Logo
Ru| En

Fittings for water supply

Home→ Catalog→ Equipment for water supply→ Fittings for water supply

The pipeline for water supply systems must have certain characteristics. For example, pipes and fittings for water supply systems must be safe for people and they must have high corrosion resistance which will adversely affect the quality of the supplied water.

The group of products includes fittings for water supply systems, including drinking water, of the highest quality:

  • Fittings Wavin Future K1 - this system is mounted by pressing, is made of mineral-reinforced polypropylene;
  • Geberit Mapress fittings can be made of several types of steel, in particular stainless steel and carbon steel. All fittings of this pipeline system are resistant to corrosion and strength. Depending on the type, Geberit Mapress fittings for water systems withstand pressure up to 16 bar;
  • REHAU RAUTITAN fittings are made of brass, stainless steel and polymeric material PPSU (polyphenylsulfone), they can be threadless and threaded. They are connect to pipes and other fittings using special compression sleeves which provide a completely sealed connection;
  • Geberit Mepla fittings - this multilayer piping system has been tested according to EN ISO 21003 and meets all modern standards. Fittings are equipped with marking of the insert depth - it allows to control the installation and speeds up it. They are made of brass, red brass and PVDF;
  • Wavin Ecoplastik fittings are made of mineral-reinforced polypropylene, while they can be completely plastic and have threads and other elements made of nickel-plated brass;
  • PAM ULTRA Link NG collars for pipes with diameters from 50 to 275 mm are used for connecting of smooth ends pipes of cold water supply systems including drinking water. Collars withstand pressure up to 16 bar, they are suitable for pipes made of cast iron, steel, PVC and asbestos cement.
Photo Name Article Price
Photo Draft
Photo Geberit Mapress Stainless Steel elbow tap connector 90° for gas metres, gas, d 22, L 6,5 [Code number: 91099] Draft Geberit Mapress Stainless Steel elbow tap connector 90° for gas metres, gas, d 22, L 6,5 [Code number: 91099]
Geberit Mapress Stainless Steel elbow tap connector 90° for gas metres, gas, d 22, L 6,5 [Code number: 91099]
Details 		91099

ATTENTION! This product is temporarily unavailable for order!

Application purpose:

  • For gas installations with natural gases (NG) and liquefied gases (LPG)
  • For connection single-pipe or two-pipe gas metre
  • For mounting plate gas metre connection

Characteristics:

  • Marked in yellow
  • Leaky if unpressed

Scope of delivery:

  • Seal ring HNBR yellow

Technical data

Material: Stainless Cr-Ni-Mo steel 1.4401 BS 316

Temperature range during operation: -20 - +70 °C

Angle: 90°

Download the installation instructions: Installation of Geberit Mapress Geberit Mapress system

d Rp L L1 l l1 Z
mm '' cm cm cm cm cm
22 1 6,5 5,8 3 2,2 3,7
Photo Draft
Photo Geberit Mapress Stainless Steel elbow tap connector 90° for gas metres, gas, d 28, L 6,5 [Code number: 91100 (G)] Draft Geberit Mapress Stainless Steel elbow tap connector 90° for gas metres, gas, d 28, L 6,5 [Code number: 91100 (G)]
Geberit Mapress Stainless Steel elbow tap connector 90° for gas metres, gas, d 28, L 6,5 [Code number: 91100 (G)]
Details 		91100 (G)

ATTENTION! This product is temporarily unavailable for order!

Application purpose:

  • For gas installations with natural gases (NG) and liquefied gases (LPG)
  • For connection single-pipe or two-pipe gas metre
  • For mounting plate gas metre connection

Characteristics:

  • Marked in yellow
  • Leaky if unpressed

Scope of delivery:

  • Seal ring HNBR yellow

Material: Stainless Cr-Ni-Mo steel 1.4401 BS 316

Temperature range during operation: -20 - +70 °C

Angle: 90°

Download the installation instructions: Installation of Geberit Mapress Geberit Mapress system

d Rp L L1 l l1 Z
mm '' cm cm cm cm cm
28 1 6,5 6,1 3 2,2 4
Photo
Photo Geberit Mapress seal ring FKM, white, d 15 [Code number: 91152 (G)]
Geberit Mapress seal ring FKM, white, d 15 [Code number: 91152 (G)]
Details 		91152 (G)

ATTENTION! This product is temporarily unavailable for order!

DN Material Operating temperature
mm    
15 FKM 5-155 °C
Photo
Photo Geberit Mapress seal ring FKM, white, d 18 [Code number: 91153]
Geberit Mapress seal ring FKM, white, d 18 [Code number: 91153]
Details 		91153

ATTENTION! This product is temporarily unavailable for order!

DN Material Operating temperature
mm    
18 FKM 5-155 °C
Photo
Photo Geberit Mapress seal ring FKM, white, d 22 [Code number: 91154]
Geberit Mapress seal ring FKM, white, d 22 [Code number: 91154]
Details 		91154

ATTENTION! This product is temporarily unavailable for order!

DN Material Operating temperature
mm    
22 FKM 5-155 °C
Photo
Photo Geberit Mapress seal ring FKM, white, d 28 [Code number: 91155]
Geberit Mapress seal ring FKM, white, d 28 [Code number: 91155]
Details 		91155

ATTENTION! This product is temporarily unavailable for order!

DN Material Operating temperature
mm    
28 FKM 5-155 °C
Photo
Photo Geberit Mapress seal ring FKM, white, d 35 [Code number: 91156]
Geberit Mapress seal ring FKM, white, d 35 [Code number: 91156]
Details 		91156

ATTENTION! This product is temporarily unavailable for order!

DN Material Operating temperature
mm    
35 FKM 5-155 °C
Photo
Photo Geberit Mapress seal ring FKM, white, d 42 [Code number: 91157]
Geberit Mapress seal ring FKM, white, d 42 [Code number: 91157]
Details 		91157

ATTENTION! This product is temporarily unavailable for order!

DN Material Operating temperature
mm    
42 FKM 5-155 °C
Photo
Photo Geberit Mapress seal ring FKM, white, d 54 [Code number: 91158]
Geberit Mapress seal ring FKM, white, d 54 [Code number: 91158]
Details 		91158

ATTENTION! This product is temporarily unavailable for order!

DN Material Operating temperature
mm    
54 FKM 5-155 °C
Photo
Photo Geberit Mapress Sealing ring, FKM, white, d 76.1mm [Code number: 91159]
Geberit Mapress Sealing ring, FKM, white, d 76.1mm [Code number: 91159]
Details 		91159

ATTENTION! This product is temporarily unavailable for order!
Photo
Photo Geberit Mapress Sealing ring, FKM, white, d 88.9mm [Code number: 91160]
Geberit Mapress Sealing ring, FKM, white, d 88.9mm [Code number: 91160]
Details 		91160

ATTENTION! This product is temporarily unavailable for order!
Photo
Photo Geberit Mapress Sealing ring, FKM, white, d 108mm [Code number: 91161]
Geberit Mapress Sealing ring, FKM, white, d 108mm [Code number: 91161]
Details 		91161

ATTENTION! This product is temporarily unavailable for order!
Photo Draft
Photo Geberit Mapress Ball valve with lever, with press sockets, stainless steel 1.4401, d 15 [Code number: 92100] Draft Geberit Mapress Ball valve with lever, with press sockets, stainless steel 1.4401, d 15 [Code number: 92100]
Geberit Mapress Ball valve with lever, with press sockets, stainless steel 1.4401, d 15 [Code number: 92100]
Details 		92100

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For heating water
  • For cooling water without antifreeze agent
  • For cooling water with antifreeze agent
  • For remote network heating water ≤ 120 °C
  • For service water
  • For treated water (application range according to Technical Information „Treated water“)
  • For grey and black water with pH value > 6.0
  • For extinguishing water (wet)
  • For compressed air (oil purity class 0–3)

Characteristics:

  • Spindle caulk made of PTFE
  • Section seal of flange and ball made of PTFE
  • Fulfils requirements in accordance with TA Air VDI 2440
  • Connecting flange for motor in accordance with EN ISO 5211 (only for d = 76.1–108 mm)
  • Length-adjustable actuator lever (only for d = 108 mm)
  • Pressing indicator
  • Leaky if unpressed
  • Seal ring made of CIIR, black
  • Pressing socket with transparent protection plug

Operating temperature: -20 - +120 °C

Material: CrNiMo steel 1.4401 (EN 10088)

Download the installation instructions: Installation of Geberit Mapress Geberit Mapress system

 

DN d k m L L1 L2 Z PN
mm mm mm mm cm cm cm cm bar
15 15 – – 12.2 5.5 10.5 4.1 40
Photo Draft
Photo Geberit Mapress Ball valve with lever, with press sockets, stainless steel 1.4401, d 18 [Code number: 92101] Draft Geberit Mapress Ball valve with lever, with press sockets, stainless steel 1.4401, d 18 [Code number: 92101]
Geberit Mapress Ball valve with lever, with press sockets, stainless steel 1.4401, d 18 [Code number: 92101]
Details 		92101

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For heating water
  • For cooling water without antifreeze agent
  • For cooling water with antifreeze agent
  • For remote network heating water ≤ 120 °C
  • For service water
  • For treated water (application range according to Technical Information „Treated water“)
  • For grey and black water with pH value > 6.0
  • For extinguishing water (wet)
  • For compressed air (oil purity class 0–3)

Characteristics:

  • Spindle caulk made of PTFE
  • Section seal of flange and ball made of PTFE
  • Fulfils requirements in accordance with TA Air VDI 2440
  • Connecting flange for motor in accordance with EN ISO 5211 (only for d = 76.1–108 mm)
  • Length-adjustable actuator lever (only for d = 108 mm)
  • Pressing indicator
  • Leaky if unpressed
  • Seal ring made of CIIR, black
  • Pressing socket with transparent protection plug

Operating temperature: -20 - +120 °C

Material: CrNiMo steel 1.4401 (EN 10088)

Download the installation instructions: Installation of Geberit Mapress Geberit Mapress system

DN d k m L L1 L2 Z PN
mm mm mm mm cm cm cm cm bar
15 18 – – 12.2 5.5 10.5 4.1 40
Photo Draft
Photo Geberit Mapress Ball valve with lever, with press sockets, stainless steel 1.4401, d 22 [Code number: 92102] Draft Geberit Mapress Ball valve with lever, with press sockets, stainless steel 1.4401, d 22 [Code number: 92102]
Geberit Mapress Ball valve with lever, with press sockets, stainless steel 1.4401, d 22 [Code number: 92102]
Details 		92102

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For heating water
  • For cooling water without antifreeze agent
  • For cooling water with antifreeze agent
  • For remote network heating water ≤ 120 °C
  • For service water
  • For treated water (application range according to Technical Information „Treated water“)
  • For grey and black water with pH value > 6.0
  • For extinguishing water (wet)
  • For compressed air (oil purity class 0–3)

Characteristics:

  • Spindle caulk made of PTFE
  • Section seal of flange and ball made of PTFE
  • Fulfils requirements in accordance with TA Air VDI 2440
  • Connecting flange for motor in accordance with EN ISO 5211 (only for d = 76.1–108 mm)
  • Length-adjustable actuator lever (only for d = 108 mm)
  • Pressing indicator
  • Leaky if unpressed
  • Seal ring made of CIIR, black
  • Pressing socket with transparent protection plug

Operating temperature: -20 - +120 °C

Material: CrNiMo steel 1.4401 (EN 10088)

Download the installation instructions: Installation of Geberit Mapress Geberit Mapress system

DN d k m L L1 L2 Z PN
mm mm mm mm cm cm cm cm bar
20 22 – – 13.3 6.1 10.5 4.6 40
Photo Draft
Photo Geberit Mapress Ball valve with lever, with press sockets, stainless steel 1.4401, d 28 [Code number: 92103] Draft Geberit Mapress Ball valve with lever, with press sockets, stainless steel 1.4401, d 28 [Code number: 92103]
Geberit Mapress Ball valve with lever, with press sockets, stainless steel 1.4401, d 28 [Code number: 92103]
Details 		92103

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For heating water
  • For cooling water without antifreeze agent
  • For cooling water with antifreeze agent
  • For remote network heating water ≤ 120 °C
  • For service water
  • For treated water (application range according to Technical Information „Treated water“)
  • For grey and black water with pH value > 6.0
  • For extinguishing water (wet)
  • For compressed air (oil purity class 0–3)

Characteristics:

  • Spindle caulk made of PTFE
  • Section seal of flange and ball made of PTFE
  • Fulfils requirements in accordance with TA Air VDI 2440
  • Connecting flange for motor in accordance with EN ISO 5211 (only for d = 76.1–108 mm)
  • Length-adjustable actuator lever (only for d = 108 mm)
  • Pressing indicator
  • Leaky if unpressed
  • Seal ring made of CIIR, black
  • Pressing socket with transparent protection plug

Operating temperature: -20 - +120 °C

Material: CrNiMo steel 1.4401 (EN 10088)

Download the installation instructions: Installation of Geberit Mapress Geberit Mapress system

DN d k m L L1 L2 Z PN
mm mm mm mm cm cm cm cm bar
25 28 – – 14.2 7.2 13 4.8 16
Photo Draft
Photo Geberit Mapress Ball valve with lever, with press sockets, stainless steel 1.4401, d 35 [Code number: 92104] Draft Geberit Mapress Ball valve with lever, with press sockets, stainless steel 1.4401, d 35 [Code number: 92104]
Geberit Mapress Ball valve with lever, with press sockets, stainless steel 1.4401, d 35 [Code number: 92104]
Details 		92104

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For heating water
  • For cooling water without antifreeze agent
  • For cooling water with antifreeze agent
  • For remote network heating water ≤ 120 °C
  • For service water
  • For treated water (application range according to Technical Information „Treated water“)
  • For grey and black water with pH value > 6.0
  • For extinguishing water (wet)
  • For compressed air (oil purity class 0–3)

Characteristics:

  • Spindle caulk made of PTFE
  • Section seal of flange and ball made of PTFE
  • Fulfils requirements in accordance with TA Air VDI 2440
  • Connecting flange for motor in accordance with EN ISO 5211 (only for d = 76.1–108 mm)
  • Length-adjustable actuator lever (only for d = 108 mm)
  • Pressing indicator
  • Leaky if unpressed
  • Seal ring made of CIIR, black
  • Pressing socket with transparent protection plug

Operating temperature: -20 - +120 °C

Material: CrNiMo steel 1.4401 (EN 10088)

Download the installation instructions: Installation of Geberit Mapress Geberit Mapress system

DN d k m L L1 L2 Z PN
mm mm mm mm cm cm cm cm bar
32 35 – – 17 8 13 5.9 16
Photo Draft
Photo Geberit Mapress Ball valve with lever, with press sockets, stainless steel 1.4401, d 42 [Code number: 92105] Draft Geberit Mapress Ball valve with lever, with press sockets, stainless steel 1.4401, d 42 [Code number: 92105]
Geberit Mapress Ball valve with lever, with press sockets, stainless steel 1.4401, d 42 [Code number: 92105]
Details 		92105

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For heating water
  • For cooling water without antifreeze agent
  • For cooling water with antifreeze agent
  • For remote network heating water ≤ 120 °C
  • For service water
  • For treated water (application range according to Technical Information „Treated water“)
  • For grey and black water with pH value > 6.0
  • For extinguishing water (wet)
  • For compressed air (oil purity class 0–3)

Characteristics:

  • Spindle caulk made of PTFE
  • Section seal of flange and ball made of PTFE
  • Fulfils requirements in accordance with TA Air VDI 2440
  • Connecting flange for motor in accordance with EN ISO 5211 (only for d = 76.1–108 mm)
  • Length-adjustable actuator lever (only for d = 108 mm)
  • Pressing indicator
  • Leaky if unpressed
  • Seal ring made of CIIR, black
  • Pressing socket with transparent protection plug

Operating temperature: -20 - +120 °C

Material: CrNiMo steel 1.4401 (EN 10088)

Download the installation instructions: Installation of Geberit Mapress Geberit Mapress system

DN d k m L L1 L2 Z PN
mm mm mm mm cm cm cm cm bar
40 42 – – 19.4 9.1 16 6.7 16
Photo Draft
Photo Geberit Mapress Ball valve with lever, with press sockets, stainless steel 1.4401, d 54 [Code number: 92106] Draft Geberit Mapress Ball valve with lever, with press sockets, stainless steel 1.4401, d 54 [Code number: 92106]
Geberit Mapress Ball valve with lever, with press sockets, stainless steel 1.4401, d 54 [Code number: 92106]
Details 		92106

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For heating water
  • For cooling water without antifreeze agent
  • For cooling water with antifreeze agent
  • For remote network heating water ≤ 120 °C
  • For service water
  • For treated water (application range according to Technical Information „Treated water“)
  • For grey and black water with pH value > 6.0
  • For extinguishing water (wet)
  • For compressed air (oil purity class 0–3)

Characteristics:

  • Spindle caulk made of PTFE
  • Section seal of flange and ball made of PTFE
  • Fulfils requirements in accordance with TA Air VDI 2440
  • Connecting flange for motor in accordance with EN ISO 5211 (only for d = 76.1–108 mm)
  • Length-adjustable actuator lever (only for d = 108 mm)
  • Pressing indicator
  • Leaky if unpressed
  • Seal ring made of CIIR, black
  • Pressing socket with transparent protection plug

Operating temperature: -20 - +120 °C

Material: CrNiMo steel 1.4401 (EN 10088)

Download the installation instructions: Installation of Geberit Mapress Geberit Mapress system

DN d k m L L1 L2 Z PN
mm mm mm mm cm cm cm cm bar
50 54 – – 22.1 10.2 16 7.5 16
Photo Draft
Photo Geberit Mapress Ball valve with lever, with press sockets, stainless steel 1.4401, d 76,1 [Code number: 92107] Draft Geberit Mapress Ball valve with lever, with press sockets, stainless steel 1.4401, d 76,1 [Code number: 92107]
Geberit Mapress Ball valve with lever, with press sockets, stainless steel 1.4401, d 76,1 [Code number: 92107]
Details 		92107

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

  • For heating water
  • For cooling water without antifreeze agent
  • For cooling water with antifreeze agent
  • For remote network heating water ≤ 120 °C
  • For service water
  • For treated water (application range according to Technical Information „Treated water“)
  • For grey and black water with pH value > 6.0
  • For extinguishing water (wet)
  • For compressed air (oil purity class 0–3)

Characteristics:

  • Spindle caulk made of PTFE
  • Section seal of flange and ball made of PTFE
  • Fulfils requirements in accordance with TA Air VDI 2440
  • Connecting flange for motor in accordance with EN ISO 5211 (only for d = 76.1–108 mm)
  • Length-adjustable actuator lever (only for d = 108 mm)
  • Pressing indicator
  • Leaky if unpressed
  • Seal ring made of CIIR, black
  • Pressing socket with transparent protection plug

Operating temperature: -20 - +120 °C

Material: CrNiMo steel 1.4401 (EN 10088)

Download the installation instructions: Installation of Geberit Mapress Geberit Mapress system

DN d k m L L1 L2 Z PN
mm mm mm mm cm cm cm cm bar
65 76.1 70 9 29.1 14 22.5 9.3 16

© Inrusstrade.ru 1999-2024. "Inrusstrade" Ltd. Copying and quoting is prohibited