Logo
Ru| En
Loading

Wavin Ecoplastik pipes made of polypropylene

Wavin Ecoplastik pipes enjoy huge popularity in the world and they are divided into several types:

  • S 5 (PN 10) - these pipes are used for installing floor heating system and cold water supply, they are made of plastic;
  • S 3,2 (PN 16) - plastic pipes are intended for hot and cold water supply and floor heating system;
  • S 2,5 (PN 20) - plastic pipes are used for installing central heating system and hot water supply;
  • Stabi - multilayer pipes are used for hot water supply and central heating system. Three-layer pipes with an aluminum foil have an oxygen barrier made of a new generation of polypropylene PP-RCT;
  • STABI PLUS - it is three-layer pipes. The inner layer is made of polypropylene Type 4 (PP - RCT). The middle layer is an aluminum foil, and it prevents leakage of oxygen. Outer layer is made of polypropylene (PPR). This type of pipes has increased service life - it is at least 50 years;
  • Fiber Basalt Plus - multilayer pipes are intended for water supply and heating system. Three-layer pipes have basalt fiber. They are suitable for hot water and heating. When installing they do not require stripping before welding. The linear expansion of the pipes is 3 times less than that of the PPR pipes;
  • THERM PLUS - pipes are intended for installation of heating systems.

Variety of Wavin Ecoplastik pipes allows to use their in various objects.

Wavin Ecoplastik pipes are characterized by high ecological safety. Termal conductivity of the pipes is 0.22 W/m°C. Class of fire safety C3.

Thermal expansion of Ekoplastik Stabi pipes is 0.05 mm/m°C and thermal expansion of Ekoplastik PPR pipes is 0.12 mm/m°C. More information about linear change you can see here.

You can see approximate operating parameters in the table.

Photo Наименование Article Цена

WAVIN ECOPLASTIK PPRC Pipe, PN 10, cost of 1 m, d 25x2,3 [Code number: STR025P10X]

Details
STR025P10X 92 rub

WAVIN EKOPLASTIK PPRC pipes can be used:

  • For installation of cold water supply systems;
  • For underfloor heating.

Pipes are made of Type 3 polypropylene (PPR).

Operating parameters of PPR piping systems are presented here.

D t I Pack Weight
mm mm mm m kg/m
25 2,3 4000 60 0,164

Download installation manual of product: Wavin Ekoplastik pipe Wavin Ekoplastik pipe

WAVIN ECOPLASTIK PPRC Pipe, PN 10, cost of 1 m, d 32х2,9 [Code number: STR032P10X]

Details
STR032P10X 133 rub

WAVIN EKOPLASTIK PPRC pipes can be used:

  • For installation of cold water supply systems;
  • For underfloor heating.

Pipes are made of Type 3 polypropylene (PPR).

Operating parameters of PPR piping systems are presented here.

D t I Pack Weight
mm mm mm m kg/m
32 2,9 4000 40 0,258

Download installation manual of product: Wavin Ekoplastik pipe Wavin Ekoplastik pipe

WAVIN ECOPLASTIK PPRC Pipe, PN 10, cost of 1 m, d 40x3,7 [Code number: STR040P10X]

Details
STR040P10X 208 rub

WAVIN EKOPLASTIK PPRC pipes can be used:

  • For installation of cold water supply systems;
  • For underfloor heating.

Pipes are made of Type 3 polypropylene (PPR).

Operating parameters of PPR piping systems are presented here.

D t I Pack Weight
mm mm mm m kg/m
40 3,7 4000 24 0,413

Download installation manual of product: Wavin Ekoplastik pipe Wavin Ekoplastik pipe

WAVIN ECOPLASTIK PPRC Pipe, PN 10, cost of 1 m, d 63x5,8 [Code number: STR063P10X]

Details
STR063P10X 520 rub

WAVIN EKOPLASTIK PPRC pipes can be used:

  • For installation of cold water supply systems;
  • For underfloor heating.

Pipes are made of Type 3 polypropylene (PPR).

Operating parameters of PPR piping systems are presented here.

D t I Pack Weight
mm mm mm m kg/m
63 5,8 4000 12 1,004

Download installation manual of product: Wavin Ekoplastik pipe Wavin Ekoplastik pipe

WAVIN ECOPLASTIK PPRC Pipe, PN 10, cost of 1 m, d75x6,8 [Code number: STR075P10X]

Details
STR075P10X 760 rub

WAVIN EKOPLASTIK PPRC pipes can be used:

  • For installation of cold water supply systems;
  • For underfloor heating.

Pipes are made of Type 3 polypropylene (PPR).

Operating parameters of PPR piping systems are presented here.

D t I Pack Weight
mm mm mm m kg/m
75 6,8 4000 8 1,401

Download installation manual of product: Wavin Ekoplastik pipe Wavin Ekoplastik pipe

WAVIN ECOPLASTIK PPRC Pipe, PN 10, cost of 1 m, d 90x8,2 [Code number: STR090P10X]

Details
STR090P10X 1 075 rub

WAVIN EKOPLASTIK PPRC pipes can be used:

  • For installation of cold water supply systems;
  • For underfloor heating.

Pipes are made of Type 3 polypropylene (PPR).

Operating parameters of PPR piping systems are presented here.

D t I Pack Weight
mm mm mm m kg/m
90 8,2 4000 4 2,014

Download installation manual of product: Wavin Ekoplastik pipe Wavin Ekoplastik pipe

WAVIN ECOPLASTIK PPRC Pipe, PN 10, cost of 1 m, d125x11,4 [Code number: STR125P10X]

Details
STR125P10X 2 161 rub

WAVIN EKOPLASTIK PPRC pipes can be used:

  • For installation of cold water supply systems;
  • For underfloor heating.

Pipes are made of Type 3 polypropylene (PPR).

Operating parameters of PPR piping systems are presented here.

D t I Pack Weight
mm mm mm m kg/m
125 11,4 4000 4 3,910

Download installation manual of product: Wavin Ekoplastik pipe Wavin Ekoplastik pipe

WAVIN ECOPLASTIK PPRC Pipe, PN 16, cost of 1 m, d16x2,2 [Code number: STR016P16X]

Details
STR016P16X 59 rub

WAVIN EKOPLASTIK PPRC pipes can be used:

  • For installation of cold water supply systems;
  • For installation of hot water supply systems and underfloor heating.

Pipes are made of Type 3 polypropylene (PPR).

Operating parameters of PPR piping systems are presented here.

D t I Pack Weight
mm mm mm m kg/m
16 2,2 4000 160 0,094

Download installation manual of product: Wavin Ekoplastik pipe Wavin Ekoplastik pipe

WAVIN ECOPLASTIK PPRC Pipe, PN 16, cost of 1 m, d32x4,4 [Code number: STR032P16X]

Details
STR032P16X 164 rub

WAVIN EKOPLASTIK PPRC pipes can be used:

  • For installation of cold water supply systems;
  • For installation of hot water supply systems and underfloor heating.

Pipes are made of Type 3 polypropylene (PPR).

Operating parameters of PPR piping systems are presented here.

D t I Pack Weight
mm mm mm m kg/m
32 4,4 4000 40 0,367

Download installation manual of product: Wavin Ekoplastik pipe Wavin Ekoplastik pipe

WAVIN ECOPLASTIK PPRC Pipe, PN 16, cost of 1 m, d40x5,5 [Code number: STR040P16X]

Details
STR040P16X 253 rub

WAVIN EKOPLASTIK PPRC pipes can be used:

  • For installation of cold water supply systems;
  • For installation of hot water supply systems and underfloor heating.

Pipes are made of Type 3 polypropylene (PPR).

Operating parameters of PPR piping systems are presented here.

D t I Pack Weight
mm mm mm m kg/m
40 5,5 4000 24 0,566

Download installation manual of product: Wavin Ekoplastik pipe Wavin Ekoplastik pipe

WAVIN ECOPLASTIK PPRC Pipe, PN 16, cost of 1 m, d 50x6,9 [Code number: STR050P16X]

Details
STR050P16X 400 rub

WAVIN EKOPLASTIK PPRC pipes can be used:

  • For installation of cold water supply systems;
  • For installation of hot water supply systems and underfloor heating.

Pipes are made of Type 3 polypropylene (PPR).

Operating parameters of PPR piping systems are presented here.

D t I Pack Weight
mm mm mm m kg/m
50 6,9 4000 16 0,886

Download installation manual of product: Wavin Ekoplastik pipe Wavin Ekoplastik pipe

WAVIN ECOPLASTIK PPRC Pipe FIBER BASALT PLUS S 3,2, cost of 1 m, d 20x2,8 [Code number: STRFB020TRCT]

Details
STRFB020TRCT 160 rub

Pipe FIBER BASALT PLUS can be used for the installation of water supply systems and high-temperature heating systems.

The main advantages of FIBER BASALT PLUS pipes:

  • Increased pressure resistance at high temperatures compared with other types of pipes, including FIBER pipes;
  • Temperature resistance - the pipe can withstand temperatures up to +90 °C;
  • High flow rate;
  • Low linear thermal expansion;
  • It does not require shaving before welding.

The pipe consists of 3 layers: inner and outer layers are made of PP-RCT, polypropylene of new generation, and middle layer is made of PP-RCT with basalt fiber, which increases the strength and pressure resistance of pipe.

Pipe FIBER BASALT PLUS can withstand pressure up to 10 bar at the operating temperature up to +70 °C and pressures up to 8 bar at the maximum operating temperature (+90 °C).

Thermal linear expansion: 0.05 mm/m/°C.

D t I Pack Weight
mm mm mm m kg/m
20 2,8 4000 100 0,153

Download installation manual of product: FIBER BASALT PLUS pipe FIBER BASALT PLUS pipe

Wavin Ecoplastik Therm Pipe, PN 20, cost of 0,4 m, d 20x3,4 [Code number: BTR020P204]

Details
BTR020P204 39 rub

The connecting pipe is used when length of THERM PLUS pipe is below 70 mm, so that it can not be scalped.

Wavin Ekoplastik Therm Plus pipes belong to a new generation of Wavin pipes. They consist of three layers:

  • Outer layer made of PPR;
  • AL middle layer without perforation;
  • Inner layer of PP-RCT.

The Ekoplastik Therm pipes provide the following advantages:

  • High resistance to temperature and pressure at temperatures up to +90 °C;
  • Increased flow area;
  • 100% oxygen barrier;
  • Low linear expansion;
  • Diameters from 20 to 40 mm;
  • Full range of fittings and a wide range of special components;
  • Service life of about 50 years.
D t l Weight
mm mm mm kg/pc
20 3,4 400 0,076

Download installation manual of product: Труба Wavin Ekoplastik Therm Wavin Ekoplastik Therm pipe

Wavin Ekoplastik Therm Pipe, PN 20, cost of 0,4 m, d 40x6,7 [Code number: BTR040P204]

Details
BTR040P204 140 rub

The connecting pipe is used when length of THERM PLUS pipe is below 70 mm, so that it can not be scalped.

Wavin Ekoplastik Therm Plus pipes belong to a new generation of Wavin pipes. They consist of three layers:

  • Outer layer made of PPR;
  • AL middle layer without perforation;
  • Inner layer of PP-RCT.

The Ekoplastik Therm pipes provide the following advantages:

  • High resistance to temperature and pressure at temperatures up to +90 °C;
  • Increased flow area;
  • 100% oxygen barrier;
  • Low linear expansion;
  • Diameters from 20 to 40 mm;
  • Full range of fittings and a wide range of special components;
  • Service life of about 50 years.
D t l Weight
mm mm mm kg/pc
40 6,7 400 0,302

Download installation manual of product: Труба Wavin Ekoplastik Therm Wavin Ekoplastik Therm pipe

WAVIN ECOPLASTIK PPRC Pipe, PN 16, cost of 1 m, d90x12,3 [Code number: STR090P16X]

Details
STR090P16X 1 394 rub

WAVIN EKOPLASTIK PPRC pipes can be used:

  • For installation of cold water supply systems;
  • For installation of hot water supply systems and underfloor heating.

Pipes are made of Type 3 polypropylene (PPR).

Operating parameters of PPR piping systems are presented here.

D t I Pack Weight
mm mm mm m kg/m
90 12,3 4000 4 2,839

Download installation manual of product: Wavin Ekoplastik pipe Wavin Ekoplastik pipe

WAVIN ECOPLASTIK PPRC Pipe, PN 16, cost of 1 m, d110x15,1 [Code number: STR110P16X]

Details
STR110P16X 2 085 rub

WAVIN EKOPLASTIK PPRC pipes can be used:

  • For installation of cold water supply systems;
  • For installation of hot water supply systems and underfloor heating.

Pipes are made of Type 3 polypropylene (PPR).

Operating parameters of PPR piping systems are presented here.

D t I Pack Weight
mm mm mm m kg/m
110 15,1 4000 4 4,274

Download installation manual of product: Wavin Ekoplastik pipe Wavin Ekoplastik pipe

WAVIN ECOPLASTIK PPRC Pipe, PN 20, cost of 1 m, d16x2,7 [Code number: STR016P20X]

Details
STR016P20X 61 rub

WAVIN EKOPLASTIK PPRC pipes can be used:

  • For installation of cold water supply systems;
  • For installation of hot water supply systems and central heating systems (at temperatures up to +70 °C).

Pipes are made of Type 3 polypropylene (PPR).

Operating parameters of PPR piping systems are presented here.

D t I Pack Weight
mm mm mm m kg/m
16 2,7 4000 160 0,107

Download installation manual of product: Wavin Ekoplastik pipe Wavin Ekoplastik pipe

WAVIN ECOPLASTIK PPRC Pipe, PN 20, cost of 1 m, d20x3,4 [Code number: STR020P20X]

Details
STR020P20X 75 rub

WAVIN EKOPLASTIK PPRC pipes can be used:

  • For installation of cold water supply systems;
  • For installation of hot water supply systems and central heating systems (at temperatures up to +70 °C).

Pipes are made of Type 3 polypropylene (PPR).

Operating parameters of PPR piping systems are presented here.

D t I Pack Weight
mm mm mm m kg/m
20 3,4 4000 100 0,169

Download installation manual of product: Wavin Ekoplastik pipe Wavin Ekoplastik pipe

WAVIN ECOPLASTIK PPRC Pipe, PN 20, cost of 1 m, d90x15,0 [Code number: STR090P20X]

Details
STR090P20X 1 668 rub

WAVIN EKOPLASTIK PPRC pipes can be used:

  • For installation of cold water supply systems;
  • For installation of hot water supply systems and central heating systems (at temperatures up to +70 °C).

Pipes are made of Type 3 polypropylene (PPR).

Operating parameters of PPR piping systems are presented here.

D t I Pack Weight
mm mm mm m kg/m
90 15,0 4000 4 3,332

Download installation manual of product: Wavin Ekoplastik pipe Wavin Ekoplastik pipe

WAVIN ECOPLASTIK PPRC Pipe, PN 20, cost of 1 m, d110x18,3 [Code number: STR110P20X]

Details
STR110P20X 2 452 rub

WAVIN EKOPLASTIK PPRC pipes can be used:

  • For installation of cold water supply systems;
  • For installation of hot water supply systems and central heating systems (at temperatures up to +70 °C).

Pipes are made of Type 3 polypropylene (PPR).

Operating parameters of PPR piping systems are presented here.

D t I Pack Weight
mm mm mm m kg/m
110 18,3 4000 4 4,977

Download installation manual of product: Wavin Ekoplastik pipe Wavin Ekoplastik pipe

WAVIN ECOPLASTIK PPRC Pipe, PN 20, cost of 1 m, d125x20,8 [Code number: STR125P20X]

Details
STR125P20X 3 639 rub

WAVIN EKOPLASTIK PPRC pipes can be used:

  • For installation of cold water supply systems;
  • For installation of hot water supply systems and central heating systems (at temperatures up to +70 °C).

Pipes are made of Type 3 polypropylene (PPR).

Operating parameters of PPR piping systems are presented here.

D t I Pack Weight
mm mm mm m kg/m
125 20,8 4000 4 6,470

Download installation manual of product: Wavin Ekoplastik pipe Wavin Ekoplastik pipe

WAVIN ECOPLASTIK PPRC Pipe in coil, PN 10, cost of 1 m, d 20x2,2 [Code number: STRK020P11]

Details
STRK020P11 68 rub

WAVIN EKOPLASTIK PPRC pipes can be used:

  • For installation of cold water supply systems;
  • For underfloor heating.

Pipes are made of Type 3 polypropylene (PPR).

Operating parameters of PPR piping systems are presented here.

D S (PN) SDR t I Weight
mm     mm m kg/m
20 5,0 (10) 11 2,2 100 0,121

Download installation manual of product: Wavin Ekoplastik pipe Wavin Ekoplastik pipe

WAVIN ECOPLASTIK PPRC Pipe in coil, PN 20, cost of 1 m, d 16x2,7 [Code number: STRK016P21]

Details
STRK016P21 61 rub

WAVIN EKOPLASTIK PPRC pipes can be used:

  • For installation of cold water supply systems;
  • For installation of hot water supply systems and central heating systems (at temperatures up to +70 °C).

Pipes are made of Type 3 polypropylene (PPR).

Operating parameters of PPR piping systems are presented here.

D S (PN) SDR t I Weight
mm     mm m kg/m
16 2,5 (20) 6 2,7 100 0,107

Download installation manual of product: Wavin Ekoplastik pipe Wavin Ekoplastik pipe

WAVIN ECOPLASTIK PPRC Pipe STABI, cost of 1 m, d16x2,7 [Code number: STRSK016P2]

Details
STRSK016P2 128 rub

WAVIN EKOPLASTIK PPRC pipes can be used:

  • For installation of cold water supply systems;
  • For installation of hot water supply systems and central heating systems (at temperatures up to +70 °C).

Pipes are made of Type 3 polypropylene (PPR).

Pipe STABI PLUS is three-layer pipe and reinforce.

Operating parameters of PPR piping systems are presented here.

D t I PN Weight
mm mm m   kg/m
16 2,3 100,0 20 0,165

Download installation manual of product: Wavin Ekoplastik STABI pipe Wavin Ekoplastik STABI pipe

WAVIN ECOPLASTIK PPRC Pipe STABI PLUS, cost of 1 m, d16 [Code number: STRS016RCT]

Details
STRS016RCT 116 rub

Pipe STABI PLUS is three-layer pipe:

  • Inner layer made of Type 4 polypropylene (PP-RCT) and has wall thickness as the pipe S 3,2 and S 4;
  • Middle layer of aluminum;
  • Outer layer made of polypropylene.

During the production the inner pipe is associated with the aluminum layer and then it is covered with an outer layer of polypropylene. Thanks to the non-perforated aluminum layer the STABI PLUS pipes have an 100% oxygen barrier. Thin polypropylene layer protects the aluminum layer against mechanical damage.

The main advantages of STABI PLUS pipes:

  • Increased stiffness;
  • Linear expansion is 3 times lower than that of conventional polypropylene pipes;
  • Is suitable for hot water and central heating;
  • Oxygen barrier.

Operating parameters of PPR piping systems are presented here.

D t I D1 Pack Weight
mm mm mm mm m kg/m
16 2,2 4000 17,9 120 0,137

Download installation manual of product: Wavin STABI PLUS pipe Wavin STABI PLUS pipe

WAVIN ECOPLASTIK PPRC Pipe STABI PLUS, cost of 1 m, d20 [Code number: STRS020RCT]

Details
STRS020RCT 158 rub

Pipe STABI PLUS is three-layer pipe:

  • Inner layer made of Type 4 polypropylene (PP-RCT) and has wall thickness as the pipe S 3,2 and S 4;
  • Middle layer of aluminum;
  • Outer layer made of polypropylene.

During the production the inner pipe is associated with the aluminum layer and then it is covered with an outer layer of polypropylene. Thanks to the non-perforated aluminum layer the STABI PLUS pipes have an 100% oxygen barrier. Thin polypropylene layer protects the aluminum layer against mechanical damage.

The main advantages of STABI PLUS pipes:

  • Increased stiffness;
  • Linear expansion is 3 times lower than that of conventional polypropylene pipes;
  • Is suitable for hot water and central heating;
  • Oxygen barrier.

Operating parameters of PPR piping systems are presented here.

D t I D1 Pack Weight
mm mm mm mm m kg/m
20 2,8 4000 21,9 80 0,207

Download installation manual of product: Wavin STABI PLUS pipe Wavin STABI PLUS pipe

WAVIN ECOPLASTIK PPRC Pipe STABI PLUS, cost of 1 m, d25 [Code number: STRS025RCT]

Details
STRS025RCT 230 rub

Pipe STABI PLUS is three-layer pipe:

  • Inner layer made of Type 4 polypropylene (PP-RCT) and has wall thickness as the pipe S 3,2 and S 4;
  • Middle layer of aluminum;
  • Outer layer made of polypropylene.

During the production the inner pipe is associated with the aluminum layer and then it is covered with an outer layer of polypropylene. Thanks to the non-perforated aluminum layer the STABI PLUS pipes have an 100% oxygen barrier. Thin polypropylene layer protects the aluminum layer against mechanical damage.

The main advantages of STABI PLUS pipes:

  • Increased stiffness;
  • Linear expansion is 3 times lower than that of conventional polypropylene pipes;
  • Is suitable for hot water and central heating;
  • Oxygen barrier.

Operating parameters of PPR piping systems are presented here.

D t I D1 Pack Weight
mm mm mm mm m kg/m
25 3,5 4000 26,9 60 0,298

Download installation manual of product: Wavin STABI PLUS pipe Wavin STABI PLUS pipe

WAVIN ECOPLASTIK PPRC Pipe STABI PLUS, cost of 1 m, d63 [Code number: STRS063RCT]

Details
STRS063RCT 1 126 rub

Pipe STABI PLUS is three-layer pipe:

  • Inner layer made of Type 4 polypropylene (PP-RCT) and has wall thickness as the pipe S 3,2 and S 4;
  • Middle layer of aluminum;
  • Outer layer made of polypropylene.

During the production the inner pipe is associated with the aluminum layer and then it is covered with an outer layer of polypropylene. Thanks to the non-perforated aluminum layer the STABI PLUS pipes have an 100% oxygen barrier. Thin polypropylene layer protects the aluminum layer against mechanical damage.

The main advantages of STABI PLUS pipes:

  • Increased stiffness;
  • Linear expansion is 3 times lower than that of conventional polypropylene pipes;
  • Is suitable for hot water and central heating;
  • Oxygen barrier.

Operating parameters of PPR piping systems are presented here.

D t I D1 Pack Weight
mm mm mm mm m kg/m
63 8,6 4000 65,0 8 1,587

Download installation manual of product: Wavin STABI PLUS pipe Wavin STABI PLUS pipe

WAVIN ECOPLASTIK PPRC Pipe STABI PLUS, cost of 1 m, d110 [Code number: STRS110RCT]

Details
STRS110RCT 4 289 rub

Pipe STABI PLUS is three-layer pipe:

  • Inner layer made of Type 4 polypropylene (PP-RCT) and has wall thickness as the pipe S 3,2 and S 4;
  • Middle layer of aluminum;
  • Outer layer made of polypropylene.

During the production the inner pipe is associated with the aluminum layer and then it is covered with an outer layer of polypropylene. Perforated aluminum layer provides a higher level of oxygen barrier than the required DIN and EN standards. Thin polypropylene layer protects the aluminum layer against mechanical damage.

The main advantages of STABI PLUS pipes:

  • Increased stiffness;
  • Linear expansion is 3 times lower than that of conventional polypropylene pipes;
  • Is suitable for hot water and central heating;
  • Oxygen barrier.

Operating parameters of PPR piping systems are presented here.

D t I D1 Pack Weight
mm mm mm mm m kg/m
110 12,3 4000 112,0 4 4,022

Download installation manual of product: Wavin STABI PLUS pipe Wavin STABI PLUS pipe

WAVIN ECOPLASTIK PPRC Pipe FIBER BASALT PLUS S 3,2, cost of 1 m, d32x4,4 [Code number: STRFB032TRCT]

Details
STRFB032TRCT 349 rub

Pipe FIBER BASALT PLUS can be used for the installation of water supply systems and high-temperature heating systems.

The main advantages of FIBER BASALT PLUS pipes:

  • Increased pressure resistance at high temperatures compared with other types of pipes, including FIBER pipes;
  • Temperature resistance - the pipe can withstand temperatures up to +90 °C;
  • High flow rate;
  • Low linear thermal expansion;
  • It does not require shaving before welding.

The pipe consists of 3 layers: inner and outer layers are made of PP-RCT, polypropylene of new generation, and middle layer is made of PP-RCT with basalt fiber, which increases the strength and pressure resistance of pipe.

Pipe FIBER BASALT PLUS can withstand pressure up to 10 bar at the operating temperature up to +70 °C and pressures up to 8 bar at the maximum operating temperature (+90 °C).

Thermal linear expansion: 0.05 mm/m/°C.

D t I Pack Weight
mm mm mm m kg/m
32 4,4 4000 40 0,385

Download installation manual of product: FIBER BASALT PLUS pipe FIBER BASALT PLUS pipe

WAVIN ECOPLASTIK PPRC Pipe FIBER BASALT PLUS S 3,2, cost of 1 m, d 50x6,9 [Code number: STRFB050TRCT]

Details
STRFB050TRCT 840 rub

Pipe FIBER BASALT PLUS can be used for the installation of water supply systems and high-temperature heating systems.

The main advantages of FIBER BASALT PLUS pipes:

  • Increased pressure resistance at high temperatures compared with other types of pipes, including FIBER pipes;
  • Temperature resistance - the pipe can withstand temperatures up to +90 °C;
  • High flow rate;
  • Low linear thermal expansion;
  • It does not require shaving before welding.

The pipe consists of 3 layers: inner and outer layers are made of PP-RCT, polypropylene of new generation, and middle layer is made of PP-RCT with basalt fiber, which increases the strength and pressure resistance of pipe.

Pipe FIBER BASALT PLUS can withstand pressure up to 10 bar at the operating temperature up to +70 °C and pressures up to 8 bar at the maximum operating temperature (+90 °C).

Thermal linear expansion: 0.05 mm/m/°C.

D t I Pack Weight
mm mm mm m kg/m
50 6,9 4000 16 0,941

Download installation manual of product: FIBER BASALT PLUS pipe FIBER BASALT PLUS pipe

WAVIN ECOPLASTIK PPRC Pipe FIBER BASALT PLUS S 4, cost of 1 m, d75x8,4 [Code number: STRFB075TRCT]

Details
STRFB075TRCT 1 683 rub

Pipe FIBER BASALT PLUS can be used for the installation of water supply systems and high-temperature heating systems.

The main advantages of FIBER BASALT PLUS pipes:

  • Increased pressure resistance at high temperatures compared with other types of pipes, including FIBER pipes;
  • Temperature resistance - the pipe can withstand temperatures up to +90 °C;
  • High flow rate;
  • Low linear thermal expansion;
  • It does not require shaving before welding.

The pipe consists of 3 layers: inner and outer layers are made of PP-RCT, polypropylene of new generation, and middle layer is made of PP-RCT with basalt fiber, which increases the strength and pressure resistance of pipe.

Pipe FIBER BASALT PLUS can withstand pressure up to 10 bar at the operating temperature up to +70 °C and pressures up to 8 bar at the maximum operating temperature (+90 °C).

Thermal linear expansion: 0.05 mm/m/°C.

D t I Pack Weight
mm mm mm m kg/m
75 8,4 4000 8 1,764

Download installation manual of product: FIBER BASALT PLUS pipe FIBER BASALT PLUS pipe

WAVIN ECOPLASTIK PPRC Pipe FIBER BASALT PLUS S 4, cost of 1 m, d90x10,1 [Code number: STRFB090TRCT]

Details
STRFB090TRCT 2 287 rub

Pipe FIBER BASALT PLUS can be used for the installation of water supply systems and high-temperature heating systems.

The main advantages of FIBER BASALT PLUS pipes:

  • Increased pressure resistance at high temperatures compared with other types of pipes, including FIBER pipes;
  • Temperature resistance - the pipe can withstand temperatures up to +90 °C;
  • High flow rate;
  • Low linear thermal expansion;
  • It does not require shaving before welding.

The pipe consists of 3 layers: inner and outer layers are made of PP-RCT, polypropylene of new generation, and middle layer is made of PP-RCT with basalt fiber, which increases the strength and pressure resistance of pipe.

Pipe FIBER BASALT PLUS can withstand pressure up to 10 bar at the operating temperature up to +70 °C and pressures up to 8 bar at the maximum operating temperature (+90 °C).

Thermal linear expansion: 0.05 mm/m/°C.

D t I Pack Weight
mm mm mm m kg/m
90 10,1 4000 4 2,546

Download installation manual of product: FIBER BASALT PLUS pipe FIBER BASALT PLUS pipe

WAVIN ECOPLASTIK PPRC Pipe FIBER BASALT PLUS S 4, cost of 1 m, d110x12,3 [Code number: STRFB110TRCT]

Details
STRFB110TRCT 3 548 rub

Pipe FIBER BASALT PLUS can be used for the installation of water supply systems and high-temperature heating systems.

The main advantages of FIBER BASALT PLUS pipes:

  • Increased pressure resistance at high temperatures compared with other types of pipes, including FIBER pipes;
  • Temperature resistance - the pipe can withstand temperatures up to +90 °C;
  • High flow rate;
  • Low linear thermal expansion;
  • It does not require shaving before welding.

The pipe consists of 3 layers: inner and outer layers are made of PP-RCT, polypropylene of new generation, and middle layer is made of PP-RCT with basalt fiber, which increases the strength and pressure resistance of pipe.

Pipe FIBER BASALT PLUS can withstand pressure up to 10 bar at the operating temperature up to +70 °C and pressures up to 8 bar at the maximum operating temperature (+90 °C).

Thermal linear expansion: 0.05 mm/m/°C.

D t I Pack Weight
mm mm mm m kg/m
110 12,3 4000 4 3,781

Download installation manual of product: FIBER BASALT PLUS pipe FIBER BASALT PLUS pipe

Wavin Ecoplastik Therm Pipe THERM PLUS, cost of 1 m, d 40 [Code number: BTRS040TRCT]

Details
BTRS040TRCT 548 rub

Wavin Ekoplastik Therm Plus pipes belong to a new generation of Wavin pipes. They consist of three layers:

  • Outer layer made of PPR;
  • AL middle layer without perforation;
  • Inner layer of PP-RCT.

The Ekoplastik Therm pipes provide the following advantages:

  • High resistance to temperature and pressure at temperatures up to +90 °C;
  • Increased flow area;
  • 100% oxygen barrier;
  • Low linear expansion;
  • Diameters from 20 to 40 mm;
  • Full range of fittings and a wide range of special components;
  • Service life of about 50 years.
D t I D1 Weight
mm mm mm mm kg/m
40 5,5 4000 41,9 0,693

Download installation manual of product: Труба Wavin Ekoplastik Therm Wavin Ekoplastik Therm pipe

WAVIN EKOPLASTIK PPRC Pipe, PN 20, cost of 1 m, d32x5,4 [Code number: STR032P20X]

Details
STR032P20X 187 rub

WAVIN EKOPLASTIK PPRC pipes can be used:

  • For installation of cold water supply systems;
  • For installation of hot water supply systems and central heating systems (at temperatures up to +70 °C).

Pipes are made of Type 3 polypropylene (PPR).

Operating parameters of PPR piping systems are presented here.

D t I Pack Weight
mm mm mm m kg/m
32 5,4 4000 40 0,423

Download installation manual of product: Труба Wavin Ekoplastik Therm Wavin Ekoplastik pipe

WAVIN ECOPLASTIK PPRC Pipe, PN 20, cost of 1 m, d50x8,3 [Code number: STR050P20X]

Details
STR050P20X 513 rub

WAVIN EKOPLASTIK PPRC pipes can be used:

  • For installation of cold water supply systems;
  • For installation of hot water supply systems and central heating systems (at temperatures up to +70 °C).

Pipes are made of Type 3 polypropylene (PPR).

Operating parameters of PPR piping systems are presented here.

D t I Pack Weight
mm mm mm m kg/m
50 8,3 4000 16 1,013

Download installation manual of product: Труба Wavin Ekoplastik Therm Wavin Ekoplastik pipe

WAVIN EKOPLASTIK PPRC Pipe STABI PLUS, cost of 1 m, d75 [Code number: STRS075RCT]

Details
STRS075RCT 2 002 rub

Pipe STABI PLUS is three-layer pipe:

  • Inner layer made of Type 4 polypropylene (PP-RCT) and has wall thickness as the pipe S 3,2 and S 4;
  • Middle layer of aluminum;
  • Outer layer made of polypropylene.

During the production the inner pipe is associated with the aluminum layer and then it is covered with an outer layer of polypropylene. Perforated aluminum layer provides a higher level of oxygen barrier than the required DIN and EN standards. Thin polypropylene layer protects the aluminum layer against mechanical damage.

The main advantages of STABI PLUS pipes:

  • Increased stiffness;
  • Linear expansion is 3 times lower than that of conventional polypropylene pipes;
  • Is suitable for hot water and central heating;
  • Oxygen barrier.

Operating parameters of PPR piping systems are presented here.

D t I D1 Pack Weight
mm mm mm mm m kg/m
75 8,4 4000 77,0 8 1,860

Download installation manual of product: Wavin STABI PLUS pipe Wavin STABI PLUS pipe

Wavin Ecoplastik Therm Pipe, PN 20, cost of 0,4 m, d 32x5,4 [Code number: BTR032P204]

Details
BTR032P204 94 rub

The connecting pipe is used when length of THERM PLUS pipe is below 70 mm, so that it can not be scalped.

Wavin Ekoplastik Therm Plus pipes belong to a new generation of Wavin pipes. They consist of three layers:

  • Outer layer made of PPR;
  • AL middle layer without perforation;
  • Inner layer of PP-RCT.

The Ekoplastik Therm pipes provide the following advantages:

  • High resistance to temperature and pressure at temperatures up to +90 °C;
  • Increased flow area;
  • 100% oxygen barrier;
  • Low linear expansion;
  • Diameters from 20 to 40 mm;
  • Full range of fittings and a wide range of special components;
  • Service life of about 50 years.
D t l Weight
mm mm mm kg/pc
32 5,4 400 0,203

Download installation manual of product: Труба Wavin Ekoplastik Therm Wavin Ekoplastik Therm pipe

WAVIN ECOPLASTIK PPRC Pipe, PN 10, cost of 1 m, d 20x2,2 [Code number: STR020P10X]

Details
STR020P10X 66 rub

WAVIN EKOPLASTIK PPRC pipes can be used:

  • For installation of cold water supply systems;
  • For underfloor heating.

Pipes are made of Type 3 polypropylene (PPR).

Operating parameters of PPR piping systems are presented here.

D t I Pack Weight
mm mm mm m kg/m
20 2,2 4000 100 0,121

Download installation manual of product: Wavin Ekoplastik pipe Wavin Ekoplastik pipe

WAVIN ECOPLASTIK PPRC Pipe, PN 10, cost of 1 m, d110x10,0 [Code number: STR110P10X]

Details
STR110P10X 1 441 rub

WAVIN EKOPLASTIK PPRC pipes can be used:

  • For installation of cold water supply systems;
  • For underfloor heating.

Pipes are made of Type 3 polypropylene (PPR).

Operating parameters of PPR piping systems are presented here.

D t I Pack Weight
mm mm mm m kg/m
110 10,0 4000 4 3,009

Download installation manual of product: Wavin Ekoplastik pipe Wavin Ekoplastik pipe

WAVIN ECOPLASTIK PPRC Pipe, PN 16, cost of 1 m, d 25x3,5 [Code number: STR025P16X]

Details
STR025P16X 101 rub

WAVIN EKOPLASTIK PPRC pipes can be used:

  • For installation of cold water supply systems;
  • For installation of hot water supply systems and underfloor heating.

Pipes are made of Type 3 polypropylene (PPR).

Operating parameters of PPR piping systems are presented here.

D t I Pack Weight
mm mm mm m kg/m
25 3,5 4000 60 0,227

Download installation manual of product: Wavin Ekoplastik pipe Wavin Ekoplastik pipe

WAVIN ECOPLASTIK PPRC Pipe, PN 16, cost of 1 m, d63x8,6 [Code number: STR063P16X]

Details
STR063P16X 598 rub

WAVIN EKOPLASTIK PPRC pipes can be used:

  • For installation of cold water supply systems;
  • For installation of hot water supply systems and underfloor heating.

Pipes are made of Type 3 polypropylene (PPR).

Operating parameters of PPR piping systems are presented here.

D t I Pack Weight
mm mm mm m kg/m
63 8,6 4000 12 1,387

Download installation manual of product: Wavin Ekoplastik pipe Wavin Ekoplastik pipe

WAVIN ECOPLASTIK PPRC Pipe, PN 20, cost of 1 m, d25x4,2 [Code number: STR025P20X]

Details
STR025P20X 120 rub

WAVIN EKOPLASTIK PPRC pipes can be used:

  • For installation of cold water supply systems;
  • For installation of hot water supply systems and central heating systems (at temperatures up to +70 °C).

Pipes are made of Type 3 polypropylene (PPR).

Operating parameters of PPR piping systems are presented here.

D t I Pack Weight
mm mm mm m kg/m
25 4,2 4000 60 0,259

Download installation manual of product: Wavin Ekoplastik pipe Wavin Ekoplastik pipe

WAVIN ECOPLASTIK PPRC Pipe STABI PLUS, cost of 1 m, d32 [Code number: STRS032RCT]

Details
STRS032RCT 347 rub

Pipe STABI PLUS is three-layer pipe:

  • Inner layer made of Type 4 polypropylene (PP-RCT) and has wall thickness as the pipe S 3,2 and S 4;
  • Middle layer of aluminum;
  • Outer layer made of polypropylene.

During the production the inner pipe is associated with the aluminum layer and then it is covered with an outer layer of polypropylene. Thanks to the non-perforated aluminum layer the STABI PLUS pipes have an 100% oxygen barrier. Thin polypropylene layer protects the aluminum layer against mechanical damage.

The main advantages of STABI PLUS pipes:

  • Increased stiffness;
  • Linear expansion is 3 times lower than that of conventional polypropylene pipes;
  • Is suitable for hot water and central heating;
  • Oxygen barrier.

Operating parameters of PPR piping systems are presented here.

D t I D1 Pack Weight
mm mm mm mm m kg/m
32 4,4 4000 33,9 40 0,465

Download installation manual of product: Wavin STABI PLUS pipe Wavin STABI PLUS pipe

WAVIN ECOPLASTIK PPRC Pipe STABI PLUS, cost of 1 m, d90 [Code number: STRS090RCT]

Details
STRS090RCT 2 687 rub

Pipe STABI PLUS is three-layer pipe:

  • Inner layer made of Type 4 polypropylene (PP-RCT) and has wall thickness as the pipe S 3,2 and S 4;
  • Middle layer of aluminum;
  • Outer layer made of polypropylene.

During the production the inner pipe is associated with the aluminum layer and then it is covered with an outer layer of polypropylene. Perforated aluminum layer provides a higher level of oxygen barrier than the required DIN and EN standards. Thin polypropylene layer protects the aluminum layer against mechanical damage.

The main advantages of STABI PLUS pipes:

  • Increased stiffness;
  • Linear expansion is 3 times lower than that of conventional polypropylene pipes;
  • Is suitable for hot water and central heating;
  • Oxygen barrier.

Operating parameters of PPR piping systems are presented here.

D t I D1 Pack Weight
mm mm mm mm m kg/m
90 10,1 4000 92,0 4 2,673

Download installation manual of product: Wavin STABI PLUS pipe Wavin STABI PLUS pipe

WAVIN ECOPLASTIK PPRC Pipe FIBER BASALT PLUS S 3,2, cost of 1 m, d 25x3,5 [Code number: STRFB025TRCT]

Details
STRFB025TRCT 230 rub

Pipe FIBER BASALT PLUS can be used for the installation of water supply systems and high-temperature heating systems.

The main advantages of FIBER BASALT PLUS pipes:

  • Increased pressure resistance at high temperatures compared with other types of pipes, including FIBER pipes;
  • Temperature resistance - the pipe can withstand temperatures up to +90 °C;
  • High flow rate;
  • Low linear thermal expansion;
  • It does not require shaving before welding.

The pipe consists of 3 layers: inner and outer layers are made of PP-RCT, polypropylene of new generation, and middle layer is made of PP-RCT with basalt fiber, which increases the strength and pressure resistance of pipe.

Pipe FIBER BASALT PLUS can withstand pressure up to 10 bar at the operating temperature up to +70 °C and pressures up to 8 bar at the maximum operating temperature (+90 °C).

Thermal linear expansion: 0.05 mm/m/°C.

D t I Pack Weight
mm mm mm m kg/m
25 3,5 4000 60 0,239

Download installation manual of product: FIBER BASALT PLUS pipe FIBER BASALT PLUS pipe

WAVIN ECOPLASTIK PPRC Pipe FIBER BASALT PLUS S 3,2, cost of 1 m, d63x8,6 [Code number: STRFB063TRCT]

Details
STRFB063TRCT 1 257 rub

Pipe FIBER BASALT PLUS can be used for the installation of water supply systems and high-temperature heating systems.

The main advantages of FIBER BASALT PLUS pipes:

  • Increased pressure resistance at high temperatures compared with other types of pipes, including FIBER pipes;
  • Temperature resistance - the pipe can withstand temperatures up to +90 °C;
  • High flow rate;
  • Low linear thermal expansion;
  • It does not require shaving before welding.

The pipe consists of 3 layers: inner and outer layers are made of PP-RCT, polypropylene of new generation, and middle layer is made of PP-RCT with basalt fiber, which increases the strength and pressure resistance of pipe.

Pipe FIBER BASALT PLUS can withstand pressure up to 10 bar at the operating temperature up to +70 °C and pressures up to 8 bar at the maximum operating temperature (+90 °C).

Thermal linear expansion: 0.05 mm/m/°C.

D t I Pack Weight
mm mm mm m kg/m
63 8,6 4000 12 1,471

Download installation manual of product: FIBER BASALT PLUS pipe FIBER BASALT PLUS pipe

Wavin Ecoplastik Therm Pipe THERM PLUS, cost of 1 m, d 32 [Code number: BTRS032TRCT]

Details
BTRS032TRCT 381 rub

Wavin Ekoplastik Therm Plus pipes belong to a new generation of Wavin pipes. They consist of three layers:

  • Outer layer made of PPR;
  • AL middle layer without perforation;
  • Inner layer of PP-RCT.

The Ekoplastik Therm pipes provide the following advantages:

  • High resistance to temperature and pressure at temperatures up to +90 °C;
  • Increased flow area;
  • 100% oxygen barrier;
  • Low linear expansion;
  • Diameters from 20 to 40 mm;
  • Full range of fittings and a wide range of special components;
  • Service life of about 50 years.
D t I D1 Weight
mm mm mm mm kg/m
32 4,4 4000 33,9 0,470

Download installation manual of product: Труба Wavin Ekoplastik Therm Wavin Ekoplastik Therm pipe

WAVIN ECOPLASTIK PPRC Pipe, PN 20, cost of 1 m, d63x10,5 [Code number: STR063P20X]

Details
STR063P20X 726 rub

WAVIN EKOPLASTIK PPRC pipes can be used:

  • For installation of cold water supply systems;
  • For installation of hot water supply systems and central heating systems (at temperatures up to +70 °C).

Pipes are made of Type 3 polypropylene (PPR).

Operating parameters of PPR piping systems are presented here.

D t I Pack Weight
mm mm mm m kg/m
63 10,5 4000 12 1,611

Download installation manual of product: Wavin Ekoplastik pipe Wavin Ekoplastik pipe

Wavin Ecoplastik Therm Pipe THERM PLUS, cost of 1 m, d 20 [Code number: BTRS020TRCT]

Details
BTRS020TRCT 174 rub

Wavin Ekoplastik Therm Plus pipes belong to a new generation of Wavin pipes. They consist of three layers:

  • Outer layer made of PPR;
  • AL middle layer without perforation;
  • Inner layer of PP-RCT.

The Ekoplastik Therm pipes provide the following advantages:

  • High resistance to temperature and pressure at temperatures up to +90 °C;
  • Increased flow area;
  • 100% oxygen barrier;
  • Low linear expansion;
  • Diameters from 20 to 40 mm;
  • Full range of fittings and a wide range of special components;
  • Service life of about 50 years.
D t I D1 Weight
mm mm mm mm kg/m
20 2,8 4000 21,9 0,215

Download installation manual of product: Труба Wavin Ekoplastik Therm Wavin Ekoplastik Therm pipe

Wavin Ecoplastik Therm Pipe, PN 20, cost of 0,4 m, d 25x4,2 [Code number: BTR025P204]

Details
BTR025P204 61 rub

The connecting pipe is used when length of THERM PLUS pipe is below 70 mm, so that it can not be scalped.

Wavin Ekoplastik Therm Plus pipes belong to a new generation of Wavin pipes. They consist of three layers:

  • Outer layer made of PPR;
  • AL middle layer without perforation;
  • Inner layer of PP-RCT.

The Ekoplastik Therm pipes provide the following advantages:

  • High resistance to temperature and pressure at temperatures up to +90 °C;
  • Increased flow area;
  • 100% oxygen barrier;
  • Low linear expansion;
  • Diameters from 20 to 40 mm;
  • Full range of fittings and a wide range of special components;
  • Service life of about 50 years.
D t l Weight
mm mm mm kg/pc
25 4,2 400 0,129

Download installation manual of product: Труба Wavin Ekoplastik Therm Wavin Ekoplastik Therm pipe

WAVIN ECOPLASTIK PPRC Pipe in coil, PN 16, cost of 1 m, d 16x2,2 [Code number: STRK016P17]

Details
STRK016P17 59 rub

WAVIN EKOPLASTIK PPRC pipes can be used:

  • For installation of cold water supply systems;
  • For installation of hot water supply systems and underfloor heating.

Pipes are made of Type 3 polypropylene (PPR).

Operating parameters of PPR piping systems are presented here.

D S (PN) SDR t I Weight
mm     mm m kg/m
16 3,2 (16) 7,4 2,2 100 0,094

Download installation manual of product: Труба Wavin Ekoplastik Therm Wavin Ekoplastik pipe

WAVIN ECOPLASTIK PPRC Pipe, PN 16, cost of 1 m, d 20x2,8 [Code number: STR020P16X]

Details
STR020P16X 64 rub

WAVIN EKOPLASTIK PPRC pipes can be used:

  • For installation of cold water supply systems;
  • For installation of hot water supply systems and underfloor heating.

Pipes are made of Type 3 polypropylene (PPR).

Operating parameters of PPR piping systems are presented here.

D t I Pack Weight
mm mm mm m kg/m
20 2,8 4000 100 0,145

Download installation manual of product: Wavin Ekoplastik pipe Wavin Ekoplastik pipe

WAVIN ECOPLASTIK PPRC Pipe, PN 16, cost of 1 m, d75x10,3 [Code number: STR075P16X]

Details
STR075P16X 942 rub

WAVIN EKOPLASTIK PPRC pipes can be used:

  • For installation of cold water supply systems;
  • For installation of hot water supply systems and underfloor heating.

Pipes are made of Type 3 polypropylene (PPR).

Operating parameters of PPR piping systems are presented here.

D t I Pack Weight
mm mm mm m kg/m
75 10,3 4000 8 1,990

Download installation manual of product: Wavin Ekoplastik pipe Wavin Ekoplastik pipe

WAVIN ECOPLASTIK PPRC Pipe, PN 20, cost of 1 m, d40x6,7 [Code number: STR040P20X]

Details
STR040P20X 296 rub

WAVIN EKOPLASTIK PPRC pipes can be used:

  • For installation of cold water supply systems;
  • For installation of hot water supply systems and central heating systems (at temperatures up to +70 °C).

Pipes are made of Type 3 polypropylene (PPR).

Operating parameters of PPR piping systems are presented here.

D t I Pack Weight
mm mm mm m kg/m
40 6,7 4000 24 0,657

Download installation manual of product: Wavin Ekoplastik pipe Wavin Ekoplastik pipe

WAVIN ECOPLASTIK PPRC Pipe in coil, PN 16, cost of 1 m, d 20x2,8 [Code number: STRK020P17]

Details
STRK020P17 71 rub

WAVIN EKOPLASTIK PPRC pipes can be used:

  • For installation of cold water supply systems;
  • For installation of hot water supply systems and underfloor heating.

Pipes are made of Type 3 polypropylene (PPR).

Operating parameters of PPR piping systems are presented here.

D S (PN) SDR t I Weight
mm     mm m kg/m
20 3,2 (16) 7,4 2,8 100 0,145

Download installation manual of product: Wavin Ekoplastik pipe Wavin Ekoplastik pipe

WAVIN ECOPLASTIK PPRC Pipe FIBER BASALT PLUS S 3,2, cost of 1 m, d40x5,5 [Code number: STRFB040TRCT]

Details
STRFB040TRCT 500 rub

Pipe FIBER BASALT PLUS can be used for the installation of water supply systems and high-temperature heating systems.

The main advantages of FIBER BASALT PLUS pipes:

  • Increased pressure resistance at high temperatures compared with other types of pipes, including FIBER pipes;
  • Temperature resistance - the pipe can withstand temperatures up to +90 °C;
  • High flow rate;
  • Low linear thermal expansion;
  • It does not require shaving before welding.

The pipe consists of 3 layers: inner and outer layers are made of PP-RCT, polypropylene of new generation, and middle layer is made of PP-RCT with basalt fiber, which increases the strength and pressure resistance of pipe.

Pipe FIBER BASALT PLUS can withstand pressure up to 10 bar at the operating temperature up to +70 °C and pressures up to 8 bar at the maximum operating temperature (+90 °C).

Thermal linear expansion: 0.05 mm/m/°C.

D t I Pack Weight
mm mm mm m kg/m
40 5,5 4000 24 0,599

Download installation manual of product: FIBER BASALT PLUS pipe FIBER BASALT PLUS pipe

WAVIN ECOPLASTIK PPRC Pipe FIBER BASALT PLUS S 4, cost of 1 m, d125x14,0 [Code number: STRFB125TRCT]

Details
STRFB125TRCT 4 890 rub

Pipe FIBER BASALT PLUS can be used for the installation of water supply systems and high-temperature heating systems.

The main advantages of FIBER BASALT PLUS pipes:

  • Increased pressure resistance at high temperatures compared with other types of pipes, including FIBER pipes;
  • Temperature resistance - the pipe can withstand temperatures up to +90 °C;
  • High flow rate;
  • Low linear thermal expansion;
  • It does not require shaving before welding.

The pipe consists of 3 layers: inner and outer layers are made of PP-RCT, polypropylene of new generation, and middle layer is made of PP-RCT with basalt fiber, which increases the strength and pressure resistance of pipe.

Pipe FIBER BASALT PLUS can withstand pressure up to 10 bar at the operating temperature up to +70 °C and pressures up to 8 bar at the maximum operating temperature (+90 °C).

Thermal linear expansion: 0.05 mm/m/°C.

D t I Pack Weight
mm mm mm m kg/m
125 14,0 4000 4 4,891

Download installation manual of product: FIBER BASALT PLUS pipe FIBER BASALT PLUS pipe

WAVIN ECOPLASTIK PPRC Pipe, PN 10, cost of 1 m, d 50x4,6 [Code number: STR050P10X]

Details
STR050P10X 368 rub

WAVIN EKOPLASTIK PPRC pipes can be used:

  • For installation of cold water supply systems;
  • For installation of underfloor heating systems.

Pipes are made of Type 3 polypropylene (PPR).

Operating parameters of PPR piping systems are presented here.

D t I Pack Weight
mm mm mm m kg/m
50 4,6 4000 16 0,636

Download installation manual of product: Wavin Ekoplastik pipe Wavin Ekoplastik pipe

WAVIN ECOPLASTIK PPRC Pipe, PN 16, cost of 1 m, d125x17,1 [Code number: STR125P16X]

Details
STR125P16X 3 070 rub

WAVIN EKOPLASTIK PPRC pipes can be used:

  • For installation of cold water supply systems;
  • For installation of hot water supply systems and underfloor heating.

Pipes are made of Type 3 polypropylene (PPR).

Operating parameters of PPR piping systems are presented here.

D t I Pack Weight
mm mm mm m kg/m
125 17,1 4000 4 5,530

Download installation manual of product: Wavin Ekoplastik pipe Wavin Ekoplastik pipe

WAVIN ECOPLASTIK PPRC Pipe, PN 20, cost of 1 m, d75x12,5 [Code number: STR075P20X]

Details
STR075P20X 1 148 rub

WAVIN EKOPLASTIK PPRC pipes can be used:

  • For installation of cold water supply systems;
  • For installation of hot water supply systems and central heating systems (at temperatures up to +70 °C).

Pipes are made of Type 3 polypropylene (PPR).

Operating parameters of PPR piping systems are presented here.

D t I Pack Weight
mm mm mm m kg/m
75 12,5 4000 8 2,288

Download installation manual of product: Wavin Ekoplastik pipe Wavin Ekoplastik pipe

WAVIN ECOPLASTIK PPRC Pipe in coil, PN 20, cost of 1 m, d 20x3,4 [Code number: STRK020P21]

Details
STRK020P21 78 rub

WAVIN EKOPLASTIK PPRC pipes can be used:

  • For installation of cold water supply systems;
  • For installation of hot water supply systems and central heating systems (at temperatures up to +70 °C).

Pipes are made of Type 3 polypropylene (PPR).

Operating parameters of PPR piping systems are presented here.

D S (PN) SDR t I Weight
mm     mm m kg/m
20 2,5 (20) 6 3,4 100 0,169

Download installation manual of product: Wavin Ekoplastik pipe Wavin Ekoplastik pipe

WAVIN ECOPLASTIK PPRC Pipe STABI PLUS, cost of 1 m, d40 [Code number: STRS040RCT]

Details
STRS040RCT 498 rub

Pipe STABI PLUS is three-layer pipe:

  • Inner layer made of Type 4 polypropylene (PP-RCT) and has wall thickness as the pipe S 3,2 and S 4;
  • Middle layer of aluminum;
  • Outer layer made of polypropylene.

During the production the inner pipe is associated with the aluminum layer and then it is covered with an outer layer of polypropylene. Thanks to the non-perforated aluminum layer the STABI PLUS pipes have an 100% oxygen barrier. Thin polypropylene layer protects the aluminum layer against mechanical damage.

The main advantages of STABI PLUS pipes:

  • Increased stiffness;
  • Linear expansion is 3 times lower than that of conventional polypropylene pipes;
  • Is suitable for hot water and central heating;
  • Oxygen barrier.

Operating parameters of PPR piping systems are presented here.

D t I D1 Pack Weight
mm mm mm mm m kg/m
40 5,5 4000 41,9 20 0,692

Download installation manual of product: Wavin STABI PLUS pipe Wavin STABI PLUS pipe

WAVIN ECOPLASTIK PPRC Pipe STABI PLUS, cost of 1 m, d50 [Code number: STRS050RCT]

Details
STRS050RCT 753 rub

Pipe STABI PLUS is three-layer pipe:

  • Inner layer made of Type 4 polypropylene (PP-RCT) and has wall thickness as the pipe S 3,2 and S 4;
  • Middle layer of aluminum;
  • Outer layer made of polypropylene.

During the production the inner pipe is associated with the aluminum layer and then it is covered with an outer layer of polypropylene. Thanks to the non-perforated aluminum layer the STABI PLUS pipes have an 100% oxygen barrier. Thin polypropylene layer protects the aluminum layer against mechanical damage.

The main advantages of STABI PLUS pipes:

  • Increased stiffness;
  • Linear expansion is 3 times lower than that of conventional polypropylene pipes;
  • Is suitable for hot water and central heating;
  • Oxygen barrier.

Operating parameters of PPR piping systems are presented here.

D t I D1 Pack Weight
mm mm mm mm m kg/m
50 6,9 4000 52,0 16 1,046

Download installation manual of product: Wavin STABI PLUS pipe Wavin STABI PLUS pipe

Wavin Ecoplastik Therm Pipe THERM PLUS, cost of 1 m, d 25 [Code number: BTRS025TRCT]

Details
BTRS025TRCT 253 rub

Wavin Ekoplastik Therm Plus pipes belong to a new generation of Wavin pipes. They consist of three layers:

  • Outer layer made of PPR;
  • AL middle layer without perforation;
  • Inner layer of PP-RCT.

The Ekoplastik Therm pipes provide the following advantages:

  • High resistance to temperature and pressure at temperatures up to +90 °C;
  • Increased flow area;
  • 100% oxygen barrier;
  • Low linear expansion;
  • Diameters from 20 to 40 mm;
  • Full range of fittings and a wide range of special components;
  • Service life of about 50 years.
D t I D1 Weight
mm mm mm mm kg/m
25 3,5 4000 26,9 0,311

Download installation manual of product: Труба Wavin Ekoplastik Therm Wavin Ekoplastik Therm pipe

See also