Fittings for storm-water drainage system include:
T-pieces, bends and other fittings, which are used when the installation of storm-water drainage system, are manufactured by the Wavin Company. They are made of high-density polyethylene - this material is durable, while it has high resistance to ultraviolet radiation.
The fittingsfor storm-water drainage system include access pipes - they are used for inspections of rainwater system and clean it if necessary.
Rain hoppers are used to drain rainwater into the sewage system. The group of products presents the HL rain hoppers which are made of polypropylene and cast iron. Polypropylene, from which HL rain hoppers are made, is highly resistant to ultraviolet radiation. Some models are equipped with visible parts of cast iron, which increases the load that rain hoppers can withstand.
HL rain hoppers can be installed in cold regions of Russia, as they can withstand temperatures as low as -50 °C. The capacity of the HL rain hoppers can reach 6.67 l/s.
Photo | Name | Article | Price | |||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
SINIKON Rain Flow Expansion socket, PP, d - 110 [Code number: 531011.F]
Details
|
531011.F | 327 rub | ||||||||||||||||||||||||||||||||||||||||
Application purposes:
Material: propylene homopolymer (type 1) PP-H Working temperature: +20 °С Working pressure: 1 bar Rigid fastening is required to prevent longitudinal and transverse movements.
Download installation recommendations: SINIKON Rain Flow |
||||||||||||||||||||||||||||||||||||||||||
(REMOVED FROM PRODUCTION. REPLACEMENT: КФ.ПНД.075.110] SINIKON Rain Flow Wrench for fittings, HDPE, d - 75*110 [Code number: 60.CAS.75.L00]
Details
|
60.CAS.75.L00 | |||||||||||||||||||||||||||||||||||||||||
Application purposes:
Material: HDPE Size: for fittings 75-110 mm |
||||||||||||||||||||||||||||||||||||||||||
(REMOVED FROM PRODUCTION) - SINIKON Rain Flow TRIPLUS Double branch fitting, PP, d - 110*110*110 [Code number: 650655]
Details
|
650655 | |||||||||||||||||||||||||||||||||||||||||
Application purposes:
Material: propylene homopolymer (type 1) PP-H Working temperature: +20 °С Rigid fastening is required to prevent longitudinal and transverse movements.
Download installation recommendations: SINIKON Rain Flow |
||||||||||||||||||||||||||||||||||||||||||
(REMOVED FROM PRODUCTION. REPLACEMENT: 4099 (S)) - SINIKON Rain Flow Compression bend 90°, PE, d - 110 [Code number: GR.513.11.000]
Details
|
GR.513.11.000 | |||||||||||||||||||||||||||||||||||||||||
Application purposes:
Working temperature: +20 °С
|
||||||||||||||||||||||||||||||||||||||||||
(REMOVED FROM PRODUCTION) - SINIKON Rain Flow Compression T-piece, PE, d - 110 [Code number: GR.514.11.000]
Details
|
GR.514.11.000 | |||||||||||||||||||||||||||||||||||||||||
Application purposes:
Working temperature: +20 °С
|
||||||||||||||||||||||||||||||||||||||||||
SINIKON Rain Flow Compression access pipe, PE, d - 110 [Code number: GR.514.110.FR]
Details
|
GR.514.110.FR | 8 049 rub | ||||||||||||||||||||||||||||||||||||||||
Application purposes:
Working temperature: +20 °С Rigid fastening is required to prevent longitudinal and transverse movements.
Download installation recommendations: SINIKON Rain Flow |
||||||||||||||||||||||||||||||||||||||||||
Hutterer & Lechner Rain hopper with ball joint, DN110/125 [Code number: HL 600N]
Details
|
HL 600N | 14 748 rub | ||||||||||||||||||||||||||||||||||||||||
Rain hopper for receiving water from outdoor storm drains DN110 / 125 with a swivel joint, with a frost-resistant odor-locking device, a leaf catcher, with a cleaning flap, and an adapter for connection to a drainpipe.
Material of spare parts
Packaging data (carton)
|
||||||||||||||||||||||||||||||||||||||||||
Hutterer & Lechner Rain water hopper with ball-joint, leaf catcher, frost-proof flap valve, inspection cover, visible parts made of cast iron, DN110/125 [Code number: HL 600NG]
Details
|
HL 600NG | 25 986 rub | ||||||||||||||||||||||||||||||||||||||||
Rain water hopper HL 600NG is equipped with visible parts made of cast iron. There is ball-joint outlet, leaf strainer and flap. Also, the rain water hopper is equipped with a special hatch for cleaning.
Material of spare parts
Packaging data (carton)
Download the installation instructions of product: Rain water hopper HL 600NG |
||||||||||||||||||||||||||||||||||||||||||
Hutterer & Lechner Rain hopper with horizontal inlet, visible parts made of cast iron, DN110/125 [Code number: HL 600NGHO]
Details
|
HL 600NGHO | 25 231 rub | ||||||||||||||||||||||||||||||||||||||||
Material of spare parts
Packaging data (carton)
Download data sheet: Rain hopper HL 600NGHO |
||||||||||||||||||||||||||||||||||||||||||
Hutterer & Lechner Rain hopper with horizontal inlet, DN110/125 [Code number: HL 600NHO]
Details
|
HL 600NHO | 19 808 rub | ||||||||||||||||||||||||||||||||||||||||
Rain hopper DN110/125 with horizontal inlet.
Material of spare parts
Packaging data (carton)
Download product installation: Rain hopper HL 600NHO |
||||||||||||||||||||||||||||||||||||||||||
Hutterer & Lechner Individual topping for HL600N/HL600NHO to fill in gravel or floor paving [Code number: HL 601i]
Details
|
HL 601i | 3 811 rub | ||||||||||||||||||||||||||||||||||||||||
Characteristics of HL sewage equipment:
|
||||||||||||||||||||||||||||||||||||||||||
Hutterer & Lechner Rain hopper, DN110 [Code number: HL 660/1]
Details
|
HL 660/1 | 4 890 rub | ||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||||
Hutterer & Lechner Rain hopper with leaf strainer, adapter rings d 75-110mm and frost-proof flap seal, DN110/125 [Code number: HL 660/2]
Details
|
HL 660/2 | 5 124 rub | ||||||||||||||||||||||||||||||||||||||||
Rain hopper HL 660/2 has vertical outlet DN110/125. The body of rain hopper is made of polypropylene. Weight is 800 gr. Capacity is 6,6 l/s. The rain hopper is equipped with leaf strainer, adapter rings d 75 - 110 mm and frost- and drought-proof flap seal.
Material of spare parts
Packaging data (carton)
Download data sheet: Rain hopper HL 660/2 |
||||||||||||||||||||||||||||||||||||||||||
Hutterer & Lechner Rain hopper with leaf strainer, adapter rings d 80mm and frost-proof flap seal, DN110/125 [Code number: HL 660/2-80]
Details
|
HL 660/2-80 | 5 124 rub | ||||||||||||||||||||||||||||||||||||||||
Rain hopper HL 660/2-80 has vertical outlet DN110/125. The body of rain hopper is made of polypropylene. Weight is 800 gr. Capacity is 6,6 l/s. The rain hopper is equipped with leaf strainer, adapter ring d 80 mm and frost- and drought-proof flap seal.
Material of spare parts
Packaging data (carton)
Download data sheet: Rain hopper HL 660/2-80 |
||||||||||||||||||||||||||||||||||||||||||
Hutterer & Lechner Rain hopper with leaf strainer, adapter rings d 75-110mm and frost-proof flap seal, DN110/125 [Code number: HL 660E]
Details
|
HL 660E | 3 467 rub | ||||||||||||||||||||||||||||||||||||||||
Rain hopper HL 660E has vertical outlet DN110/125. The body of rain hopper is made of polypropylene. Weight is 800 gr. Capacity is 6,6 l/s. The rain hopper is equipped with leaf strainer, adapter rings (for cutting out) d 75-110mm and frost-proof flap seal. The rain hopper is operated at temperatures ranging from -50 to +100 °C, it will serve for at least 50 years.
Material of spare parts
Packaging data (carton)
Download data sheet: Rain hopper HL 660E |
||||||||||||||||||||||||||||||||||||||||||
SINIKON Rain Flow Compression T-piece, PE, PN16, d - 110 [Code number: MDT009P.S]
Details
|
MDT009P.S | 3 618 rub | ||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||||
SINIKON Rain Flow Flanged stub, PP, S 3,4, L 600, d - 110 [Code number: S1100600.F.3.4]
Details
|
S1100600.F.3.4 | 7 374 rub | ||||||||||||||||||||||||||||||||||||||||
Application purposes:
Material: propylene homopolymer (type 1) PP-H Working temperature: +20 °С
|
||||||||||||||||||||||||||||||||||||||||||
SINIKON Rain Flow Flanged stub, PP, S 5,3, L 600, d - 110 [Code number: S1100600.F.5.3]
Details
|
S1100600.F.5.3 | 7 676 rub | ||||||||||||||||||||||||||||||||||||||||
Application purposes:
Material: propylene homopolymer (type 1) PP-H Working temperature: +20 °С
|
||||||||||||||||||||||||||||||||||||||||||
SINIKON Rain Flow Wrench for PE fittings, d - 75-110 [Code number: КФ.ПНД.075.110]
Details
|
КФ.ПНД.075.110 | 4 282 rub | ||||||||||||||||||||||||||||||||||||||||
Application purposes:
Material: PE Diameter range: from 75 to 110 mm The main advantages of the system SINIKON Rain Flow Application purposes:
|
||||||||||||||||||||||||||||||||||||||||||
[PART NUMBER REPLACED BY MDT009P.S) - SINIKON Rain Flow Compression T-piece, PE, PN16, d - 110 (Poelsan) [Code number: 10002599]
Details
|
10002599 | 4 565 rub | ||||||||||||||||||||||||||||||||||||||||
Application purposes:
Characteristics:
Download installation recommendations: SINIKON Rain Flow |