Fittings for water supply

Watch products by Brands

The pipeline for water supply systems must have certain characteristics. For example, pipes and fittings for water supply systems must be safe for people and they must have high corrosion resistance which will adversely affect the quality of the supplied water.

The group of products includes fittings for water supply systems, including drinking water, of the highest quality:

Fittings Wavin Future K1 - this system is mounted by pressing, is made of mineral-reinforced polypropylene;
Geberit Mapress fittings can be made of several types of steel, in particular stainless steel and carbon steel. All fittings of this pipeline system are resistant to corrosion and strength. Depending on the type, Geberit Mapress fittings for water systems withstand pressure up to 16 bar;
REHAU RAUTITAN fittings are made of brass, stainless steel and polymeric material PPSU (polyphenylsulfone), they can be threadless and threaded. They are connect to pipes and other fittings using special compression sleeves which provide a completely sealed connection;
Geberit Mepla fittings - this multilayer piping system has been tested according to EN ISO 21003 and meets all modern standards. Fittings are equipped with marking of the insert depth - it allows to control the installation and speeds up it. They are made of brass, red brass and PVDF;
Wavin Ecoplastik fittings are made of mineral-reinforced polypropylene, while they can be completely plastic and have threads and other elements made of nickel-plated brass;
PAM ULTRA Link NG collars for pipes with diameters from 50 to 275 mm are used for connecting of smooth ends pipes of cold water supply systems including drinking water. Collars withstand pressure up to 16 bar, they are suitable for pipes made of cast iron, steel, PVC and asbestos cement.

Photo Name Article Price

Geberit Mapress Stainless Steel elbow tap connector 90° for gas metres, gas, d 22, L 6,5 [Code number: 91099]

Details

91099

ATTENTION! This product is temporarily unavailable for order!

Application purpose:

For gas installations with natural gases (NG) and liquefied gases (LPG)
For connection single-pipe or two-pipe gas metre
For mounting plate gas metre connection

Characteristics:

Marked in yellow
Leaky if unpressed

Scope of delivery:

Seal ring HNBR yellow

Technical data

Material: Stainless Cr-Ni-Mo steel 1.4401 BS 316

Temperature range during operation: -20 - +70 °C

Angle: 90°

Download the installation instructions: Geberit Mapress system

d	Rp	L	L1	l	l1	Z
mm	''	cm	cm	cm	cm	cm
22	1	6,5	5,8	3	2,2	3,7

Geberit Mapress Stainless Steel elbow tap connector 90° for gas metres, gas, d 28, L 6,5 [Code number: 91100 (G)]

Details

91100 (G)

ATTENTION! This product is temporarily unavailable for order!

Application purpose:

For gas installations with natural gases (NG) and liquefied gases (LPG)
For connection single-pipe or two-pipe gas metre
For mounting plate gas metre connection

Characteristics:

Marked in yellow
Leaky if unpressed

Scope of delivery:

Seal ring HNBR yellow

Material: Stainless Cr-Ni-Mo steel 1.4401 BS 316

Temperature range during operation: -20 - +70 °C

Angle: 90°

Download the installation instructions: Geberit Mapress system

d	Rp	L	L1	l	l1	Z
mm	''	cm	cm	cm	cm	cm
28	1	6,5	6,1	3	2,2	4

Geberit Mapress seal ring FKM, white, d 15 [Code number: 91152 (G)]

Details

91152 (G)

ATTENTION! This product is temporarily unavailable for order!

DN	Material	Operating temperature
mm
15	FKM	5-155 °C

Geberit Mapress seal ring FKM, white, d 18 [Code number: 91153]

Details

91153

ATTENTION! This product is temporarily unavailable for order!

DN	Material	Operating temperature
mm
18	FKM	5-155 °C

Geberit Mapress seal ring FKM, white, d 22 [Code number: 91154]

Details

91154

ATTENTION! This product is temporarily unavailable for order!

DN	Material	Operating temperature
mm
22	FKM	5-155 °C

Geberit Mapress seal ring FKM, white, d 28 [Code number: 91155]

Details

91155

ATTENTION! This product is temporarily unavailable for order!

DN	Material	Operating temperature
mm
28	FKM	5-155 °C

Geberit Mapress seal ring FKM, white, d 35 [Code number: 91156]

Details

91156

ATTENTION! This product is temporarily unavailable for order!

DN	Material	Operating temperature
mm
35	FKM	5-155 °C

Geberit Mapress seal ring FKM, white, d 42 [Code number: 91157]

Details

91157

ATTENTION! This product is temporarily unavailable for order!

DN	Material	Operating temperature
mm
42	FKM	5-155 °C

Geberit Mapress seal ring FKM, white, d 54 [Code number: 91158]

Details

91158

ATTENTION! This product is temporarily unavailable for order!

DN	Material	Operating temperature
mm
54	FKM	5-155 °C

Geberit Mapress Sealing ring, FKM, white, d 76.1mm [Code number: 91159]

Details

91159

ATTENTION! This product is temporarily unavailable for order!

Geberit Mapress Sealing ring, FKM, white, d 88.9mm [Code number: 91160]

Details

91160

ATTENTION! This product is temporarily unavailable for order!

Geberit Mapress Sealing ring, FKM, white, d 108mm [Code number: 91161]

Details

91161

ATTENTION! This product is temporarily unavailable for order!

Geberit Mapress Ball valve with lever, with press sockets, stainless steel 1.4401, d 15 [Code number: 92100]

Details

92100

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

For heating water
For cooling water without antifreeze agent
For cooling water with antifreeze agent
For remote network heating water ≤ 120 °C
For service water
For treated water (application range according to Technical Information „Treated water“)
For grey and black water with pH value > 6.0
For extinguishing water (wet)
For compressed air (oil purity class 0–3)

Characteristics:

Spindle caulk made of PTFE
Section seal of flange and ball made of PTFE
Fulfils requirements in accordance with TA Air VDI 2440
Connecting flange for motor in accordance with EN ISO 5211 (only for d = 76.1–108 mm)
Length-adjustable actuator lever (only for d = 108 mm)
Pressing indicator
Leaky if unpressed
Seal ring made of CIIR, black
Pressing socket with transparent protection plug

Operating temperature: -20 - +120 °C

Material: CrNiMo steel 1.4401 (EN 10088)

Download the installation instructions: Geberit Mapress system

DN	d	k	m	L	L1	L2	Z	PN
mm	mm	mm	mm	cm	cm	cm	cm	bar
15	15	–	–	12.2	5.5	10.5	4.1	40

Geberit Mapress Ball valve with lever, with press sockets, stainless steel 1.4401, d 18 [Code number: 92101]

Details

92101

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

For heating water
For cooling water without antifreeze agent
For cooling water with antifreeze agent
For remote network heating water ≤ 120 °C
For service water
For treated water (application range according to Technical Information „Treated water“)
For grey and black water with pH value > 6.0
For extinguishing water (wet)
For compressed air (oil purity class 0–3)

Characteristics:

Spindle caulk made of PTFE
Section seal of flange and ball made of PTFE
Fulfils requirements in accordance with TA Air VDI 2440
Connecting flange for motor in accordance with EN ISO 5211 (only for d = 76.1–108 mm)
Length-adjustable actuator lever (only for d = 108 mm)
Pressing indicator
Leaky if unpressed
Seal ring made of CIIR, black
Pressing socket with transparent protection plug

Operating temperature: -20 - +120 °C

Material: CrNiMo steel 1.4401 (EN 10088)

Download the installation instructions: Geberit Mapress system

DN	d	k	m	L	L1	L2	Z	PN
mm	mm	mm	mm	cm	cm	cm	cm	bar
15	18	–	–	12.2	5.5	10.5	4.1	40

Geberit Mapress Ball valve with lever, with press sockets, stainless steel 1.4401, d 22 [Code number: 92102]

Details

92102

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

For heating water
For cooling water without antifreeze agent
For cooling water with antifreeze agent
For remote network heating water ≤ 120 °C
For service water
For treated water (application range according to Technical Information „Treated water“)
For grey and black water with pH value > 6.0
For extinguishing water (wet)
For compressed air (oil purity class 0–3)

Characteristics:

Spindle caulk made of PTFE
Section seal of flange and ball made of PTFE
Fulfils requirements in accordance with TA Air VDI 2440
Connecting flange for motor in accordance with EN ISO 5211 (only for d = 76.1–108 mm)
Length-adjustable actuator lever (only for d = 108 mm)
Pressing indicator
Leaky if unpressed
Seal ring made of CIIR, black
Pressing socket with transparent protection plug

Operating temperature: -20 - +120 °C

Material: CrNiMo steel 1.4401 (EN 10088)

Download the installation instructions: Geberit Mapress system

DN	d	k	m	L	L1	L2	Z	PN
mm	mm	mm	mm	cm	cm	cm	cm	bar
20	22	–	–	13.3	6.1	10.5	4.6	40

Geberit Mapress Ball valve with lever, with press sockets, stainless steel 1.4401, d 28 [Code number: 92103]

Details

92103

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

For heating water
For cooling water without antifreeze agent
For cooling water with antifreeze agent
For remote network heating water ≤ 120 °C
For service water
For treated water (application range according to Technical Information „Treated water“)
For grey and black water with pH value > 6.0
For extinguishing water (wet)
For compressed air (oil purity class 0–3)

Characteristics:

Spindle caulk made of PTFE
Section seal of flange and ball made of PTFE
Fulfils requirements in accordance with TA Air VDI 2440
Connecting flange for motor in accordance with EN ISO 5211 (only for d = 76.1–108 mm)
Length-adjustable actuator lever (only for d = 108 mm)
Pressing indicator
Leaky if unpressed
Seal ring made of CIIR, black
Pressing socket with transparent protection plug

Operating temperature: -20 - +120 °C

Material: CrNiMo steel 1.4401 (EN 10088)

Download the installation instructions: Geberit Mapress system

DN	d	k	m	L	L1	L2	Z	PN
mm	mm	mm	mm	cm	cm	cm	cm	bar
25	28	–	–	14.2	7.2	13	4.8	16

Geberit Mapress Ball valve with lever, with press sockets, stainless steel 1.4401, d 35 [Code number: 92104]

Details

92104

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

For heating water
For cooling water without antifreeze agent
For cooling water with antifreeze agent
For remote network heating water ≤ 120 °C
For service water
For treated water (application range according to Technical Information „Treated water“)
For grey and black water with pH value > 6.0
For extinguishing water (wet)
For compressed air (oil purity class 0–3)

Characteristics:

Spindle caulk made of PTFE
Section seal of flange and ball made of PTFE
Fulfils requirements in accordance with TA Air VDI 2440
Connecting flange for motor in accordance with EN ISO 5211 (only for d = 76.1–108 mm)
Length-adjustable actuator lever (only for d = 108 mm)
Pressing indicator
Leaky if unpressed
Seal ring made of CIIR, black
Pressing socket with transparent protection plug

Operating temperature: -20 - +120 °C

Material: CrNiMo steel 1.4401 (EN 10088)

Download the installation instructions: Geberit Mapress system

DN	d	k	m	L	L1	L2	Z	PN
mm	mm	mm	mm	cm	cm	cm	cm	bar
32	35	–	–	17	8	13	5.9	16

Geberit Mapress Ball valve with lever, with press sockets, stainless steel 1.4401, d 42 [Code number: 92105]

Details

92105

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

For heating water
For cooling water without antifreeze agent
For cooling water with antifreeze agent
For remote network heating water ≤ 120 °C
For service water
For treated water (application range according to Technical Information „Treated water“)
For grey and black water with pH value > 6.0
For extinguishing water (wet)
For compressed air (oil purity class 0–3)

Characteristics:

Spindle caulk made of PTFE
Section seal of flange and ball made of PTFE
Fulfils requirements in accordance with TA Air VDI 2440
Connecting flange for motor in accordance with EN ISO 5211 (only for d = 76.1–108 mm)
Length-adjustable actuator lever (only for d = 108 mm)
Pressing indicator
Leaky if unpressed
Seal ring made of CIIR, black
Pressing socket with transparent protection plug

Operating temperature: -20 - +120 °C

Material: CrNiMo steel 1.4401 (EN 10088)

Download the installation instructions: Geberit Mapress system

DN	d	k	m	L	L1	L2	Z	PN
mm	mm	mm	mm	cm	cm	cm	cm	bar
40	42	–	–	19.4	9.1	16	6.7	16

Geberit Mapress Ball valve with lever, with press sockets, stainless steel 1.4401, d 54 [Code number: 92106]

Details

92106

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

For heating water
For cooling water without antifreeze agent
For cooling water with antifreeze agent
For remote network heating water ≤ 120 °C
For service water
For treated water (application range according to Technical Information „Treated water“)
For grey and black water with pH value > 6.0
For extinguishing water (wet)
For compressed air (oil purity class 0–3)

Characteristics:

Spindle caulk made of PTFE
Section seal of flange and ball made of PTFE
Fulfils requirements in accordance with TA Air VDI 2440
Connecting flange for motor in accordance with EN ISO 5211 (only for d = 76.1–108 mm)
Length-adjustable actuator lever (only for d = 108 mm)
Pressing indicator
Leaky if unpressed
Seal ring made of CIIR, black
Pressing socket with transparent protection plug

Operating temperature: -20 - +120 °C

Material: CrNiMo steel 1.4401 (EN 10088)

Download the installation instructions: Geberit Mapress system

DN	d	k	m	L	L1	L2	Z	PN
mm	mm	mm	mm	cm	cm	cm	cm	bar
50	54	–	–	22.1	10.2	16	7.5	16

Geberit Mapress Ball valve with lever, with press sockets, stainless steel 1.4401, d 76,1 [Code number: 92107]

Details

92107

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

For heating water
For cooling water without antifreeze agent
For cooling water with antifreeze agent
For remote network heating water ≤ 120 °C
For service water
For treated water (application range according to Technical Information „Treated water“)
For grey and black water with pH value > 6.0
For extinguishing water (wet)
For compressed air (oil purity class 0–3)

Characteristics:

Spindle caulk made of PTFE
Section seal of flange and ball made of PTFE
Fulfils requirements in accordance with TA Air VDI 2440
Connecting flange for motor in accordance with EN ISO 5211 (only for d = 76.1–108 mm)
Length-adjustable actuator lever (only for d = 108 mm)
Pressing indicator
Leaky if unpressed
Seal ring made of CIIR, black
Pressing socket with transparent protection plug

Operating temperature: -20 - +120 °C

Material: CrNiMo steel 1.4401 (EN 10088)

Download the installation instructions: Geberit Mapress system

DN	d	k	m	L	L1	L2	Z	PN
mm	mm	mm	mm	cm	cm	cm	cm	bar
65	76.1	70	9	29.1	14	22.5	9.3	16