Fittings for heating systems

Rehau RAUTITAN radiator bend can be used for connecting the radiator and RAUTITAN stabil and RAUTITAN flex pipes. It can be used in single and two pipe systems. L-shaped radiator bend can be used in radiator systems and in underfloor heating, tubes can be with different diameters. Two the radiator bends are used when connecting a radiator. The radiator bends are made of stainless steel 15x1.0 mm in accordance with DIN EN 10088 and the connection fittings are made of stainless steel in accordance with DIN EN 10088. The radiator bends can be used with plastic pipes DN20.

You can see an example of installing heating system to radiator using the radiator bend.

Download the installation instructions of product: RAUTITAN radiator bend

Rehau RAUTITAN radiator bend can be used for connecting the radiator and RAUTITAN stabil and RAUTITAN flex pipes. It can be used in single and two pipe systems. L-shaped radiator bend can be used in radiator systems and in underfloor heating, tubes can be with different diameters. Two the radiator bends are used when connecting a radiator. The radiator bends are made of stainless steel 15x1.0 mm in accordance with DIN EN 10088 and the connection fittings are made of stainless steel in accordance with DIN EN 10088. The radiator bends can be used with plastic pipes DN20.

You can see an example of installing heating system to radiator using the radiator bend.

Download the installation instructions of product: RAUTITAN radiator bend

Rehau RAUTITAN T-tubes is used to connect RAUTITAN stabil and RAUTITAN flex pipes DN16 to the radiator. It is used in single and two-pipe systems and it can be used for radiator systems and in underfloor heating. Tubes can be with different diameters. The T-tubes are made of stainless steel 15 x 1,0 mm in accordance with DIN EN 10088.

You can see an example of mounting the radiator bend to the heating device in the photo.

Download the installation instructions of product: RAUTITAN radiator bend

REHAU T-shaped tube is used when installation of heating systems - tubes are connected RAUTITAN stabil and RAUTITAN flex pipes to a radiator. The tubes are used in the one- and two-pipe systems. They can be used for radiator systems and in underfloor heating, tubes can be with different diameters. They are made of stainless steel.

For connection of radiator to heating system you should used the 2 T-shaped tubes.

You can see an example of mounting the radiator bend to the heating device in the photo.

Download the installation instructions of product: RAUTITAN radiator bend

T-shaped stainless steel REHAU tubes are used for connecting pipes to the radiators of heating system. They are suitable for RAUTITAN stabil and RAUTITAN flex pipe DN20. For connection of radiator to heating system you should used the 2 T-shaped tubes.

They can be used in single and two-pipe systems, tubes can be with different diameters. The T-shaped tubes are suitable for radiator systems and in underfloor heating.

You can see an example of mounting the radiator bend to the heating device in the photo.

Download the installation instructions of product: RAUTITAN radiator bend

Rehau RAUTITAN T-shaped tubes of stainless steel are used in heating systems and they are designed for connection pipes to the radiator. Rehau RAUTITAN tubes are suitable for single and two-pipe systems, for radiator systems and in underfloor heating. The tubes can be with different diameters. For connection of radiator to heating system you should used the 2 T-shaped tubes.

Use with the pipes: RAUTITAN stabil and RAUTITAN flex.

You can see an example of mounting the radiator bend to the heating device in the photo.

Download the installation instructions of product: RAUTITAN radiator bend

Rehau RAUTITAN pipe crosses are applies when installing heating systems. The pipe crosses are used when you want to connect additional heating devices to the main pipeline while maintaining a predetermined height of the floor construction.

The kit includes:

• Isolation.
• Heat-insulating housing which consists of two parts - upper and lower. The parts of heat-insulating housing has thickness of 13 mm.

Material fitting: brass according to DIN EN 1982.

Surface: brass.

Thermal conductivity: 0.040 W/m*K.

Casing material: polystyrene.

Rehau RAUTITAN pipe cross is used when installing heating systems. The Rehau RAUTITAN pipe cross allows to connect additional heaters to the pipeline while maintaining the desired height of the floor construction.

Comes with heat-insulating housing and isolation. The heat-insulating housing consists of two parts, the thickness of each of them is 13 mm.

The pipe cross is made of brass according to DIN EN 1982. The casing is made of polystyrene, it is white.

Thermal conductivity: 0.040 W/m*K.

Rehau RAUTITAN pipe cross is used for connection additional heaters to the pipeline, with the use of the pipe cross you can retains the desired height of the floor construction. It is used in Rehau RAUTITAN heating systems.

Comes with  isolation and heat-insulating housing which is made of polystyrene. White heat-insulating housing consists of two parts (upper and lower), the thickness of each component of the heat-insulating housing is 13 mm.

The pipe cross is made of brass according to DIN EN 1982.

Thermal conductivity: 0.040 W/m*K.

Attention! The article is discontinued!

Rehau RAUTITAN union connectors are used for connection RAUTITAN flex pipes to ball valve set and distribution manifold or fixture with Eurocone G 3/4".

It is used with pipes DN16.

The kit includes:

• Thrust bush;
• Clamping ring;
• Union nut.

Material: brass which complies with DIN EN 12164, DIN EN 12165, DIN EN 12168

The surface of the union nut is nickel-plated.

SW - wrench size

Rehau RAUTITAN compression nut for Pink / His / Flex pipes is used for connection the heating pipe to block ball valve, distribution manifold or shut-off valves with threaded connection 3/4".

Scope of delivery:

• Union nut;
• Clamping ring;
• Thrust bush.

Material: brass according to DIN EN 12164, DIN EN 12165, DIN EN 12168.

The surface of the union nut is nickel plated.

Application:

• For installation of heating systems

Material: according to DIN EN 12164, DIN EN 12165, DIN EN 12168.

Surface: nickel-plated (only connecting nut).

Sizes: 16 х 3/4"UNI.

Weight: 0,064 kg.

Attention! The article is discontinued!

Rehau RAUTITAN union connectors are used for connection RAUTITAN flex / pink pipes to ball valve set and distribution manifold or fixture with Eurocone G ¾".

It is used with pipes DN20.

The kit includes:

• Thrust bush;
• Clamping ring;
• Union nut.

Material: brass which complies with DIN EN 12164, DIN EN 12165, DIN EN 12168

The surface of the union nut is nickel-plated.

SW - wrench size

Application:

• For installation of heating systems

Material: according to DIN EN 12164, DIN EN 12165, DIN EN 12168.

Surface: nickel-plated (only connecting nut).

Sizes: 20 x 3/4"UNI.

Weight: 0.055 kg.

Rehau RAUTITAN L-connection pipe set is used for connecting RAUTITAN stabil and RAUTITAN flex pipes to the radiator. It can be mounted in one- and two-pipe systems. Only for underfloor heating. It is suitable for pipes DN16.

The set includes:

• Pair of L-shaped tubes;
• Fixing fitting fot mounting the pipe on the floor;
• Dowel (10 mm).

The tubes are made of stainless steel. Fixing fitting is made of galvanized steel.

Center Distance: 50 mm.

You can see an example of mounting the L-connection pipe set to the heating device in the photo.

Download the installation instructions of product: RAUTITAN radiator bend

Rehau RAUTITAN L-connection pipe set is used for connecting RAUTITAN stabil and RAUTITAN flex pipes to the radiator. It can be mounted in one- and two-pipe systems. Only for underfloor heating. It is suitable for pipes DN16.

The set includes:

• Pair of L-shaped tubes;
• Fixing fitting fot mounting the pipe on the floor;
• Screw;
• Washer;
• Dowel (10 mm).

It is made of stainless steel.

Center Distance: 50 mm.

You can see an example of mounting the L-connection pipe set to the heating device in the photo.

Download the installation instructions of product: RAUTITAN radiator bend

Rehau RAUTITAN L-connection pipe set is used for connecting RAUTITAN stabil and RAUTITAN flex pipes to the radiator. It can be mounted in one- and two-pipe systems. Only for underfloor heating. It is suitable for pipes DN16.

The set includes:

• Pair of L-shaped tubes;
• Fixing fitting fot mounting the pipe on the floor;
• Screw;
• Washer;
• Dowel (10 mm).

The tubes are made of stainless steel 15 x 1.0 mm in accordance with DIN EN 10088. Theconnecting elements are made, as tubes, of stainless steel in accordance with DIN EN 10088. The fixing fitting is made of galvanized steel. It is suitable for pipes DN20.

Center Distance: 50 mm.

You can see an example of mounting the L-connection pipe set to the heating device in the photo.

Download the installation instructions of product: RAUTITAN radiator bend

Rehau RAUTITAN L-connection pipe set is used for connection RAUTITAN stabil and RAUTITAN flex pipes to the heating system. Nnly for underfloor heating, and for mounting of the tubes to the floor set includes special fixing element. Comes with 2 L-shaped tubes made of stainless steel, screw, washer and dowel (10 mm). It can be used in single and two-pipe systems. It is used with pipes DN16.

Center Distance: 50 mm.

You can see an example of mounting the L-connection pipe set to the heating device in the photo.

Download the installation instructions of product: RAUTITAN radiator bend

Rehau RAUTITAN compression nut is designed for RAUTITAN stabil 16,2 x 2,6 pipes. It is connected to the heating collector Rehau G3/4".

Surface: galvanized.

Attention! The article is discontinued!

Rehau RAUTITAN union nipple set is used for connection RAUTITAN stabil pipes to distribution manifold or fixture with Eurocone G 3/4". The set includes 2 union connectors. Brass, which is used for manufacture of union connectors, complies with DIN EN 12164, DIN EN 12165, DIN EN 12168.

Scope of delivery:

• Thrust bush;
• Clamping ring;
• Union nut.

The surface of the union nut is nickel-plated.

SW - wrench size