Logo
Ru| En
Loading

PAM-GLOBAL® UNIGRIP-KRALLE

Installation manual for strengthen connecting element PAM-GLOBAL®-UNIGRIP-KRALLE

Pipes are connected by a coupling Two parts of UNIGRIP-KRALLE are put on the coupling Bolts of UNIGRIP-KRALLE grip collar are tightened evenly
Lower bolt is tightened Upper bolt is tightened The bolts are tightened to complete connection parts UNIGRIP-KRALLE

Element should be evenly fold cast-iron pipe, so:  

- Reinforcing collar put on PAM-GLOBAL® RAPID-S-W2, PAM-GLOBAL® CV, so that his teeth do not damage the housing coupling elements;

-Tighten the screws evenly until the complete contact between two parts of the elements PAM-GLOBAL®-  UNIGRIP-KRALLE.  

 

Installation of the grip collar PAM-GLOBAL®  on a bend 15°

Example of mounting the UNIGRIP-KRALLE grip collar on a bend

1. Loosely connect the two grip collars.

2. Carefully move grip collar into the desired position without damaging outer layer of the pipe.

3. Tighten the screws after move grip collar into the desired position. Screws are tightened alternately on both grip collars.

 

Installation of the grip collar PAM-GLOBAL®  on a T-brach 45°

Example of mounting the UNIGRIP-KRALLE grip collar on a T-brach

1. One of the opposing grip collars on the connector easy mount, screws yet not tighten.

2. Then one half of the second grip collar is set in the desired position.

3. Both halves are joined together. Make sure that nothing will prevent tighten the screws.

4. Tighten the screws criss-cross on both clamps alternately.

Go to the Catalogue and view grip collar for coupling Unigrip-Kralle