Pressing of pipes

ATTENTION! This product is temporarily unavailable for order!

Application purpose:

• For cutting protective pipes and Mepla pipes

Scope of delivery:

• Mepla spare cutting wheel

ATTENTION! This product is temporarily unavailable for order!

Application purpose:

• For bending Mepla pipes

Characteristics:

• Hydraulic

Scope of delivery:

• Pump housing
• 4 bending cheeks dia. 16, 20, 26, 32 mm
• 4 bending dies dia. 16, 20, 26, 32 mm
• Case
• Two-metre ruler
• Marker pen

Download operation manual: Geberit hand-operated bending tool hydraulic

It can be used with:

Mechanical assembly tool RAUTOOL M-light is used for installation of REHAU pipes and fittings pipe which is based on the use of compression sleeves. It is suitable for pipes with diameters of 16-40 mm.

The basic kit includes:

• RAUTOOL M-light;
• Operating instruction.

ATTENTION! This product is temporarily unavailable for order!

Application purpose:

• For cutting protective pipes and Mepla pipes

Scope of delivery:

• Mepla spare cutting wheel

ATTENTION! This product is temporarily unavailable for order!

Application purpose:

• For bending Mepla pipes

Characteristics:

• Galvanized

Installation tool Rehau Rautool K14 is used for pulling compression sleeves on the Rehau pipes which are made of crossed linked polyethylene. For the pipes 14x1,5 mm.

The advantages of the Rautool K 14:

• Compactness;
• The tool can be used both for compression and expansion;
• Easy to use;
• Save time and money;
• Tool need no maintenance.

The kit of Rautool K14 includes:

• Combined tool for compression and expansion;
• Pipe cutter 25;
• The transportation container;
• Manual.

ATTENTION! This product is temporarily unavailable for order!

Application purpose:

• For bending Mepla pipes

Characteristics:

• Galvanized

ATTENTION! This product is temporarily unavailable for order!

Application purpose:

• For cutting Mapress Stainless Steel, Carbon Steel and Mapress CuNiFe pipes

Description:

The pipe cutter is used for cutting pipes with diameters from 12 to 54 mm.

Manual installation tool Rehau Rautool K10 is used when installing REHAU piping systems, connected with using compression sleeves. The tool allows installing pipes with diameter of 10x1,1 mm.

Rautool K10 is characterized by ease, simplicity, convenience and compactness, it does not require maintenance. Rehau Rautool K10 saves money and time because it can be used not only for expansion the pipe but also for compression.

The set includes:

• Pipe cutter 25;
• Rautool K10;
• The transportation container;
• Manual.

ATTENTION! This product is temporarily unavailable for order!

Application purpose:

• For cutting Mapress Stainless Steel, Carbon Steel and Mapress CuNiFe pipes

Description:

The pipe cutter is used for cutting pipes with diameters from 12 to 35 mm.

ATTENTION! This product is temporarily unavailable for order!

Application purpose:

• For bending tool, hydraulic

Description:

Case for storage and transportation of the hand-operated bending tool with accessories that can be required when installing Geberit piping systems. 

The Geberit hand-operated bending tool is used for bending Mepla pipes with diameters ranging from 16 mm to 32 mm.

Rehau RAUTOOL M1 is installation tool which is used for installation of REHAU heating and water pipes connected using compression sleeves. RAUTOOL M1 is suitable for pipe sizes: 16-40 mm.

The advantages of RAUTOOL M1:

• The use double compression jaws, 2 pipe sizes may be processed without changing of tool;
• Compact construction allows the installation of the pipeline in any condition;
• Tool Rehau RAUTOOL M1 saves time;
• Reliability and durability;
• The tool does not require maintenance;
• Easy to operate;
• Attractive price.

The kit of RAUTOOL M1 includes:

• RAUTOOL M1;
• 2 anchor pins;
• Pipe cutter 40 Stabil;
• Expander RO;
• Brush for clearing the tool;
• A tube with lubricant;
• The transportation container;
• User's manual.

If necessary, kit of RAUTOOL M1 can be complemented with the following devices:

• Replaceable sets of M1;
• Compression jaws (single or double);
• Pipe benders for RAUTITAN Stabil pipes;
• Expander heads;
• Pipe cutters.

ATTENTION! This product is temporarily unavailable for order!

Application purpose:

• For cutting protective pipes and Mepla pipes
• For deburring and calibrating Mepla pipe ends

Characteristics:

• With calibration and deburring mandrel

Download installation guide: Geberit Mepla pliers

Expander tool RO is designed for expansion the REHAU plastic pipes, and it is a part of the manual tool Rautool M1 which is designed for installation of piping systems.

The expander tool is made of durable material, so it is resistant to corrosion and mechanical damage. The connection is screw, the expander tool is suitable for use RO expander heads.

ATTENTION! This product is temporarily unavailable for order!

Application purpose:

• For deburring Mepla pipe ends dia. 75 mm
• May not be used for deburring Geberit Mepla system pipe ends dia. 16 – 50 mm

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

• For Geberit pressing tools HCPS: 691.420.P0.1, 691.420.P5.1 and 691.422.1P.1.

Pressing collar DN88,9 is used in conjunction with the pressing tool HCPS, and it allows to crimp of the Geberit Mapress pipes. The pressing tool HCPS is connected to the mains, it is safe and easy to use.

The Geberit Mapress pipe system is made of different types of steel, and it can be used in heating systems, water supply systems, gas supply systems and sprinkler systems.

Manual expander tool Quick Change allows to make the expansion of plastic pipes with diameters from 16 to 32 mm. The expander tool is used expander heads Quick Change for expansion the pipes. If necessary, the new generation of REHAU expander tool can be used with the previous generation expander heads RO.

The new expander tool Quick Change has many advantages:

• Expander heads allows to quickly change the diameters;
• Expander is compatible with the previous generation of expander heads;
• Expander heads Quick Change have longitudinal surface corrugation, also they vary by color, so that you can identify expander head which is suitable for the pipe immediately.

ATTENTION! This product is temporarily unavailable for order!

Application purpose:

• For deburring and calibrating Mepla pipe ends

Description:

Special tool, developed by the Geberit Company, is designed for deburring and calibration Mepla pipes with diameters from 16 to 50 mm. This is required when installing the pipeline systems, in particular for improving of the weld quality.

Geberit Mepla pipes are multilayer and economical - the Geberit Mepla piping system can save up to 20% of the inputs for installation. Also, this system is characterized by durability, ecological safety and resistance to corrosion.

ATTENTION! This product is temporarily unavailable for order!

Application purposes:

• For Geberit pressing tools HCPS: 691.420.P0.1, 691.420.P5.1 and 691.422.1P.1.

Description:

Pressing collar DN108 is used in conjunction with the pressing tool HCPS, and it allows to crimp of the Geberit Mapress pipes. The pressing tool HCPS is connected to the mains, it is safe and easy to use.

The Geberit Mapress pipe system is made of different types of steel, and it can be used in heating systems, water supply systems, gas supply systems and sprinkler systems.

Rehau pipe grippers are used when installing the REHAU pipes, the pipe grippers can be used with pipes DN16/17/20. It can be used with corrugated pipe.

The pipe gripper allows to push the pipe insulation at the joint, which simplifies installation greatly.