device can endure load up to 300 kg. The floor drain is equipped with a plate d 112 mm, cut-to-size plastic extension 20 - 73 mm with frame round d 131 mm and trap seal.
Material of spare parts
Packaging data (carton)
Download example of use: |
||||||||||||||||||||||||||||||||||||||||||||||||
Hutterer & Lechner Floor drain, ball-joint with trap seal, round d 133mm, DN50/75 [Code number: HL 80.1R]
Details
|
HL 80.1R | 10 743 rub | ||||||||||||||||||||||||||||||||||||||||||||||
Floor drain HL 80.1R has ball-joint outlet (for horizontal and vertical use) and flange. Diameter of the drain is 50/75 mm, its weight is 650 grams.Capacity is 0.5 l/s, device can endure load up to 300 kg. The floor drain is equipped with a plate d 112 mm, cut-to-size extension 20 - 73 mm with frame round d 133 mm and trap seal.
Material of spare parts
Packaging data (carton)
Download example of use: |